lkml.org 
[lkml]   [2018]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 43/57] serial: 8250_of: Fix for lack of interrupt support
Date
From: John Garry <john.garry@huawei.com>

[ Upstream commit a27d938251ef40c43db81af16fc26b2cec181d4d ]

In commit c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ"), a
check was added for the UART driver being probed prior to the parent IRQ
controller.

Unfortunately this breaks certain boards which have no interrupt support,
like Huawei D03.

Indeed, the 8250 DT bindings state that interrupts should be supported -
not must.

To fix, switch from irq_of_parse_and_map() to of_irq_get(), which
does relay whether the IRQ host controller domain is not ready, i.e.
defer probe, instead of assuming it.

Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/8250/8250_of.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index af8beefe9b5c..877fd7f8a8ed 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -58,7 +58,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
u32 clk, spd, prop;
- int ret;
+ int ret, irq;

memset(port, 0, sizeof *port);

@@ -143,21 +143,27 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (ret >= 0)
port->line = ret;

- port->irq = irq_of_parse_and_map(np, 0);
- if (!port->irq) {
- ret = -EPROBE_DEFER;
- goto err_unprepare;
+ irq = of_irq_get(np, 0);
+ if (irq < 0) {
+ if (irq == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_unprepare;
+ }
+ /* IRQ support not mandatory */
+ irq = 0;
}

+ port->irq = irq;
+
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
ret = PTR_ERR(info->rst);
- goto err_dispose;
+ goto err_unprepare;
}

ret = reset_control_deassert(info->rst);
if (ret)
- goto err_dispose;
+ goto err_unprepare;

port->type = type;
port->uartclk = clk;
@@ -184,8 +190,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->handle_irq = fsl8250_handle_irq;

return 0;
-err_dispose:
- irq_dispose_mapping(port->irq);
err_unprepare:
clk_disable_unprepare(info->clk);
err_pmruntime:
--
2.17.1
\
 
 \ /
  Last update: 2018-11-04 15:06    [W:0.257 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site