lkml.org 
[lkml]   [2018]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: hwmon: tmp108: add optional interrupts and #thermal-sensor-cells
Hi,

On Wed, Nov 07, 2018 at 04:47:08PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
>
> The tmp108 does have an alert output that can be used as interrupt source
> and can of course also be used as part of a thermal sensor setup for things
> like thermal-based cpu frequencies, so document the necessary properties.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>

Do you also plan to actually implement interrupt support in the driver ?

Guenter

> ---
> Documentation/devicetree/bindings/hwmon/tmp108.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt
> index 8c4b10df86d9..54d4beed4ee5 100644
> --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt
> +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt
> @@ -7,6 +7,10 @@ Requires node properties:
> - compatible : "ti,tmp108"
> - reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b.
>
> +Optional properties:
> +- interrupts: Reference to the TMP108 alert interrupt.
> +- #thermal-sensor-cells: should be set to 0.
> +
> Example:
> tmp108@48 {
> compatible = "ti,tmp108";
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-11-07 19:40    [W:0.059 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site