lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/3] thermal: tegra: parse sensor id before sensor register
From
Date


On 30/11/2018 12:46 AM, Eduardo Valentin wrote:
> On Thu, Nov 29, 2018 at 06:09:43PM +0800, Wei Ni wrote:
>> Since different platforms may not support all 4
>> sensors, so the sensor registration may be failed.
>> Add codes to parse dt to find sensor id which
>> need to be registered. So that the registration
>> can be successful on all platform.
>>
>> Signed-off-by: Wei Ni <wni@nvidia.com>
>> ---
>> drivers/thermal/tegra/soctherm.c | 46 ++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 44 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
>> index 375cadbc24cd..bdc660f2794a 100644
>> --- a/drivers/thermal/tegra/soctherm.c
>> +++ b/drivers/thermal/tegra/soctherm.c
>> @@ -1224,6 +1224,42 @@ static void soctherm_init(struct platform_device *pdev)
>> tegra_soctherm_throttle(&pdev->dev);
>> }
>>
>> +static bool tegra_soctherm_find_sensor_id(unsigned int sensor_id)
>> +{
>> + bool ret = false;
>> + struct of_phandle_args sensor_specs;
>> + struct device_node *np, *sensor_np;
>> +
>> + np = of_find_node_by_name(NULL, "thermal-zones");
>> + if (!np)
>> + return ret;
>> +
>> + sensor_np = of_get_next_child(np, NULL);
>> + for_each_available_child_of_node(np, sensor_np) {
>> + if (of_parse_phandle_with_args(sensor_np, "thermal-sensors",
>> + "#thermal-sensor-cells",
>> + 0, &sensor_specs))
>> + continue;
>> +
>> + if (sensor_specs.args_count != 1) {
>> + WARN(sensor_specs.args_count != 1,
>> + "%s: wrong cells in sensor specifier %d\n",
>> + sensor_specs.np->name, sensor_specs.args_count);
>> + continue;
>> + }
>> +
>> + if (sensor_specs.args[0] == sensor_id) {
>> + ret = true;
>> + break;
>> + }
>> + }
>> +
>> + of_node_put(np);
>> + of_node_put(sensor_np);
>> +
>> + return ret;
>> +}
>> +
>> static const struct of_device_id tegra_soctherm_of_match[] = {
>> #ifdef CONFIG_ARCH_TEGRA_124_SOC
>> {
>> @@ -1365,13 +1401,16 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>> zone->sg = soc->ttgs[i];
>> zone->ts = tegra;
>>
>> + if (!tegra_soctherm_find_sensor_id(soc->ttgs[i]->id))
>> + continue;
>> +
>
>
> Instead of matching driver id with DT id presence, wouldnt make sense to
> simply have DT with the sensors that makes sense for that platform?
>
> I am failing to understand why you need to go over and find ids.

As discussed with Daniel several days ago, this driver will always try
to register 4 thermal zones, including cpu, gpu, mem and pll, but some
platform doesn't need to support all of them, so the thermal zone
registration will be failed. In previous patches, we just ignore the
failure and continue to register next sensors, but Daniel think it's not
good. And per his suggestion, we refer to the qoriq thermal driver to
parse dt to get sensor_id, so that we can make the registration to be
successful.

Wei.

>
>> z = devm_thermal_zone_of_sensor_register(&pdev->dev,
>> soc->ttgs[i]->id, zone,
>> &tegra_of_thermal_ops);
>> if (IS_ERR(z)) {
>> err = PTR_ERR(z);
>> - dev_err(&pdev->dev, "failed to register sensor: %d\n",
>> - err);
>> + dev_err(&pdev->dev, "failed to register sensor %s: %d\n",
>> + soc->ttgs[i]->name, err);
>> goto disable_clocks;
>> }
>>
>> @@ -1434,6 +1473,9 @@ static int __maybe_unused soctherm_resume(struct device *dev)
>> struct thermal_zone_device *tz;
>>
>> tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
>> + if (!tz)
>> + continue;
>> +
>> err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
>> if (err) {
>> dev_err(&pdev->dev,
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2018-11-30 04:01    [W:0.060 / U:8.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site