lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/7] mfd: stpmic1: add stpmic1 driver
Date
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.

Signed-off-by: Pascal Paillet <p.paillet@st.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes in v7: nothing

drivers/mfd/Kconfig | 16 ++++
drivers/mfd/Makefile | 1 +
drivers/mfd/stpmic1.c | 213 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 442 insertions(+)
create mode 100644 drivers/mfd/stpmic1.c
create mode 100644 include/linux/mfd/stpmic1.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8c5dfdc..0761cb8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1871,6 +1871,22 @@ config MFD_STM32_TIMERS
for PWM and IIO Timer. This driver allow to share the
registers between the others drivers.

+config MFD_STPMIC1
+ tristate "Support for STPMIC1 PMIC"
+ depends on (I2C=y && OF)
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
+ key, watchdog and regulator functionalities which are supported via
+ the relevant subsystems. This driver provides core support for the
+ STPMIC1. In order to use the actual functionaltiy of the device other
+ drivers must be enabled.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stpmic1.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 12980a4..a62fb01 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -233,6 +233,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o

obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
+obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o

obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
new file mode 100644
index 0000000..7dfbe89
--- /dev/null
+++ b/drivers/mfd/stpmic1.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com>
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+#define STPMIC1_MAIN_IRQ 0
+
+static const struct regmap_range stpmic1_readable_ranges[] = {
+ regmap_reg_range(TURN_ON_SR, VERSION_SR),
+ regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+ regmap_reg_range(BST_SW_CR, BST_SW_CR),
+ regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+ regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+ regmap_reg_range(INT_MASK_R1, INT_MASK_R4),
+ regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+ regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+ regmap_reg_range(INT_SRC_R1, INT_SRC_R1),
+};
+
+static const struct regmap_range stpmic1_writeable_ranges[] = {
+ regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+ regmap_reg_range(BST_SW_CR, BST_SW_CR),
+ regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+ regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+ regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+};
+
+static const struct regmap_range stpmic1_volatile_ranges[] = {
+ regmap_reg_range(TURN_ON_SR, VERSION_SR),
+ regmap_reg_range(WCHDG_CR, WCHDG_CR),
+ regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+ regmap_reg_range(INT_SRC_R1, INT_SRC_R4),
+};
+
+static const struct regmap_access_table stpmic1_readable_table = {
+ .yes_ranges = stpmic1_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_writeable_table = {
+ .yes_ranges = stpmic1_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_volatile_table = {
+ .yes_ranges = stpmic1_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges),
+};
+
+const struct regmap_config stpmic1_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = PMIC_MAX_REGISTER_ADDRESS,
+ .rd_table = &stpmic1_readable_table,
+ .wr_table = &stpmic1_writeable_table,
+ .volatile_table = &stpmic1_volatile_table,
+};
+
+static const struct regmap_irq stpmic1_irqs[] = {
+ REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01),
+ REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02),
+ REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04),
+ REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08),
+ REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10),
+ REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20),
+ REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40),
+ REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80),
+
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08),
+ REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10),
+ REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20),
+ REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40),
+ REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80),
+
+ REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20),
+ REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40),
+ REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80),
+
+ REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01),
+ REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02),
+ REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04),
+ REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08),
+ REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40),
+ REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80),
+};
+
+static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
+ .name = "pmic_irq",
+ .status_base = INT_PENDING_R1,
+ .mask_base = INT_CLEAR_MASK_R1,
+ .unmask_base = INT_SET_MASK_R1,
+ .ack_base = INT_CLEAR_R1,
+ .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
+ .irqs = stpmic1_irqs,
+ .num_irqs = ARRAY_SIZE(stpmic1_irqs),
+};
+
+static int stpmic1_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct stpmic1 *ddata;
+ struct device *dev = &i2c->dev;
+ int ret;
+ struct device_node *np = dev->of_node;
+ u32 reg;
+
+ ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, ddata);
+ ddata->dev = dev;
+
+ ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
+
+ ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
+ if (ddata->irq < 0) {
+ dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
+ return ddata->irq;
+ }
+
+ ret = regmap_read(ddata->regmap, VERSION_SR, &reg);
+ if (ret) {
+ dev_err(dev, "Unable to read PMIC version\n");
+ return ret;
+ }
+ dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);
+
+ /* Initialize PMIC IRQ Chip & associated IRQ domains */
+ ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ 0, &stpmic1_regmap_irq_chip,
+ &ddata->irq_data);
+ if (ret) {
+ dev_err(dev, "IRQ Chip registration failed: %d\n", ret);
+ return ret;
+ }
+
+ return devm_of_platform_populate(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stpmic1_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+
+ disable_irq(pmic_dev->irq);
+
+ return 0;
+}
+
+static int stpmic1_resume(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+ int ret;
+
+ ret = regcache_sync(pmic_dev->regmap);
+ if (ret)
+ return ret;
+
+ enable_irq(pmic_dev->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume);
+
+static const struct of_device_id stpmic1_of_match[] = {
+ { .compatible = "st,stpmic1", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stpmic1_of_match);
+
+static struct i2c_driver stpmic1_driver = {
+ .driver = {
+ .name = "stpmic1",
+ .of_match_table = of_match_ptr(stpmic1_of_match),
+ .pm = &stpmic1_pm,
+ },
+ .probe = stpmic1_probe,
+};
+
+module_i2c_driver(stpmic1_driver);
+
+MODULE_DESCRIPTION("STPMIC1 PMIC Driver");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h
new file mode 100644
index 0000000..fa3f99f
--- /dev/null
+++ b/include/linux/mfd/stpmic1.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#ifndef __LINUX_MFD_STPMIC1_H
+#define __LINUX_MFD_STPMIC1_H
+
+#define TURN_ON_SR 0x1
+#define TURN_OFF_SR 0x2
+#define ICC_LDO_TURN_OFF_SR 0x3
+#define ICC_BUCK_TURN_OFF_SR 0x4
+#define RREQ_STATE_SR 0x5
+#define VERSION_SR 0x6
+
+#define SWOFF_PWRCTRL_CR 0x10
+#define PADS_PULL_CR 0x11
+#define BUCKS_PD_CR 0x12
+#define LDO14_PD_CR 0x13
+#define LDO56_VREF_PD_CR 0x14
+#define VBUS_DET_VIN_CR 0x15
+#define PKEY_TURNOFF_CR 0x16
+#define BUCKS_MASK_RANK_CR 0x17
+#define BUCKS_MASK_RESET_CR 0x18
+#define LDOS_MASK_RANK_CR 0x19
+#define LDOS_MASK_RESET_CR 0x1A
+#define WCHDG_CR 0x1B
+#define WCHDG_TIMER_CR 0x1C
+#define BUCKS_ICCTO_CR 0x1D
+#define LDOS_ICCTO_CR 0x1E
+
+#define BUCK1_ACTIVE_CR 0x20
+#define BUCK2_ACTIVE_CR 0x21
+#define BUCK3_ACTIVE_CR 0x22
+#define BUCK4_ACTIVE_CR 0x23
+#define VREF_DDR_ACTIVE_CR 0x24
+#define LDO1_ACTIVE_CR 0x25
+#define LDO2_ACTIVE_CR 0x26
+#define LDO3_ACTIVE_CR 0x27
+#define LDO4_ACTIVE_CR 0x28
+#define LDO5_ACTIVE_CR 0x29
+#define LDO6_ACTIVE_CR 0x2A
+
+#define BUCK1_STDBY_CR 0x30
+#define BUCK2_STDBY_CR 0x31
+#define BUCK3_STDBY_CR 0x32
+#define BUCK4_STDBY_CR 0x33
+#define VREF_DDR_STDBY_CR 0x34
+#define LDO1_STDBY_CR 0x35
+#define LDO2_STDBY_CR 0x36
+#define LDO3_STDBY_CR 0x37
+#define LDO4_STDBY_CR 0x38
+#define LDO5_STDBY_CR 0x39
+#define LDO6_STDBY_CR 0x3A
+
+#define BST_SW_CR 0x40
+
+#define INT_PENDING_R1 0x50
+#define INT_PENDING_R2 0x51
+#define INT_PENDING_R3 0x52
+#define INT_PENDING_R4 0x53
+
+#define INT_DBG_LATCH_R1 0x60
+#define INT_DBG_LATCH_R2 0x61
+#define INT_DBG_LATCH_R3 0x62
+#define INT_DBG_LATCH_R4 0x63
+
+#define INT_CLEAR_R1 0x70
+#define INT_CLEAR_R2 0x71
+#define INT_CLEAR_R3 0x72
+#define INT_CLEAR_R4 0x73
+
+#define INT_MASK_R1 0x80
+#define INT_MASK_R2 0x81
+#define INT_MASK_R3 0x82
+#define INT_MASK_R4 0x83
+
+#define INT_SET_MASK_R1 0x90
+#define INT_SET_MASK_R2 0x91
+#define INT_SET_MASK_R3 0x92
+#define INT_SET_MASK_R4 0x93
+
+#define INT_CLEAR_MASK_R1 0xA0
+#define INT_CLEAR_MASK_R2 0xA1
+#define INT_CLEAR_MASK_R3 0xA2
+#define INT_CLEAR_MASK_R4 0xA3
+
+#define INT_SRC_R1 0xB0
+#define INT_SRC_R2 0xB1
+#define INT_SRC_R3 0xB2
+#define INT_SRC_R4 0xB3
+
+#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4
+
+#define STPMIC1_PMIC_NUM_IRQ_REGS 4
+
+#define TURN_OFF_SR_ICC_EVENT 0x08
+
+#define LDO_VOLTAGE_MASK GENMASK(6, 2)
+#define BUCK_VOLTAGE_MASK GENMASK(7, 2)
+#define LDO_BUCK_VOLTAGE_SHIFT 2
+
+#define LDO_ENABLE_MASK BIT(0)
+#define BUCK_ENABLE_MASK BIT(0)
+
+#define BUCK_HPLP_ENABLE_MASK BIT(1)
+#define BUCK_HPLP_SHIFT 1
+
+#define STDBY_ENABLE_MASK BIT(0)
+
+#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0)
+#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0)
+#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0)
+#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0)
+#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0)
+#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0)
+#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0)
+
+#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK1_PULL_DOWN_MASK BIT(0)
+#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK2_PULL_DOWN_MASK BIT(2)
+#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK3_PULL_DOWN_MASK BIT(4)
+#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK4_PULL_DOWN_MASK BIT(6)
+
+#define LDO1_PULL_DOWN_REG LDO14_PD_CR
+#define LDO1_PULL_DOWN_MASK BIT(0)
+#define LDO2_PULL_DOWN_REG LDO14_PD_CR
+#define LDO2_PULL_DOWN_MASK BIT(2)
+#define LDO3_PULL_DOWN_REG LDO14_PD_CR
+#define LDO3_PULL_DOWN_MASK BIT(4)
+#define LDO4_PULL_DOWN_REG LDO14_PD_CR
+#define LDO4_PULL_DOWN_MASK BIT(6)
+#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO5_PULL_DOWN_MASK BIT(0)
+#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO6_PULL_DOWN_MASK BIT(2)
+#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define VREF_DDR_PULL_DOWN_MASK BIT(4)
+
+#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0)
+#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0)
+
+#define LDO_BYPASS_MASK BIT(7)
+
+/* Main PMIC Control Register
+ * SWOFF_PWRCTRL_CR
+ * Address : 0x10
+ */
+#define ICC_EVENT_ENABLED BIT(4)
+#define PWRCTRL_POLARITY_HIGH BIT(3)
+#define PWRCTRL_PIN_VALID BIT(2)
+#define RESTART_REQUEST_ENABLED BIT(1)
+#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
+
+/* Main PMIC PADS Control Register
+ * PADS_PULL_CR
+ * Address : 0x11
+ */
+#define WAKEUP_DETECTOR_DISABLED BIT(4)
+#define PWRCTRL_PD_ACTIVE BIT(3)
+#define PWRCTRL_PU_ACTIVE BIT(2)
+#define WAKEUP_PD_ACTIVE BIT(1)
+#define PONKEY_PU_INACTIVE BIT(0)
+
+/* Main PMIC VINLOW Control Register
+ * VBUS_DET_VIN_CRC DMSC
+ * Address : 0x15
+ */
+#define SWIN_DETECTOR_ENABLED BIT(7)
+#define SWOUT_DETECTOR_ENABLED BIT(6)
+#define VINLOW_ENABLED BIT(0)
+#define VINLOW_CTRL_REG_MASK GENMASK(7, 0)
+
+/* USB Control Register
+ * Address : 0x40
+ */
+#define BOOST_OVP_DISABLED BIT(7)
+#define VBUS_OTG_DETECTION_DISABLED BIT(6)
+#define SW_OUT_DISCHARGE BIT(5)
+#define VBUS_OTG_DISCHARGE BIT(4)
+#define OCP_LIMIT_HIGH BIT(3)
+#define SWIN_SWOUT_ENABLED BIT(2)
+#define USBSW_OTG_SWITCH_ENABLED BIT(1)
+#define BOOST_ENABLED BIT(0)
+
+/* PKEY_TURNOFF_CR
+ * Address : 0x16
+ */
+#define PONKEY_PWR_OFF BIT(7)
+#define PONKEY_CC_FLAG_CLEAR BIT(6)
+#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0)
+#define PONKEY_TURNOFF_MASK GENMASK(7, 0)
+
+/*
+ * struct stpmic1 - stpmic1 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @irq: main IRQ number
+ * @regmap_irq_chip_data: irq chip data
+ */
+struct stpmic1 {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_STPMIC1_H */
--
1.9.1
\
 
 \ /
  Last update: 2018-11-30 10:58    [W:0.205 / U:32.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site