lkml.org 
[lkml]   [2018]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v4 00/13] ktask: multithread CPU-intensive kernel work
Date
Hi,

This version addresses some of the feedback from Andrew and Michal last year
and describes the plan for tackling the rest. I'm posting now since I'll be
presenting ktask at Plumbers next week.

Andrew, you asked about parallelizing in more places[0]. This version adds
multithreading for VFIO page pinning, and there are more planned users listed
below.

Michal, you mentioned that ktask should be sensitive to CPU utilization[1].
ktask threads now run at the lowest priority on the system to avoid disturbing
busy CPUs (more details in patches 4 and 5). Does this address your concern?
The plan to address your other comments is explained below.

Alex, any thoughts about the VFIO changes in patches 6-9?

Tejun and Lai, what do you think of patch 5?

And for everyone, questions and comments welcome. Any suggestions for more
users?

Thanks,
Daniel

P.S. This series is big to address the above feedback, but I can send patches
7 and 8 separately.


TODO
----

- Implement cgroup-aware unbound workqueues in a separate series, picking up
Bandan Das's effort from two years ago[2]. This should hopefully address
Michal's comment about running ktask threads within the limits of the calling
context[1].

- Make ktask aware of power management. A starting point is to disable the
framework when energy-conscious cpufreq settings are enabled (e.g.
powersave, conservative scaling governors). This should address another
comment from Michal about keeping CPUs under power constraints idle[1].

- Add more users. On my list:
- __ib_umem_release in IB core, which Jason Gunthorpe mentioned[3]
- XFS quotacheck and online repair, as suggested by Darrick Wong
- vfs object teardown at umount time, as Andrew mentioned[0]
- page freeing in munmap/exit, as Aaron Lu posted[4]
- page freeing in shmem
The last three will benefit from scaling zone->lock and lru_lock.

- CPU hotplug support for ktask to adjust its per-CPU data and resource
limits.

- Check with IOMMU folks that iommu_map is safe for all IOMMU backend
implementations (it is for x86).


Summary
-------

A single CPU can spend an excessive amount of time in the kernel operating
on large amounts of data. Often these situations arise during initialization-
and destruction-related tasks, where the data involved scales with system size.
These long-running jobs can slow startup and shutdown of applications and the
system itself while extra CPUs sit idle.

To ensure that applications and the kernel continue to perform well as core
counts and memory sizes increase, harness these idle CPUs to complete such jobs
more quickly.

ktask is a generic framework for parallelizing CPU-intensive work in the
kernel. The API is generic enough to add concurrency to many different kinds
of tasks--for example, zeroing a range of pages or evicting a list of
inodes--and aims to save its clients the trouble of splitting up the work,
choosing the number of threads to use, maintaining an efficient concurrency
level, starting these threads, and load balancing the work between them.

The first patch has more documentation, and the second patch has the interface.

Current users:
1) VFIO page pinning before kvm guest startup (others hitting slowness too[5])
2) deferred struct page initialization at boot time
3) clearing gigantic pages
4) fallocate for HugeTLB pages

This patchset is based on the 2018-10-30 head of mmotm/master.

Changelog:

v3 -> v4:
- Added VFIO page pinning use case (Andrew's "more users" comment)
- Made ktask helpers run at the lowest priority on the system (Michal's
concern about sensitivity to CPU utilization)
- ktask learned to undo part of a task on error (required for VFIO)
- Changed mm->locked_vm to an atomic to improve performance for VFIO. This can
be split out into a smaller series (there wasn't time before posting this)
- Removed /proc/sys/debug/ktask_max_threads (it was a debug-only thing)
- Some minor improvements in the ktask code itself (shorter, cleaner, etc)
- Updated Documentation to cover these changes

v2 -> v3:
- Changed cpu to CPU in the ktask Documentation, as suggested by Randy Dunlap
- Saved more boot time now that Pavel Tatashin's deferred struct page init
patches are in mainline (https://lkml.org/lkml/2017/10/13/692). New
performance results in patch 7.
- Added resource limits, per-node and system-wide, to maintain efficient
concurrency levels (addresses a concern from my Plumbers talk)
- ktask no longer allocates memory internally during a task so it can be used
in sensitive contexts
- Added the option to run work anywhere on the system rather than always
confining it to a specific node
- Updated Documentation patch with these changes and reworked motivation
section

v1 -> v2:
- Added deferred struct page initialization use case.
- Explained the source of the performance improvement from parallelizing
clear_gigantic_page (comment from Dave Hansen).
- Fixed Documentation and build warnings from CONFIG_KTASK=n kernels.

ktask v3 RFC: lkml.kernel.org/r/20171205195220.28208-1-daniel.m.jordan@oracle.com

[0] https://lkml.kernel.org/r/20171205142300.67489b1a90605e1089c5aaa9@linux-foundation.org
[1] https://lkml.kernel.org/r/20171206143509.GG7515@dhcp22.suse.cz
[2] https://lkml.kernel.org/r/1458339291-4093-1-git-send-email-bsd@redhat.com
[3] https://lkml.kernel.org/r/20180928153922.GA17076@ziepe.ca
[4] https://lkml.kernel.org/r/1489568404-7817-1-git-send-email-aaron.lu@intel.com
[5] https://www.redhat.com/archives/vfio-users/2018-April/msg00020.html

Daniel Jordan (13):
ktask: add documentation
ktask: multithread CPU-intensive kernel work
ktask: add undo support
ktask: run helper threads at MAX_NICE
workqueue, ktask: renice helper threads to prevent starvation
vfio: parallelize vfio_pin_map_dma
mm: change locked_vm's type from unsigned long to atomic_long_t
vfio: remove unnecessary mmap_sem writer acquisition around locked_vm
vfio: relieve mmap_sem reader cacheline bouncing by holding it longer
mm: enlarge type of offset argument in mem_map_offset and mem_map_next
mm: parallelize deferred struct page initialization within each node
mm: parallelize clear_gigantic_page
hugetlbfs: parallelize hugetlbfs_fallocate with ktask

Documentation/core-api/index.rst | 1 +
Documentation/core-api/ktask.rst | 213 +++++++++
arch/powerpc/kvm/book3s_64_vio.c | 15 +-
arch/powerpc/mm/mmu_context_iommu.c | 16 +-
drivers/fpga/dfl-afu-dma-region.c | 16 +-
drivers/vfio/vfio_iommu_spapr_tce.c | 14 +-
drivers/vfio/vfio_iommu_type1.c | 159 ++++---
fs/hugetlbfs/inode.c | 114 ++++-
fs/proc/task_mmu.c | 2 +-
include/linux/ktask.h | 267 ++++++++++++
include/linux/mm_types.h | 2 +-
include/linux/workqueue.h | 5 +
init/Kconfig | 11 +
init/main.c | 2 +
kernel/Makefile | 2 +-
kernel/fork.c | 2 +-
kernel/ktask.c | 646 ++++++++++++++++++++++++++++
kernel/workqueue.c | 106 ++++-
mm/debug.c | 3 +-
mm/internal.h | 7 +-
mm/memory.c | 32 +-
mm/mlock.c | 4 +-
mm/mmap.c | 18 +-
mm/mremap.c | 6 +-
mm/page_alloc.c | 91 +++-
25 files changed, 1599 insertions(+), 155 deletions(-)
create mode 100644 Documentation/core-api/ktask.rst
create mode 100644 include/linux/ktask.h
create mode 100644 kernel/ktask.c

--
2.19.1

\
 
 \ /
  Last update: 2018-11-05 17:58    [W:0.375 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site