lkml.org 
[lkml]   [2018]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] hwspinlock: add STM32 hwspinlock device
On Wed 31 Oct 02:30 PDT 2018, Benjamin Gaignard wrote:
> diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
> index e895d29500ee..e1a20b460590 100644
> --- a/drivers/hwspinlock/Kconfig
> +++ b/drivers/hwspinlock/Kconfig
> @@ -59,3 +59,12 @@ config HSEM_U8500
> SoC.
>
> If unsure, say N.
> +
> +config HWSPINLOCK_STM32

Please keep these alphabetically sorted.

> + tristate "STM32 Hardware Spinlock device"
> + depends on MACH_STM32MP157
> + depends on HWSPINLOCK
> + help
> + Say y here to support the STM32 Hardware Spinlock device.
> +
> + If unsure, say N.
> diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
> index b87c01a506a4..c0a9505b4dcf 100644
> --- a/drivers/hwspinlock/Makefile
> +++ b/drivers/hwspinlock/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o
> obj-$(CONFIG_HWSPINLOCK_SIRF) += sirf_hwspinlock.o
> obj-$(CONFIG_HWSPINLOCK_SPRD) += sprd_hwspinlock.o
> obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
> +obj-$(CONFIG_HWSPINLOCK_STM32) += stm32_hwspinlock.o

Ditto.

> diff --git a/drivers/hwspinlock/stm32_hwspinlock.c b/drivers/hwspinlock/stm32_hwspinlock.c
> new file mode 100644
> index 000000000000..6a0fafac7389
> --- /dev/null
> +++ b/drivers/hwspinlock/stm32_hwspinlock.c
> @@ -0,0 +1,147 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) STMicroelectronics SA 2018
> + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
> + * License terms: GNU General Public License (GPL), version 2

Didn't you already state your license terms with the SPDX header above?

> + */
[..]
> +static int stm32_hwspinlock_remove(struct platform_device *pdev)
> +{
> + struct stm32_hwspinlock *hw = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = hwspin_lock_unregister(&hw->bank);
> + if (ret) {
> + dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
> + return ret;

The return value of platform_device is ignored, so printing an error
message is fine, but don't "abort".

> + }
> +
> + pm_runtime_disable(&pdev->dev);
> +
> + return 0;
> +}

Regards,
Bjorn

\
 
 \ /
  Last update: 2018-11-08 07:44    [W:0.074 / U:4.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site