lkml.org 
[lkml]   [2018]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5 3/8] clk: lochnagar: Add initial binding documentation
On Tue, Nov 20, 2018 at 02:16:26PM +0000, Charles Keepax wrote:
> Lochnagar is an evaluation and development board for Cirrus
> Logic Smart CODEC and Amp devices. It allows the connection of
> most Cirrus Logic devices on mini-cards, as well as allowing
> connection of various application processor systems to provide a
> full evaluation platform. This driver supports the board
> controller chip on the Lochnagar board.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
> .../devicetree/bindings/clock/cirrus,lochnagar.txt | 89 ++++++++++++++++++++++
> 1 file changed, 89 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> new file mode 100644
> index 000000000000..c1b5478d5432
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> @@ -0,0 +1,89 @@
> +Cirrus Logic Lochnagar Audio Development Board
> +
> +Lochnagar is an evaluation and development board for Cirrus Logic
> +Smart CODEC and Amp devices. It allows the connection of most Cirrus
> +Logic devices on mini-cards, as well as allowing connection of
> +various application processor systems to provide a full evaluation
> +platform. Audio system topology, clocking and power can all be
> +controlled through the Lochnagar, allowing the device under test
> +to be used in a variety of possible use cases.
> +
> +This binding document describes the binding for the clock portion of
> +the driver.
> +
> +Also see these documents for generic binding information:
> + [1] Clock : ../clock/clock-bindings.txt
> +
> +And these for relevant defines:
> + [2] include/dt-bindings/clock/lochnagar.h
> +
> +This binding must be part of the Lochnagar MFD binding:
> + [3] ../mfd/cirrus,lochnagar.txt
> +
> +Required properties:
> +
> + - compatible : One of the following strings:
> + "cirrus,lochnagar1-clk"
> + "cirrus,lochnagar2-clk"
What's the 1 vs. 2?

> +
> + - #clock-cells : Must be 1. The first cell indicates the clock
> + number, see [2] for available clocks and [1].
> +
> +Optional properties:
> +
> + - clocks : Must contain an entry for each clock in clock-names.
> + - clock-names : May contain entries for each of the following
> + clocks:
> + - ln-cdc-clkout : Output clock from CODEC card.
> + - ln-dsp-clkout : Output clock from DSP card.
> + - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
> + input audio clocks from host system.
> + - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
> + external connector.
> + - ln-spdif-clkout : Optional input audio clock from SPDIF.
> + - ln-adat-clkout : Optional input audio clock from ADAT.
> + - ln-pmic-32k : On board fixed regulator.

regulator?

> + - ln-clk-12m : On board fixed regulator.
> + - ln-clk-11m : On board fixed regulator.
> + - ln-clk-24m : On board fixed regulator.
> + - ln-clk-22m : On board fixed regulator.
> + - ln-usb-clk-24m : On board fixed regulator.
> + - ln-usb-clk-12m : On board fixed regulator.
> +
> + - assigned-clocks : A list of Lochnagar clocks to be reparented, see
> + [2] for available clocks.
> + - assigned-clock-parents : Parents to be assigned to the clocks
> + listed in "assigned-clocks".
> +
> +Optional sub-nodes:
> +
> + - fixed-clock nodes may be registered for the following on board clocks:
> + - ln-pmic-32k : 32768 kHz
> + - ln-clk-12m : 12288000 kHz
> + - ln-clk-11m : 11298600 kHz
> + - ln-clk-24m : 24576000 kHz
> + - ln-clk-22m : 22579200 kHz
> + - ln-usb-clk-24m : 24576000 kHz
> + - ln-usb-clk-12m : 12288000 kHz
> +
> +Example:
> +
> +lochnagar-clk {
> + compatible = "cirrus,lochnagar2-clk";
> +
> + #clock-cells = <1>;
> +
> + clocks = <&clk-audio>, <&clk_pmic>;
> + clock-names = "ln-gf-mclk2", "ln-pmic-32k";
> +
> + assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
> + <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
> + assigned-clock-parents = <&clk-audio>,
> + <&clk-pmic>;
> +
> + clk-pmic: clk-pmic {

This isn't really any relationship to the parent and I think shouldn't
be a sub-node.

> + compatible = "fixed-clock";
> + clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> +};
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2018-11-26 21:17    [W:0.175 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site