lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC PATCH v2 10/15] usb:cdns3: Ep0 operations part of the API
From
Date


On 18/11/18 12:09, Pawel Laszczak wrote:
> Patch implements related to default endpoint callback functions
> defined in usb_ep_ops object
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> drivers/usb/cdns3/ep0.c | 191 ++++++++++++++++++++++++++++++++++++-
> drivers/usb/cdns3/gadget.c | 8 ++
> drivers/usb/cdns3/gadget.h | 10 ++
> 3 files changed, 207 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
> index ca1795467155..d05169e73631 100644
> --- a/drivers/usb/cdns3/ep0.c
> +++ b/drivers/usb/cdns3/ep0.c
> @@ -18,11 +18,185 @@ static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
> .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
> };
>
> +/**
> + * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
> + * @priv_dev: extended gadget object
> + * @dma_addr: physical address where data is/will be stored
> + * @length: data length
> + * @erdy: set it to 1 when ERDY packet should be sent -
> + * exit from flow control state
> + */
> +static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
> + dma_addr_t dma_addr,
> + unsigned int length, int erdy)
> +{
> + struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
> +
> + priv_dev->trb_ep0->buffer = TRB_BUFFER(dma_addr);
> + priv_dev->trb_ep0->length = TRB_LEN(length);
> + priv_dev->trb_ep0->control = TRB_CYCLE | TRB_IOC | TRB_TYPE(TRB_NORMAL);
> +
> + cdns3_select_ep(priv_dev,
> + priv_dev->ep0_data_dir ? USB_DIR_IN : USB_DIR_OUT);
> +
> + writel(EP_STS_TRBERR, &regs->ep_sts);
> + writel(EP_TRADDR_TRADDR(priv_dev->trb_ep0_dma), &regs->ep_traddr);
> +
> + dev_dbg(&priv_dev->dev, "//Ding Dong ep0%s\n",
> + priv_dev->ep0_data_dir ? "IN" : "OUT");
> +
> + /* TRB should be prepared before starting transfer */
> + writel(EP_CMD_DRDY, &regs->ep_cmd);
> +
> + if (erdy)
> + writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
> +}
> +
> static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
> {
> //TODO: Implements this function
> }
>
> +static void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)

Is this going to be used only for ep0?
If yes then let's have ep0 in the name.
If not then this function should be in gadget.c

> +{
> + struct cdns3_endpoint *priv_ep;
> + struct usb_request *request;
> + struct usb_ep *ep;
> + int result = 0;
> +
> + if (priv_dev->hw_configured_flag)
> + return;
> +
> + writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
> + writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd);
> +
> + cdns3_set_register_bit(&priv_dev->regs->usb_conf,
> + USB_CONF_U1EN | USB_CONF_U2EN);

Shouldn't U1/U2 be enabled only if the USB_DEVICE_U1_ENABLE/USB_DEVICE_U2_ENABLE
device request was received?

> +
> + /* wait until configuration set */
> + result = cdns3_handshake(&priv_dev->regs->usb_sts,
> + USB_STS_CFGSTS_MASK, 1, 100);
> +
> + priv_dev->hw_configured_flag = 1;
> + cdns3_enable_l1(priv_dev, 1);
> +
> + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
> + if (ep->enabled) {
> + priv_ep = ep_to_cdns3_ep(ep);
> + request = cdns3_next_request(&priv_ep->request_list);
> + if (request)
> + cdns3_ep_run_transfer(priv_ep, request);

why are you starting transfers in a function that is supposed to set hw configuration only.

> + }
> + }
> +}
> +
> +/**
> + * cdns3_gadget_ep0_enable
> + * Function shouldn't be called by gadget driver,
> + * endpoint 0 is allways active
> + */
> +static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
> + const struct usb_endpoint_descriptor *desc)
> +{
> + return -EINVAL;
> +}
> +
> +/**
> + * cdns3_gadget_ep0_disable
> + * Function shouldn't be called by gadget driver,
> + * endpoint 0 is allways active
> + */
> +static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
> +{
> + return -EINVAL;
> +}
> +
> +/**
> + * cdns3_gadget_ep0_set_halt
> + * @ep: pointer to endpoint zero object
> + * @value: 1 for set stall, 0 for clear stall
> + *
> + * Returns 0
> + */
> +static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
> +{
> + /* TODO */
> + return 0;
> +}
> +
> +/**
> + * cdns3_gadget_ep0_queue Transfer data on endpoint zero
> + * @ep: pointer to endpoint zero object
> + * @request: pointer to request object
> + * @gfp_flags: gfp flags
> + *
> + * Returns 0 on success, error code elsewhere
> + */
> +static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
> + struct usb_request *request,
> + gfp_t gfp_flags)
> +{
> + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
> + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
> + unsigned long flags;
> + int erdy_sent = 0;
> + int ret = 0;
> +
> + dev_dbg(&priv_dev->dev, "Queue to Ep0%s L: %d\n",
> + priv_dev->ep0_data_dir ? "IN" : "OUT",
> + request->length);
> +
> + /* send STATUS stage */
> + if (request->length == 0 && request->zero == 0) {

Is this check sufficient to know STATUS stage?
It might be normal for vendor specific control request to have
request->length = 0 and request->zero = 0.


> + spin_lock_irqsave(&priv_dev->lock, flags);
> + cdns3_select_ep(priv_dev, 0x00);
> +
> + erdy_sent = !priv_dev->hw_configured_flag;
> + cdns3_set_hw_configuration(priv_dev);

What if we're still busy with DATA stage of previous ep0_queue?

if (!list_empty(&priv_ep->request_list)) should be done as the first thing in this function.

> +
> + if (!erdy_sent)
> + writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL,
> + &priv_dev->regs->ep_cmd);
> +
> + cdns3_prepare_setup_packet(priv_dev);
> + request->actual = 0;
> + priv_dev->status_completion_no_call = true;
> + priv_dev->pending_status_request = request;
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> +
> + /*
> + * Since there is no completion interrupt for status stage,
> + * it needs to call ->completion in software after
> + * ep0_queue is back.
> + */
> + queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
> + return 0;
> + }
> +
> + spin_lock_irqsave(&priv_dev->lock, flags);
> + if (!list_empty(&priv_ep->request_list)) {
> + dev_err(&priv_dev->dev,
> + "can't handle multiple requests for ep0\n");
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> + return -EOPNOTSUPP;

-EBUSY?

> + }
> +
> + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
> + priv_dev->ep0_data_dir);
> + if (ret) {
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> + dev_err(&priv_dev->dev, "failed to map request\n");
> + return -EINVAL;
> + }
> +
> + priv_dev->ep0_request = request;
> + list_add_tail(&request->list, &priv_ep->request_list);
> + cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1);
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> +
> + return ret;
> +}
> +
> /**
> * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint
> * @ep: endpoint object
> @@ -41,6 +215,17 @@ int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
> return 0;
> }
>
> +const struct usb_ep_ops cdns3_gadget_ep0_ops = {
> + .enable = cdns3_gadget_ep0_enable,
> + .disable = cdns3_gadget_ep0_disable,
> + .alloc_request = cdns3_gadget_ep_alloc_request,
> + .free_request = cdns3_gadget_ep_free_request,
> + .queue = cdns3_gadget_ep0_queue,
> + .dequeue = cdns3_gadget_ep_dequeue,
> + .set_halt = cdns3_gadget_ep0_set_halt,
> + .set_wedge = cdns3_gadget_ep_set_wedge,
> +};
> +
> /**
> * cdns3_ep0_config - Configures default endpoint
> * @priv_dev: extended gadget object
> @@ -62,6 +247,9 @@ void cdns3_ep0_config(struct cdns3_device *priv_dev)
> priv_dev->ep0_request = NULL;
> }
>
> + priv_dev->u1_allowed = 0;
> + priv_dev->u2_allowed = 0;
> +

where do you set these?

> priv_dev->gadget.ep0->maxpacket = max_packet_size;
> cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
>
> @@ -106,8 +294,7 @@ int cdns3_init_ep0(struct cdns3_device *priv_dev)
> sprintf(ep0->name, "ep0");
>
> /* fill linux fields */
> - //TODO: implements cdns3_gadget_ep0_ops object
> - //ep0->endpoint.ops = &cdns3_gadget_ep0_ops;
> + ep0->endpoint.ops = &cdns3_gadget_ep0_ops;
> ep0->endpoint.maxburst = 1;
> usb_ep_set_maxpacket_limit(&ep0->endpoint, ENDPOINT0_MAX_PACKET_LIMIT);
> ep0->endpoint.address = 0;
> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
> index 1f2a434486dc..c965da16c0c8 100644
> --- a/drivers/usb/cdns3/gadget.c
> +++ b/drivers/usb/cdns3/gadget.c
> @@ -188,6 +188,14 @@ static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
> priv_ep->flags |= EP_STALL;
> }
>

> +void cdns3_enable_l1(struct cdns3_device *priv_dev, int enable)

Some comment might help as to what L1 is.

> +{
> + if (enable)
> + writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
> + else
> + writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
> +}
> +
> /**
> * cdns3_gadget_giveback - call struct usb_request's ->complete callback
> * @priv_ep: The endpoint to whom the request belongs to
> diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
> index a4be288b34cb..224f6b830bc9 100644
> --- a/drivers/usb/cdns3/gadget.h
> +++ b/drivers/usb/cdns3/gadget.h
> @@ -1068,11 +1068,21 @@ struct cdns3_device {
> struct usb_request *pending_status_request;
> };
>
> +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
> void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
> int cdns3_init_ep0(struct cdns3_device *priv_dev);
> void cdns3_ep0_config(struct cdns3_device *priv_dev);
> void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
> +void cdns3_enable_l1(struct cdns3_device *priv_dev, int enable);
> +struct usb_request *cdns3_next_request(struct list_head *list);
> +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
> + struct usb_request *request);
> int cdns3_gadget_ep_set_wedge(struct usb_ep *ep);
> int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value);
> +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
> + gfp_t gfp_flags);
> +void cdns3_gadget_ep_free_request(struct usb_ep *ep,
> + struct usb_request *request);
> +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
>
> #endif /* __LINUX_CDNS3_GADGET */
>

cheers,
-roger

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-28 15:32    [W:0.204 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site