[lkml]   [2018]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH AUTOSEL 4.19 09/57] r8169: fix broken Wake-on-LAN from S5 (poweroff)
From: Heiner Kallweit <>

[ Upstream commit 649f0837a8cc2b39329f2de00fa0d04b029291c5 ]

It was reported that WoL from S5 is broken (WoL from S3 works) and the
analysis showed that during system shutdown the network interface was
brought down already when the actual kernel shutdown started.
Therefore netif_running() returned false and as a consequence the PHY
was suspended. Obviously WoL wasn't working then.
To fix this the original patch needs to be effectively reverted.
A side effect is that when normally bringing down the interface and
WoL is enabled the PHY will remain powered on (like it was before the
original patch).

Fixes: fe87bef01f9b ("r8169: don't check WoL when powering down PHY and interface is down")
Reported-by: Neil MacLeod <>
Signed-off-by: Heiner Kallweit <>
Signed-off-by: David S. Miller <>
Signed-off-by: Sasha Levin <>
drivers/net/ethernet/realtek/r8169.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 2c350099b83c..4930e0375c1d 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4175,10 +4175,15 @@ static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)

static bool rtl_wol_pll_power_down(struct rtl8169_private *tp)
- if (!netif_running(tp->dev) || !__rtl8169_get_wol(tp))
+ struct phy_device *phydev;
+ if (!__rtl8169_get_wol(tp))
return false;

- phy_speed_down(tp->dev->phydev, false);
+ /* phydev may not be attached to netdevice */
+ phydev = mdiobus_get_phy(tp->mii_bus, 0);
+ phy_speed_down(phydev, false);

return true;
 \ /
  Last update: 2018-11-04 15:09    [W:0.189 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site