lkml.org 
[lkml]   [2018]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2 03/17] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
On Sun, Oct 21, 2018 at 11:54:47PM +0300, Dmitry Osipenko wrote:
> Add device-tree binding that describes CPU frequency-scaling hardware
> found on NVIDIA Tegra20/30 SoC's.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> .../cpufreq/nvidia,tegra20-cpufreq.txt | 96 +++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> new file mode 100644
> index 000000000000..a8023ea7a99f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> @@ -0,0 +1,96 @@
> +Binding for NVIDIA Tegra20 CPUFreq
> +==================================
> +
> +Required properties:
> +- clocks: Must contain an entry for each entry in clock-names.
> + See ../clocks/clock-bindings.txt for details.
> +- clock-names: Must include the following entries:
> + - pll_x: main-parent for CPU clock, must be the first entry
> + - intermediate: intermediate-parent for CPU clock
> + - cclk: the CPU clock
> +- operating-points-v2: See ../bindings/opp/opp.txt for details.
> +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
> +
> +For each opp entry in 'operating-points-v2' table:
> +- opp-supported-hw: Two bitfields indicating:
> + On Tegra20:
> + 1. CPU process ID mask
> + 2. SoC speedo ID mask
> +
> + On Tegra30:
> + 1. CPU process ID mask
> + 2. CPU speedo ID mask
> +
> + A bitwise AND is performed against these values and if any bit
> + matches, the OPP gets enabled.
> +
> +- opp-microvolt: CPU voltage triplet.
> +
> +Optional properties:
> +- cpu-supply: Phandle to the CPU power supply.
> +- core-supply: Phandle to the CORE power supply.
> +- rtc-supply: Phandle to the RTC power supply, required only for Tegra20.
> +
> +Voltage supply requirements:
> +- Tegra20:
> + CORE and RTC regulators must be coupled using the regulator-coupled-with
> + property and regulator-coupled-max-spread property must be set to no
> + more than 170mV.
> +
> + See ../regulator/regulator.txt for more detail about the properties.
> +
> +- Tegra30:
> + CORE and CPU regulators must be coupled using the regulator-coupled-with
> + property and regulator-coupled-max-spread property must be set to no
> + more than 300mV. Each of CORE and CPU regulators must set
> + regulator-max-step-microvolt property to no more than 100mV.
> +
> + See ../regulator/regulator.txt for more detail about the properties.
> +
> +
> +Example:
> + regulators {
> + cpu_reg: regulator0 {
> + regulator-name = "vdd_cpu";
> + };
> +
> + core_reg: regulator1 {
> + regulator-name = "vdd_core";
> + regulator-coupled-with = <&rtc_reg>;
> + regulator-coupled-max-spread = <170000>;
> + };
> +
> + rtc_reg: regulator2 {
> + regulator-name = "vdd_rtc";
> + regulator-coupled-with = <&core_reg>;
> + regulator-coupled-max-spread = <170000>;
> + };
> + };
> +
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> +
> + opp@456000000 {
> + clock-latency-ns = <125000>;
> + opp-microvolt = <825000 825000 1125000>;
> + opp-supported-hw = <0x03 0x0001>;
> + opp-hz = /bits/ 64 <456000000>;
> + };
> +
> + ...
> + };
> +
> + cpus {
> + cpu@0 {
> + compatible = "arm,cortex-a9";
> + clocks = <&tegra_car TEGRA20_CLK_PLL_X>,
> + <&tegra_car TEGRA20_CLK_PLL_P>,
> + <&tegra_car TEGRA20_CLK_CCLK>;
> + clock-names = "pll_x", "intermediate", "cclk";

I still object to having clocks (and supplies) which don't reflect the
h/w and are documented in the CA9 TRM.

> + operating-points-v2 = <&cpu0_opp_table>;
> + cpu-supply = <&cpu_reg>;
> + core-supply = <&core_reg>;
> + rtc-supply = <&rtc_reg>;

Supplies are suspect too, but perhaps supplies and power domains are
beyond the scope of the TRM and part of the physical design.

Rob

\
 
 \ /
  Last update: 2018-11-05 22:31    [W:0.207 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site