lkml.org 
[lkml]   [2018]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 1/1] ARM: dts: imx6sx-sdb: Add flexcan support
On Sat, Oct 20, 2018 at 02:35:36AM +0000, Joakim Zhang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
>
> CAN transceiver is different on RevA and RevB board.
> It's active high on RevA while active low on Rev B.
>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++
> arch/arm/boot/dts/imx6sx-sdb.dts | 5 ++++
> arch/arm/boot/dts/imx6sx-sdb.dtsi | 42 +++++++++++++++++++++++++++
> 3 files changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> index 9cc6ff206aea..d98dcf00b9c4 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -10,6 +10,18 @@
>
> / {
> model = "Freescale i.MX6 SoloX SDB RevA Board";
> +
> + /* Transceiver EN/STBY is active high on RevA board */
> + reg_can_en: regulator-can-en {
> + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };

Please use label node to make it easier for both yourself and readers.

&reg_can_en {
...
};

Shawn

> +
> + reg_can_stby: regulator-can-stby {
> + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + vin-supply = <&reg_can_en>;
> + };
> };
>
> &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index 6dd9bebfe027..092b8de142a8 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -10,6 +10,11 @@
>
> / {
> model = "Freescale i.MX6 SoloX SDB RevB Board";
> +
> + /* Transceiver EN/STBY is active low on RevB board */
> + reg_can_stby: regulator-can-stby {
> + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
> + };
> };
>
> &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> index f8f31872fa14..e37ec4b396a2 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -136,6 +136,20 @@
> regulator-max-microvolt = <5000000>;
> };
>
> + reg_can_en: regulator-can-en {
> + compatible = "regulator-fixed";
> + regulator-name = "can-en";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_can_stby: regulator-can-stby {
> + compatible = "regulator-fixed";
> + regulator-name = "can-stby";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> sound {
> compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
> model = "wm8962-audio";
> @@ -202,6 +216,20 @@
> status = "okay";
> };
>
> +&flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + xceiver-supply = <&reg_can_stby>;
> + status = "okay";
> +};
> +
> +&flexcan2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + xceiver-supply = <&reg_can_stby>;
> + status = "okay";
> +};
> +
> &i2c3 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> @@ -397,6 +425,20 @@
> >;
> };
>
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
> + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
> + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
> + >;
> + };
> +
> pinctrl_gpio_keys: gpio_keysgrp {
> fsl,pins = <
> MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-11-04 08:28    [W:0.046 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site