lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/3] mach-omap2: handle autoidle denial
From
Date
On 30/11/2018 02:26, Stephen Boyd wrote:
> Quoting Andreas Kemnade (2018-11-10 12:31:12)
>> On the gta04 with a dm3730 omap_hdq does not work properly when the
>> device enters lower power states. Idling uart1 and 2 is enough
>> to show up that problem, if there are no other things enabled.
>> Further research reveals that hdq iclk must not be turned off during
>> transfers, also according to the TRM. That fact is also correctly described
>> in the flags but the code to handle that is incomplete.
>>
>> To handle multiple users of a single ick, autoidle is disabled
>> when a user of that ick requires that (has the OCPIF_SWSUP_IDLE))
>>
>> Changes since v1:
>> - uses spinlocks instead of mutexes
>> - invert counter logic
>> - check whether clock type is basic
>>
>
> I'm expecting someone like Tero or Tony to review this.
>

Rest of it looks fine to me, except for the discussion under the
CLK_IS_BASIC flag, which might trigger a bigger rework of the code.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-30 08:38    [W:0.133 / U:4.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site