lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
Date
Hi,

> -----Original Message-----
> From: Alex Williamson <alex.williamson@redhat.com>
> Sent: Tuesday, November 27, 2018 9:39 PM
> To: Bjorn Helgaas <helgaas@kernel.org>
> Cc: Bharat Bhushan <bharat.bhushan@nxp.com>; linux-pci@vger.kernel.org;
> linux-kernel@vger.kernel.org; bharatb.yadav@gmail.com; David Daney
> <david.daney@cavium.com>; Jan Glauber <jglauber@cavium.com>; Maik
> Broemme <mbroemme@libmpq.org>; Chris Blake
> <chrisrblake93@gmail.com>
> Subject: Re: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
>
> On Tue, 27 Nov 2018 09:33:56 -0600
> Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> > [+cc David, Jan, Alex, Maik, Chris]
> >
> > On Tue, Nov 27, 2018 at 08:46:33AM +0000, Bharat Bhushan wrote:
> > > NXP (Freescale Vendor ID) LS1088 chips do not behave correctly after
> > > bus reset with e1000e. Link state of device does not comes UP and so
> > > config space never accessible again.
> >
> > Previous similar commits:
> >
> > 822155100e58 ("PCI: Mark Cavium CN8xxx to avoid bus reset")
> > 8e2e03179923 ("PCI: Mark Atheros AR9580 to avoid bus reset")
> > 9ac0108c2bac ("PCI: Mark Atheros AR9485 and QCA9882 to avoid bus
> reset")
> > c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
> >
> > 1) Please make your subject match (remove the spurious "bus" at the
> > end)

Will correct, added by mistake

> >
> > 2) This should probably be marked for stable (v3.14 and later, since
> > the quirk itself appeared in v3.19 and marked for v3.14 and later
> > stable kernels). Maybe even mark it as "Fixes: c3e59ee4e766..." to
> > connect it.

Ok,

> >
> > 3) The 1957:80c0 PCI ID doesn't appear in
> >
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpci
> -
> ids.ucw.cz%2F&amp;data=02%7C01%7Cbharat.bhushan%40nxp.com%7C296
> 02a2efa584249221808d65482945b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C636789317139032063&amp;sdata=3jkRMa1NljSCp%2BvZP0kgz7D
> PWPJZH8d7JXhCE5vCCMk%3D&amp;reserved=0; can you add it?
> >

Yes, I will add

> > 4) Is there a hardware erratum for this? If so, please include the
> > URL here.

No h/w errata as of now.

> >
> > 5) Can you reproduce the problem using the same endpoint (e1000e) on a
> > different system with a different bridge?

I have multiple LS1088 boards and I can observe problem with all LS1088 boards.
While when I uses same PCI device on other NXP board (LS2088) then it works fine.

> >
> > 6) Have you looked at this with a PCIe analyzer? It would be very
> > interesting to compare the boot-time or system reboot path with the
> > individual bus reset path you're fixing.

I have not used PCIe analyzer,

> >
> > Since there are several similar reports and they sometimes involve the
> > same devices (both your patch and 822155100e58 mention e1000e), I'm a
> > little suspicious that we're doing something wrong in the bus reset
> > path.
>
> I agree, entirely excluding bus resets is not something to be taken lightly. It's
> less than ideal for an endpoint and a fairly major functional gap for a
> downstream port. It should really be considered a last resort.
>
> > I think bus reset uses Secondary Bus Reset in the Bridge Control
> > register. That's a generic mechanism that I would expect to be pretty
> > well-tested. I suspect the BIOS probably uses it in the reboot path,
> > and the device probably works after that.
> >
> > So I wonder if the Linux delay isn't quite long enough, or our first
> > access to the device isn't quite right, e.g., maybe there's some issue
> > with the bus/device number capture (PCIe r4.0, sec 2.2.6.2).
>
> Tweaking the delay would be a reasonable solution, though we are seeing
> some issues where users with lots of assigned devices that require bus
> resets experience long delays as vfio file descriptors are closed sequentially
> on exit.

In pci_reset_secondary_bus() I have tried to increase the delay after reset but not helped.
Do I need to add delay at some other place as well?

Thanks
-Bharat

> So perhaps we could flag downstream ports requiring an extra delay,
> if that becomes a solution. Your mention of the bus/device number also
> reminds me of the issue we saw on Threadripper where there were patches
> proposed to re-write the secondary and subordinate bus numbers after
> reset. AMD was able to resolve that in a firmware update, but there could
> be something similar occurring here. Thanks,
>
> Alex
>
> > > Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
> > > ---
> > > drivers/pci/quirks.c | 7 +++++++
> > > 1 file changed, 7 insertions(+)
> > >
> > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index
> > > 4700d24e5d55..b9ae4e9f101a 100644
> > > --- a/drivers/pci/quirks.c
> > > +++ b/drivers/pci/quirks.c
> > > @@ -3391,6 +3391,13 @@
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033,
> quirk_no_bus_reset);
> > > */
> > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100,
> > > quirk_no_bus_reset);
> > >
> > > +/*
> > > + * NXP (Freescale Vendor ID) LS1088 chips do not behave correctly
> > > +after
> > > + * bus reset. Link state of device does not comes UP and so config
> > > +space
> > > + * never accessible again.
> > > + */
> > > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, 0x80c0,
> > > +quirk_no_bus_reset);
> > > +
> > > static void quirk_no_pm_reset(struct pci_dev *dev) {
> > > /*
> > > --
> > > 2.19.1
> > >

\
 
 \ /
  Last update: 2018-11-28 05:32    [W:0.100 / U:3.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site