lkml.org 
[lkml]   [2018]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] ARM: dts: imx6sx: Add DISPLAY power domain support
On Wed, Oct 31, 2018 at 12:17:50PM +0000, Leonard Crestez wrote:
> On 10/31/2018 8:12 AM, Shawn Guo wrote:
> > On Mon, Oct 08, 2018 at 06:06:23PM +0000, Leonard Crestez wrote:
> >> This was implemented in the driver but not actually defined and
> >> referenced in dts. This makes it always on.
> >>
> >> From reference manual in section "10.4.1.4.1 Power Distribution":
> >>
> >> "Display domain - The DISPLAY domain contains GIS, CSI, PXP, LCDIF,
> >> PCIe, DCIC, and LDB. It is supplied by internal regulator."
> >>
> >> The current pd_pcie is actually only for PCIE_PHY, the PCIE ip block is
> >> actually inside the DISPLAY domain. Handle this by adding the pcie node
> >> in both power domains.
> >>
> >> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> >
> > Applied, thanks.
>
> As mentioned in the cover letter this requires multi-PD support in
> imx-pci to be implemented, specifically PATCH 3/4 of this series:
>
> https://lore.kernel.org/patchwork/patch/996810/
>
> Unless that also gets merged soon via pci I expect issues in linux-next.
> The patch already has reviewed-by tags so "merging it soon" is not
> unreasonable.

Oops, I overlooked the notes in cover-letter. Let's use the approach as
suggested there - applying the dts change after all driver dependencies
are landed.

Patch dropped, sorry.

\
 
 \ /
  Last update: 2018-11-04 04:56    [W:0.140 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site