lkml.org 
[lkml]   [2018]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC PATCH v1 13/14] usb:cdns3: Adds debugging function.
Date
>> Patch implements some function used for debugging driver.
>[]
>> +static inline char *cdns3_decode_ep_irq(u32 ep_sts, const char *ep_name)
>> +{
>> + static char str[256];
>> + int ret;
>> +
>> + ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts);
>> +
>> + if (ep_sts & EP_STS_SETUP)
>> + ret += sprintf(str + ret, "SETUP ");
>> + if (ep_sts & EP_STS_IOC)
>> + ret += sprintf(str + ret, "IOC ");
>> + if (ep_sts & EP_STS_ISP)
>> + ret += sprintf(str + ret, "ISP ");
>> + if (ep_sts & EP_STS_DESCMIS)
>> + ret += sprintf(str + ret, "DESCMIS ");
>> + if (ep_sts & EP_STS_STREAMR)
>> + ret += sprintf(str + ret, "STREAMR ");
>> + if (ep_sts & EP_STS_MD_EXIT)
>> + ret += sprintf(str + ret, "MD_EXIT ");
>> + if (ep_sts & EP_STS_TRBERR)
>> + ret += sprintf(str + ret, "TRBERR ");
>> + if (ep_sts & EP_STS_NRDY)
>> + ret += sprintf(str + ret, "NRDY ");
>> + if (ep_sts & EP_STS_PRIME)
>> + ret += sprintf(str + ret, "PRIME ");
>> + if (ep_sts & EP_STS_SIDERR)
>> + ret += sprintf(str + ret, "SIDERRT ");
>> + if (ep_sts & EP_STS_OUTSMM)
>> + ret += sprintf(str + ret, "OUTSMM ");
>> + if (ep_sts & EP_STS_ISOERR)
>> + ret += sprintf(str + ret, "ISOERR ");
>> + if (ep_sts & EP_STS_IOT)
>> + ret += sprintf(str + ret, "IOT ");
>> +
>> + return str;
>> +}
>
>This bit is pretty unsightly.
>Especially the static in each inline

Hi Joe.

I understood that you mean line
static char str[256];
This array will be defined several times.

I will remove inline form function definition.
It's not necessary.

>> +
>> +char *cdns3_decode_epx_irq(struct cdns3_endpoint *priv_ep)
>> +{
>> + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
>> +
>> + return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> + priv_ep->name);
>> +}
>> +
>> +char *cdns3_decode_ep0_irq(struct cdns3_device *priv_dev, int dir)
>> +{
>> + if (dir)
>> + return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> + "ep0IN");
>> + else
>> + return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> + "ep0OUT");
>> +}
>> +
>[]
>> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
>[]
>> @@ -604,12 +604,15 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
>> cdns3_select_ep(priv_dev, 0 | (dir ? USB_DIR_IN : USB_DIR_OUT));
>> ep_sts_reg = readl(&regs->ep_sts);
>>
>> + dev_dbg(&priv_dev->dev, "%s\n", cdns3_decode_ep0_irq(priv_dev, dir));
>[]
>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>[]
>> @@ -537,6 +547,8 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
>> cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
>> ep_sts_reg = readl(&regs->ep_sts);
>>
>> + dev_dbg(&priv_dev->dev, "%s\n", cdns3_decode_epx_irq(priv_ep));
>>

Thank you for comment.
Cheers Pawel

\
 
 \ /
  Last update: 2018-11-05 07:19    [W:0.127 / U:8.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site