lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 4/4] doc: lpspi: Document DT bindings for LPSPI slave mode
Date
Remove "fsl,imx8qxp-spi", it does not exist in spi-fsl-lpspi.c driver
for now.

Add introductions of interrupt-parent and spi-slave.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 8d178a4503cf..9e44d85e0a68 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -3,10 +3,12 @@
Required properties:
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
- - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc
- reg : address and length of the lpspi master registers
+- interrupt-parent : core interrupt controller
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
+- spi-slave : spi slave mode support. In slave mode, add this attribute without
+ value. In master mode, remove it.

Examples:

@@ -16,4 +18,5 @@ lpspi2: lpspi@40290000 {
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7ULP_CLK_LPSPI2>;
+ spi-slave;
};
--
2.17.1
\
 
 \ /
  Last update: 2018-11-30 05:30    [W:0.066 / U:3.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site