lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: am335x-pdu001: Fix polarity of card detection input
Date
When a micro SD card is inserted in the PDU001 card cage, the card
detection switch is opened and the corresponding GPIO input is driven
by a pull-up. Hence change the active level of the card detection
input from low to high.

Signed-off-by: Felix Brack <fb@ltec.ch>
---
arch/arm/boot/dts/am335x-pdu001.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 6dd9d487aaeb..ae43d61f4e8b 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -585,7 +585,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};

&sham {
--
2.17.1
\
 
 \ /
  Last update: 2018-11-30 16:31    [W:0.030 / U:4.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site