lkml.org 
[lkml]   [2018]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 16/25] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator
On Mon, Oct 29, 2018 at 08:18:05PM +0530, Jagan Teki wrote:
> On Mon, Oct 29, 2018 at 3:01 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Fri, Oct 26, 2018 at 08:13:35PM +0530, Jagan Teki wrote:
> > > Some boards have VCC-DSI pin connected to voltage regulator which may
> > > not be turned on by default.
> > >
> > > Add support for such boards by adding voltage regulator handling code to
> > > MIPI DSI driver.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > Tested-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > Changes for v3:
> > > - new patch
> > > Changes for v2:
> > > - none
> > >
> > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++
> > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 3 +++
> > > 2 files changed, 17 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > index 42bd7506abaf..bc57343592e0 100644
> > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > @@ -949,6 +949,12 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
> > >
> > > dsi->drv = drv;
> > >
> > > + ret = regulator_enable(dsi->regulator);
> > > + if (ret) {
> > > + dev_err(dev, "Failed to enable regulator\n");
> > > + return ret;
> > > + }
> > > +
> >
> > The regulator should be enabled only when the device is in use.
>
> True, but there is no device specific quirk needed because who ever
> not needed simply use dummy regulator
> [ 0.245821] sun6i-mipi-dsi 1ca0000.dsi: 1ca0000.dsi supply vcc-dsi
> not found, using dummy regulato
> r
>
> even like HVCC in hdmi driver [1]
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c?id=633ba1e086e1abbeef1ffd899911de8cf3987d9f

That's not my point. You should enable the regulator only when the DSI
bridge is being enabled, not when the driver has probed.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-05 09:35    [W:0.063 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site