lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v2 08/15] usb:cdns3: Implements device operations part of the API
From
Date


On 18/11/18 12:09, Pawel Laszczak wrote:
> Patch adds implementation callback function defined in
> usb_gadget_ops object.
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> drivers/usb/cdns3/gadget.c | 249 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 247 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
> index 376b68b13d1b..702a05faa664 100644
> --- a/drivers/usb/cdns3/gadget.c
> +++ b/drivers/usb/cdns3/gadget.c
> @@ -17,6 +17,36 @@
> #include "gadget-export.h"
> #include "gadget.h"
>
> +/**
> + * cdns3_handshake - spin reading until handshake completes or fails
> + * @ptr: address of device controller register to be read
> + * @mask: bits to look at in result of read
> + * @done: value of those bits when handshake succeeds
> + * @usec: timeout in microseconds
> + *
> + * Returns negative errno, or zero on success
> + *
> + * Success happens when the "mask" bits have the specified value (hardware
> + * handshake done). There are two failure modes: "usec" have passed (major
> + * hardware flakeout), or the register reads as all-ones (hardware removed).
> + */
> +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
> +{
> + u32 result;
> +
> + do {
> + result = readl(ptr);
> + if (result == ~(u32)0) /* card removed */
> + return -ENODEV;

Is this applicable to all registers?
What is meant by card removed? We're not connected to host?

how does EP reset behave when there is no USB connection?

> + result &= mask;
> + if (result == done)
> + return 0;
> + udelay(1);
> + usec--;
> + } while (usec > 0);
> + return -ETIMEDOUT;
> +}
> +
> /**
> * cdns3_set_register_bit - set bit in given register.
> * @ptr: address of device controller register to be read and changed
> @@ -43,6 +73,25 @@ void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
> writel(ep, &priv_dev->regs->ep_sel);
> }
>
> +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
> +{
> + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
> +
> + if (priv_ep->trb_pool) {
> + dma_free_coherent(priv_dev->sysdev,
> + TRB_RIGN_SIZE,
> + priv_ep->trb_pool, priv_ep->trb_pool_dma);
> + priv_ep->trb_pool = NULL;
> + }
> +
> + if (priv_ep->aligned_buff) {
> + dma_free_coherent(priv_dev->sysdev, CDNS3_UNALIGNED_BUF_SIZE,
> + priv_ep->aligned_buff,
> + priv_ep->aligned_dma_addr);
> + priv_ep->aligned_buff = NULL;
> + }
> +}
> +
> /**
> * cdns3_irq_handler - irq line interrupt handler
> * @cdns: cdns3 instance
> @@ -58,6 +107,114 @@ static irqreturn_t cdns3_irq_handler_thread(struct cdns3 *cdns)
> return ret;
> }
>
> +/* Find correct direction for HW endpoint according to description */
> +static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
> + struct cdns3_endpoint *priv_ep)
> +{
> + return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
> + (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
> +}
> +
> +static struct cdns3_endpoint *cdns3_find_available_ss_ep(struct cdns3_device *priv_dev,
> + struct usb_endpoint_descriptor *desc)

why is this function called ss_ep? This doesn't seem like only for superspeed endpoints.

> +{
> + struct usb_ep *ep;
> + struct cdns3_endpoint *priv_ep;
> +
> + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
> + unsigned long num;
> + int ret;
> + /* ep name pattern likes epXin or epXout */
> + char c[2] = {ep->name[2], '\0'};
> +
> + ret = kstrtoul(c, 10, &num);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + priv_ep = ep_to_cdns3_ep(ep);
> + if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
> + if (!(priv_ep->flags & EP_USED)) {
> + priv_ep->num = num;
> + priv_ep->flags |= EP_USED;
> + return priv_ep;
> + }
> + }
> + }
> + return ERR_PTR(-ENOENT);
> +}
> +
> +static struct usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
> + struct usb_endpoint_descriptor *desc,
> + struct usb_ss_ep_comp_descriptor *comp_desc)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> + struct cdns3_endpoint *priv_ep;
> + unsigned long flags;
> +
> + priv_ep = cdns3_find_available_ss_ep(priv_dev, desc);
> + if (IS_ERR(priv_ep)) {
> + dev_err(&priv_dev->dev, "no available ep\n");
> + return NULL;
> + }
> +
> + dev_dbg(&priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
> +
> + spin_lock_irqsave(&priv_dev->lock, flags);
> + priv_ep->endpoint.desc = desc;
> + priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
> + priv_ep->type = usb_endpoint_type(desc);
> +
> + list_add_tail(&priv_ep->ep_match_pending_list,
> + &priv_dev->ep_match_list);
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> + return &priv_ep->endpoint;
> +}

Why do you need a custom match_ep?
doesn't usb_ep_autoconfig suffice?

You can check if EP is claimed or not by checking the ep->claimed flag.

> +
> +/**
> + * cdns3_gadget_get_frame Returns number of actual ITP frame
> + * @gadget: gadget object
> + *
> + * Returns number of actual ITP frame
> + */
> +static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> +
> + return readl(&priv_dev->regs->usb_iptn);
> +}
> +
> +static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
> +{
> + return 0;
> +}
> +
> +static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
> + int is_selfpowered)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&priv_dev->lock, flags);
> + gadget->is_selfpowered = !!is_selfpowered;
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> + return 0;
> +}
> +
> +static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> +
> + if (!priv_dev->start_gadget)
> + return 0;
> +
> + if (is_on)
> + writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
> + else
> + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
> +
> + return 0;
> +}
> +
> static void cdns3_gadget_config(struct cdns3_device *priv_dev)
> {
> struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
> @@ -74,6 +231,95 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev)
> writel(USB_CONF_DEVEN, &regs->usb_conf);
> }
>
> +/**
> + * cdns3_gadget_udc_start Gadget start
> + * @gadget: gadget object
> + * @driver: driver which operates on this gadget
> + *
> + * Returns 0 on success, error code elsewhere
> + */
> +static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
> + struct usb_gadget_driver *driver)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> + unsigned long flags;
> +
> + if (priv_dev->gadget_driver) {
> + dev_err(&priv_dev->dev, "%s is already bound to %s\n",
> + priv_dev->gadget.name,
> + priv_dev->gadget_driver->driver.name);
> + return -EBUSY;
> + }

Not sure if this check is required. UDC core should be doing that.

> +
> + spin_lock_irqsave(&priv_dev->lock, flags);
> + priv_dev->gadget_driver = driver;
> + if (!priv_dev->start_gadget)
> + goto unlock;
> +
> + cdns3_gadget_config(priv_dev);
> +unlock:
> + spin_unlock_irqrestore(&priv_dev->lock, flags);
> + return 0;
> +}
> +
> +/**
> + * cdns3_gadget_udc_stop Stops gadget
> + * @gadget: gadget object
> + *
> + * Returns 0
> + */
> +static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
> +{
> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
> + struct cdns3_endpoint *priv_ep, *temp_ep;
> + u32 bEndpointAddress;
> + struct usb_ep *ep;
> + int ret = 0;
> + int i;
> +
> + priv_dev->gadget_driver = NULL;
> + list_for_each_entry_safe(priv_ep, temp_ep, &priv_dev->ep_match_list,
> + ep_match_pending_list) {
> + list_del(&priv_ep->ep_match_pending_list);
> + priv_ep->flags &= ~EP_USED;
> + }
> +
> + priv_dev->onchip_mem_allocated_size = 0;
> + priv_dev->out_mem_is_allocated = 0;
> + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
> +
> + for (i = 0; i < priv_dev->ep_nums ; i++)
> + cdns3_free_trb_pool(priv_dev->eps[i]);
> +
> + if (!priv_dev->start_gadget)
> + return 0;

This looks tricky. Why do we need this flag?

> +
> + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
> + priv_ep = ep_to_cdns3_ep(ep);
> + bEndpointAddress = priv_ep->num | priv_ep->dir;
> + cdns3_select_ep(priv_dev, bEndpointAddress);
> + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
> + ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
> + EP_CMD_EPRST, 0, 100);
> + }
> +
> + /* disable interrupt for device */
> + writel(0, &priv_dev->regs->usb_ien);
> + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);

where are you requesting the interrupt? Looks like it should be done in
udc_start() no?

> +
> + return ret;
> +}

Can we combine cdns3_gadget_udc_start() and cdns3_gadget_udc_start()
with cdns3_gadget_start() and cdns3_gadget_stop() respectively so that
cdns3_gadget_config() and cleanup() is done at one place.

> +
> +static const struct usb_gadget_ops cdns3_gadget_ops = {
> + .get_frame = cdns3_gadget_get_frame,
> + .wakeup = cdns3_gadget_wakeup,
> + .set_selfpowered = cdns3_gadget_set_selfpowered,
> + .pullup = cdns3_gadget_pullup,
> + .udc_start = cdns3_gadget_udc_start,
> + .udc_stop = cdns3_gadget_udc_stop,
> + .match_ep = cdns3_gadget_match_ep,
> +};
> +
> /**
> * cdns3_init_ep Initializes software endpoints of gadget
> * @cdns3: extended gadget object
> @@ -184,8 +430,7 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
> /* fill gadget fields */
> priv_dev->gadget.max_speed = USB_SPEED_SUPER;
> priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
> - //TODO: Add implementation of cdns3_gadget_ops
> - //priv_dev->gadget.ops = &cdns3_gadget_ops;
> + priv_dev->gadget.ops = &cdns3_gadget_ops;
> priv_dev->gadget.name = "usb-ss-gadget";
> priv_dev->gadget.sg_supported = 1;
> priv_dev->is_connected = 0;
>

cheers,
-roger

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-28 13:23    [W:0.303 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site