lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3 2/6] ARM: dtsi: add pwm node for sun8i R40.
This patch adds pwm node for sun8i R40.

Signed-off-by: Hao Zhang <hao5781286@gmail.com>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 6f4c9ca..cc05b2c 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -317,6 +317,7 @@
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
+
};

pio: pinctrl@1c20800 {
@@ -373,6 +374,11 @@
bias-pull-up;
};

+ pwm_ch0_pin: pwm-ch0-pin {
+ pins = "PB2";
+ function = "pwm";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
@@ -384,6 +390,17 @@
reg = <0x01c20c90 0x10>;
};

+ pwm: pwm@1c23400 {
+ compatible = "allwinner,sun8i-r40-pwm";
+ reg = <0x01c23400 0x400>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>, <&ccu CLK_APB1>;
+ clock-names = "mux-0", "mux-1";
+ pwm-channels = <8>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
--
2.7.4
\
 
 \ /
  Last update: 2018-11-25 17:20    [W:0.036 / U:2.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site