lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/3] mach-omap2: handle autoidle denial
From
Date
On 30/11/2018 09:57, Stephen Boyd wrote:
> Quoting Tero Kristo (2018-11-29 23:37:35)
>> On 30/11/2018 02:26, Stephen Boyd wrote:
>>> Quoting Andreas Kemnade (2018-11-10 12:31:12)
>>>> On the gta04 with a dm3730 omap_hdq does not work properly when the
>>>> device enters lower power states. Idling uart1 and 2 is enough
>>>> to show up that problem, if there are no other things enabled.
>>>> Further research reveals that hdq iclk must not be turned off during
>>>> transfers, also according to the TRM. That fact is also correctly described
>>>> in the flags but the code to handle that is incomplete.
>>>>
>>>> To handle multiple users of a single ick, autoidle is disabled
>>>> when a user of that ick requires that (has the OCPIF_SWSUP_IDLE))
>>>>
>>>> Changes since v1:
>>>> - uses spinlocks instead of mutexes
>>>> - invert counter logic
>>>> - check whether clock type is basic
>>>>
>>>
>>> I'm expecting someone like Tero or Tony to review this.
>>>
>>
>> Rest of it looks fine to me, except for the discussion under the
>> CLK_IS_BASIC flag, which might trigger a bigger rework of the code.
>>
>
> Is that a Reviewed-by tag?
>

Not yet, lets see where discussion ends up with patch #2. :)

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-30 10:23    [W:0.067 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site