lkml.org 
[lkml]   [2018]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
Date
NXP (Freescale Vendor ID) LS1088 chips do not behave correctly after
bus reset with e1000e. Link state of device does not comes UP and so
config space never accessible again.

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
---
drivers/pci/quirks.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4700d24e5d55..b9ae4e9f101a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3391,6 +3391,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);

+/*
+ * NXP (Freescale Vendor ID) LS1088 chips do not behave correctly after
+ * bus reset. Link state of device does not comes UP and so config space
+ * never accessible again.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, 0x80c0, quirk_no_bus_reset);
+
static void quirk_no_pm_reset(struct pci_dev *dev)
{
/*
--
2.19.1
\
 
 \ /
  Last update: 2018-11-27 09:46    [W:0.099 / U:24.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site