lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 12/15] dt-bindings: serial: Document RDA Micro UART
Date
From: Andreas Färber <afaerber@suse.de>

Add an initial binding for the UART in RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../bindings/serial/rda,8810pl-uart.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
new file mode 100644
index 000000000000..ee03116d7415
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
@@ -0,0 +1,15 @@
+RDA Micro UART
+
+Required properties:
+- compatible : "rda,8810pl-uart" for RDA8810PL SoCs.
+- reg : Offset and length of the register set for the device.
+- interrupts : Should contain UART interrupt.
+
+
+Example:
+
+ uart2: serial@20a90000 {
+ compatible = "rda,8810pl-uart";
+ reg = <0x20a90000 0x1000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.17.1
\
 
 \ /
  Last update: 2018-11-28 14:53    [W:0.140 / U:2.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site