lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    SubjectRE: [RFC PATCH v2 04/15] usb:cdns3: Driver initialization code.
    Date
    Hi Roger

    >On 18/11/18 12:09, Pawel Laszczak wrote:
    >> Patch adds core.c and core.h file that implements initialization
    >> of platform driver and adds function responsible for selecting,
    >> switching and running appropriate Device/Host mode.
    >>
    >> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
    >> ---
    >> drivers/usb/cdns3/Makefile | 2 +
    >> drivers/usb/cdns3/core.c | 413 +++++++++++++++++++++++++++++++++++++
    >> drivers/usb/cdns3/core.h | 100 +++++++++
    >> 3 files changed, 515 insertions(+)
    >> create mode 100644 drivers/usb/cdns3/core.c
    >> create mode 100644 drivers/usb/cdns3/core.h
    >>
    >> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
    >> index dcdd62003c6a..02d25b23c5d3 100644
    >> --- a/drivers/usb/cdns3/Makefile
    >> +++ b/drivers/usb/cdns3/Makefile
    >> @@ -1,3 +1,5 @@
    >> +obj-$(CONFIG_USB_CDNS3) += cdns3.o
    >> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
    >>
    >> +cdns3-y := core.o
    >> cdns3-pci-y := cdns3-pci-wrap.o
    >> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
    >> new file mode 100644
    >> index 000000000000..f9055d4da67f
    >> --- /dev/null
    >> +++ b/drivers/usb/cdns3/core.c
    >> @@ -0,0 +1,413 @@
    >> +// SPDX-License-Identifier: GPL-2.0
    >> +/*
    >> + * Cadence USBSS DRD Driver.
    >> + *
    >> + * Copyright (C) 2018 Cadence.
    >> + *
    >> + * Author: Peter Chen <peter.chen@nxp.com>
    >> + * Pawel Laszczak <pawell@cadence.com>
    >> + */
    >> +
    >> +#include <linux/module.h>
    >> +#include <linux/kernel.h>
    >> +#include <linux/platform_device.h>
    >> +#include <linux/interrupt.h>
    >> +#include <linux/io.h>
    >> +#include <linux/pm_runtime.h>
    >> +
    >> +#include "gadget.h"
    >> +#include "core.h"
    >> +
    >> +static inline struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns)
    >> +{
    >> + WARN_ON(cdns->role >= CDNS3_ROLE_END || !cdns->roles[cdns->role]);
    >> + return cdns->roles[cdns->role];
    >> +}
    >> +
    >> +static inline int cdns3_role_start(struct cdns3 *cdns, enum cdns3_roles role)
    >> +{
    >> + int ret;
    >> +
    >> + if (role >= CDNS3_ROLE_END)
    >
    >WARN_ON()?
    I agree.
    >
    >> + return 0;
    >> +
    >> + if (!cdns->roles[role])
    >> + return -ENXIO;
    >> +
    >> + mutex_lock(&cdns->mutex);
    >> + cdns->role = role;
    >> + ret = cdns->roles[role]->start(cdns);
    >> + mutex_unlock(&cdns->mutex);
    >> + return ret;
    >> +}
    >> +
    >> +static inline void cdns3_role_stop(struct cdns3 *cdns)
    >> +{
    >> + enum cdns3_roles role = cdns->role;
    >> +
    >> + if (role == CDNS3_ROLE_END)
    >
    >WARN_ON(role >= CNDS3_ROLE_END) ?
    I agree
    >
    >> + return;
    >> +
    >> + mutex_lock(&cdns->mutex);
    >> + cdns->roles[role]->stop(cdns);
    >> + cdns->role = CDNS3_ROLE_END;
    >
    >Why change the role here? You are just stopping the role not changing it.
    >I think cdns->role should remain unchanged, so we can call cdns3_role_start()
    >if required without error.

    This line is unnecessary.

    >
    >> + mutex_unlock(&cdns->mutex);
    >> +}
    >> +
    >> +static enum cdns3_roles cdns3_get_role(struct cdns3 *cdns)
    >> +{
    >> + if (cdns->roles[CDNS3_ROLE_HOST] && cdns->roles[CDNS3_ROLE_GADGET]) {
    >> + //TODO: implements selecting device/host mode
    >> + return CDNS3_ROLE_HOST;
    >> + }
    >> + return cdns->roles[CDNS3_ROLE_HOST]
    >> + ? CDNS3_ROLE_HOST
    >> + : CDNS3_ROLE_GADGET;
    >
    >Why not just
    > return cdns->role;
    >
    >I'm wondering if we really need this function

    TODO will look likie:
    if (cdns3_is_host(cdns))
    return CDNS3_ROLE_HOST;
    if (cdns3_is_device(cdns))
    return CDNS3_ROLE_GADGET;

    Function selects initial role. Before invoking it the role is unknown.
    I think that function name should be changed because current name can be misleading.

    I will change it to cdns3_get_initial_role.
    .
    >> +}
    >
    >> +
    >> +/**
    >> + * cdns3_core_init_role - initialize role of operation
    >> + * @cdns: Pointer to cdns3 structure
    >> + *
    >> + * Returns 0 on success otherwise negative errno
    >> + */
    >> +static int cdns3_core_init_role(struct cdns3 *cdns)
    >> +{
    >> + struct device *dev = cdns->dev;
    >> + enum usb_dr_mode dr_mode;
    >> +
    >> + dr_mode = usb_get_dr_mode(dev);
    >> + cdns->role = CDNS3_ROLE_END;
    >> +
    >> + /*
    >> + * If driver can't read mode by means of usb_get_dr_mdoe function then
    >> + * chooses mode according with Kernel configuration. This setting
    >> + * can be restricted later depending on strap pin configuration.
    >> + */
    >> + if (dr_mode == USB_DR_MODE_UNKNOWN) {
    >> + if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
    >> + IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
    >> + dr_mode = USB_DR_MODE_OTG;
    >> + else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
    >> + dr_mode = USB_DR_MODE_HOST;
    >> + else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
    >> + dr_mode = USB_DR_MODE_PERIPHERAL;
    >> + }
    >> +
    >> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
    >> + //TODO: implements host initialization
    >
    > /* TODO: Add host role */ ?
    >
    >> + }
    >> +
    >> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
    >> + //TODO: implements device initialization
    >
    > /* TODO: Add device role */ ?
    >
    >> + }
    >> +
    >> + if (!cdns->roles[CDNS3_ROLE_HOST] && !cdns->roles[CDNS3_ROLE_GADGET]) {
    >> + dev_err(dev, "no supported roles\n");
    >> + return -ENODEV;
    >> + }
    >> +
    >> + cdns->dr_mode = dr_mode;
    >> + return 0;
    >> +}
    >> +
    >> +/**
    >> + * cdns3_irq - interrupt handler for cdns3 core device
    >> + *
    >> + * @irq: irq number for cdns3 core device
    >> + * @data: structure of cdns3
    >> + *
    >> + * Returns IRQ_HANDLED or IRQ_NONE
    >> + */
    >> +static irqreturn_t cdns3_irq(int irq, void *data)
    >> +{
    >> + struct cdns3 *cdns = data;
    >> + irqreturn_t ret = IRQ_NONE;
    >> +
    >> + /* Handle device/host interrupt */
    >> + if (cdns->role != CDNS3_ROLE_END)
    >
    >Is it because of this that you need to set role to END at role_stop?
    >I think it is better to add a state variable to struct cdns3_role_driver, so we can
    >check if it is active or stopped.
    >
    >e.g.
    > if (cdns3_get_current_role_driver(cdns)->state == CDNS3_ROLE_STATE_ACTIVE)

    Ok, I will do it in this way.
    >> + ret = cdns3_get_current_role_driver(cdns)->irq(cdns);
    >> +
    >> + return ret;
    >> +}
    >> +
    >> +static void cdns3_remove_roles(struct cdns3 *cdns)
    >
    >Should this be called cdns3_exit_roles() to be opposite of cdns3_init_roles()?

    Sounds better.
    I also change cdns3_host_remove to cdns3_host_exit and
    cdns3_gadget_remove to cdns3_gadget_exit.
    >
    >> +{
    >> + //TODO: implements this function
    >> +}
    >
    >> +
    >> +static int cdns3_do_role_switch(struct cdns3 *cdns, enum cdns3_roles role)
    >> +{
    >> + enum cdns3_roles current_role;
    >> + int ret = 0;
    >> +
    >> + current_role = cdns->role;
    >> +
    >> + if (role == CDNS3_ROLE_END)
    >> + return 0;
    >
    >role == END looks like error state. and it should never happen.
    >WARN here?

    Ok, will be changed.
    >
    >> +
    >> + dev_dbg(cdns->dev, "Switching role");
    >> +
    >
    >Don't you have to stop the previous role before starting the new role?
    >
    >> + ret = cdns3_role_start(cdns, role);
    >> + if (ret) {
    >> + /* Back to current role */
    >> + dev_err(cdns->dev, "set %d has failed, back to %d\n",
    >> + role, current_role);
    >> + ret = cdns3_role_start(cdns, current_role);
    >> + }
    >> +
    >> + return ret;
    >> +}
    >> +
    >> +/**
    >> + * cdns3_role_switch - work queue handler for role switch
    >> + *
    >> + * @work: work queue item structure
    >> + *
    >> + * Handles below events:
    >> + * - Role switch for dual-role devices
    >> + * - CDNS3_ROLE_GADGET <--> CDNS3_ROLE_END for peripheral-only devices
    >> + */
    >> +static void cdns3_role_switch(struct work_struct *work)
    >> +{
    >> + enum cdns3_roles role = CDNS3_ROLE_END;
    >> + struct cdns3 *cdns;
    >> + bool device, host;
    >> +
    >> + cdns = container_of(work, struct cdns3, role_switch_wq);
    >> +
    >> + //TODO: implements this functions.
    >> + //host = cdns3_is_host(cdns);
    >> + //device = cdns3_is_device(cdns);
    >> + host = 1;
    >> + device = 0;
    >> +
    >> + if (host)
    >> + role = CDNS3_ROLE_HOST;
    >> + else if (device)
    >> + role = CDNS3_ROLE_GADGET;
    >> +
    >> + if (cdns->desired_dr_mode == cdns->current_dr_mode &&
    >> + cdns->role == role)
    >> + return;
    >> +
    >
    >I think all the below code can be moved to cdns3_do_role_switch().

    Yes, I agree with you. cdns3_role_stop should be in cdns3_do_role_switch.

    >> + pm_runtime_get_sync(cdns->dev);
    >> + cdns3_role_stop(cdns);
    >> +
    >> + if (host) {
    >> + if (cdns->roles[CDNS3_ROLE_HOST])
    >> + cdns3_do_role_switch(cdns, CDNS3_ROLE_HOST);
    >> + pm_runtime_put_sync(cdns->dev);
    >> + return;
    >> + }
    >> +
    >> + if (device)
    >> + cdns3_do_role_switch(cdns, CDNS3_ROLE_GADGET);
    >> + else
    >> + cdns3_do_role_switch(cdns, CDNS3_ROLE_END);
    >> +
    >> + pm_runtime_put_sync(cdns->dev);
    >> +}
    >> +
    >> +/**
    >> + * cdns3_probe - probe for cdns3 core device
    >> + * @pdev: Pointer to cdns3 core platform device
    >> + *
    >> + * Returns 0 on success otherwise negative errno
    >> + */
    >> +static int cdns3_probe(struct platform_device *pdev)
    >> +{
    >> + struct device *dev = &pdev->dev;
    >> + struct resource *res;
    >> + struct cdns3 *cdns;
    >> + void __iomem *regs;
    >> + int ret;
    >> +
    >> + cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
    >> + if (!cdns)
    >> + return -ENOMEM;
    >> +
    >> + cdns->dev = dev;
    >> +
    >> + platform_set_drvdata(pdev, cdns);
    >> +
    >> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
    >> + if (!res) {
    >> + dev_err(dev, "missing IRQ\n");
    >> + return -ENODEV;
    >> + }
    >> + cdns->irq = res->start;
    >> +
    >> + /*
    >> + * Request memory region
    >> + * region-0: xHCI
    >> + * region-1: Peripheral
    >> + * region-2: OTG registers
    >> + */
    >
    >The memory region order is different from the dt-binding.
    >There it is OTG, host(xhci), device (peripheral).

    I corrected dt-binding.
    >
    >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
    >> + regs = devm_ioremap_resource(dev, res);
    >> +
    >> + if (IS_ERR(regs))
    >> + return PTR_ERR(regs);
    >> + cdns->xhci_regs = regs;
    >> + cdns->xhci_res = res;
    >> +
    >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
    >> + regs = devm_ioremap_resource(dev, res);
    >> + if (IS_ERR(regs))
    >> + return PTR_ERR(regs);
    >> + cdns->dev_regs = regs;
    >> +
    >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
    >> + regs = devm_ioremap_resource(dev, res);
    >> + if (IS_ERR(regs))
    >> + return PTR_ERR(regs);
    >> + cdns->otg_regs = regs;
    >> +
    >> + mutex_init(&cdns->mutex);
    >> +
    >> + cdns->phy = devm_phy_get(dev, "cdns3,usbphy");
    >
    >"cdns3,usbphy" is not documented in dt-binding.

    I assume that I should add to dt-binding (cdns3-usb.txt) something like:
    - phys: reference to the USB PHY
    - phy-names: name of the USB PHY, should be " cdns3,usbphy "

    >
    >> + if (IS_ERR(cdns->phy)) {
    >> + dev_info(dev, "no generic phy found\n");
    >> + cdns->phy = NULL;
    >> + /*
    >> + * fall through here!
    >> + * if no generic phy found, phy init
    >> + * should be done under boot!
    >> + */
    >
    >No you shouldn't fall through always if it is an error condition.
    >Something like this should work better.
    >
    > if (IS_ERR(cnds->phy)) {
    > ret = PTR_ERR(cdns->phy);
    > if (ret == -ENOSYS || ret == -ENODEV) {
    > cdns->phy = NULL;
    > } else if (ret == -EPROBE_DEFER) {
    > return ret;
    > } else {
    > dev_err(dev, "no phy found\n");
    > goto err0;
    > }
    > }
    >
    >So if PHY was provided in DT, and PHY support/drivers is present
    >and error condition means something is wrong and we have to error out.
    >
    >> + } else {
    >> + phy_init(cdns->phy);
    >> + }
    >
    >You can do phy_init() outside the else.
    >
    Thank you for explanation. I will correct this.
    >> +
    >> + ret = cdns3_core_init_role(cdns);
    >> + if (ret)
    >> + goto err1;
    >> +
    >> + INIT_WORK(&cdns->role_switch_wq, cdns3_role_switch);
    >> + if (ret)
    >> + goto err2;
    >> +
    >> + if (ret)
    >> + goto err2;
    >> +
    >> + cdns->role = cdns3_get_role(cdns);
    >
    >I think this should move to cd I'll have a some though on ns3_core_init_role().

    Ok, I will do it.
    >
    >> +
    >> + ret = devm_request_irq(dev, cdns->irq, cdns3_irq, IRQF_SHARED,
    >> + dev_name(dev), cdns);
    >> +
    >> + if (ret)
    >> + goto err2;
    >
    >How about moving request_irq to before cdsn3_core_init_role()?
    >
    >Then you can move cdns3_role_start() as well to core_init_role().
    I'll give it some though on it, but probably I will probably have to change little other function..
    So the new order should look like this:

    cdns3_drd_init
    devm_request_irq
    cdns3_core_init_role, cdns3_get_role, cdns3_role_start

    >
    >> +
    >> + ret = cdns3_role_start(cdns, cdns->role);
    >> + if (ret) {
    >> + dev_err(dev, "can't start %s role\n",
    >> + cdns3_get_current_role_driver(cdns)->name);
    >> + goto err2;
    >> + }
    >> +
    >> + device_set_wakeup_capable(dev, true);
    >> + pm_runtime_set_active(dev);
    >> + pm_runtime_enable(dev);
    >> +
    >> + /*
    >> + * The controller needs less time between bus and controller suspend,
    >> + * and we also needs a small delay to avoid frequently entering low
    >> + * power mode.
    >> + */
    >> + pm_runtime_set_autosuspend_delay(dev, 20);
    >> + pm_runtime_mark_last_busy(dev);
    >> + pm_runtime_use_autosuspend(dev);
    >> + dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
    >> +
    >> + return 0;
    >> +
    >> +err2:
    >> + cdns3_remove_roles(cdns);
    >> +err1:
    >
    >phy_exit() ?
    I will add.
    >
    >> + return ret;
    >> +}
    >> +
    >> +/**
    >> + * cdns3_remove - unbind drd driver and clean up
    >> + * @pdev: Pointer to Linux platform device
    >> + *
    >> + * Returns 0 on success otherwise negative errno
    >> + */
    >> +static int cdns3_remove(struct platform_device *pdev)
    >> +{
    >> + struct cdns3 *cdns = platform_get_drvdata(pdev);
    >> +
    >> + pm_runtime_get_sync(&pdev->dev);
    >> + pm_runtime_disable(&pdev->dev);
    >> + pm_runtime_put_noidle(&pdev->dev);
    >> + cdns3_remove_roles(cdns);
    >
    >phy_exit() ?
    I will add.
    >
    >> +
    >> + return 0;
    >> +}
    >> +
    >> +#ifdef CONFIG_OF
    >> +static const struct of_device_id of_cdns3_match[] = {
    >> + { .compatible = "cdns,usb3" },
    >> + { },
    >> +};
    >> +MODULE_DEVICE_TABLE(of, of_cdns3_match);
    >> +#endif
    >> +
    >> +#ifdef CONFIG_PM
    >> +
    >> +#ifdef CONFIG_PM_SLEEP
    >> +static int cdns3_suspend(struct device *dev)
    >> +{
    >> + //TODO: implements this function
    >> + return 0;
    >> +}
    >> +
    >> +static int cdns3_resume(struct device *dev)
    >> +{
    >> + //TODO: implements this function
    >> + return 0;
    >> +}
    >> +#endif /* CONFIG_PM_SLEEP */
    >> +static int cdns3_runtime_suspend(struct device *dev)
    >> +{ //TODO: implements this function
    >> + return 0;
    >> +}
    >> +
    >> +static int cdns3_runtime_resume(struct device *dev)
    >> +{
    >> + //TODO: implements this function
    >> + return 0;
    >> +}
    >> +#endif /* CONFIG_PM */
    >> +
    >> +static const struct dev_pm_ops cdns3_pm_ops = {
    >> + SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
    >> + SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
    >> +};
    >> +
    >> +static struct platform_driver cdns3_driver = {
    >> + .probe = cdns3_probe,
    >> + .remove = cdns3_remove,
    >> + .driver = {
    >> + .name = "cdns-usb3",
    >> + .of_match_table = of_match_ptr(of_cdns3_match),
    >> + .pm = &cdns3_pm_ops,
    >> + },
    >> +};
    >> +
    >> +static int __init cdns3_driver_platform_register(void)
    >> +{
    >> + return platform_driver_register(&cdns3_driver);
    >> +}
    >> +module_init(cdns3_driver_platform_register);
    >> +
    >> +static void __exit cdns3_driver_platform_unregister(void)
    >> +{
    >> + platform_driver_unregister(&cdns3_driver);
    >> +}
    >> +module_exit(cdns3_driver_platform_unregister);
    >> +
    >> +MODULE_ALIAS("platform:cdns3");
    >> +MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
    >> +MODULE_LICENSE("GPL v2");
    >> +MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver");
    >> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
    >> new file mode 100644
    >> index 000000000000..7c8204fe4d3d
    >> --- /dev/null
    >> +++ b/drivers/usb/cdns3/core.h
    >> @@ -0,0 +1,100 @@
    >> +/* SPDX-License-Identifier: GPL-2.0 */
    >> +/*
    >> + * Cadence USBSS DRD Driver.
    >> + *
    >> + * Copyright (C) 2017 NXP
    >> + * Copyright (C) 2018 Cadence.
    >> + *
    >> + * Authors: Peter Chen <peter.chen@nxp.com>
    >> + * Pawel Laszczak <pawell@cadence.com>
    >> + */
    >> +#include <linux/usb/otg.h>
    >> +
    >> +#ifndef __LINUX_CDNS3_CORE_H
    >> +#define __LINUX_CDNS3_CORE_H
    >> +
    >> +struct cdns3;
    >> +enum cdns3_roles {
    >> + CDNS3_ROLE_HOST = 0,
    >> + CDNS3_ROLE_GADGET,
    >> + CDNS3_ROLE_END,
    >> +};
    >> +
    >> +/**
    >> + * struct cdns3_role_driver - host/gadget role driver
    >> + * @start: start this role
    >> + * @stop: stop this role
    >> + * @suspend: suspend callback for this role
    >> + * @resume: resume callback for this role
    >> + * @irq: irq handler for this role
    >> + * @name: role name string (host/gadget)
    >> + */
    >> +struct cdns3_role_driver {
    >> + int (*start)(struct cdns3 *cdns);
    >> + void (*stop)(struct cdns3 *cdns);
    >> + int (*suspend)(struct cdns3 *cdns, bool do_wakeup);
    >> + int (*resume)(struct cdns3 *cdns, bool hibernated);
    >> + irqreturn_t (*irq)(struct cdns3 *cdns);
    >> + const char *name;
    >> +};
    >> +
    >> +#define CDNS3_NUM_OF_CLKS 5
    >> +/**
    >> + * struct cdns3 - Representation of Cadence USB3 DRD controller.
    >> + * @dev: pointer to Cadence device struct
    >> + * @xhci_regs: pointer to base of xhci registers
    >> + * @xhci_res: the resource for xhci
    >> + * @dev_regs: pointer to base of dev registers
    >> + * @otg_regs: pointer to base of otg registers
    >> + * @irq: irq number for controller
    >> + * @roles: array of supported roles for this controller
    >> + * @role: current role
    >> + * @host_dev: the child host device pointer for cdns3 core
    >> + * @gadget_dev: the child gadget device pointer for cdns3 core
    >> + * @usb: phy for this controller
    >> + * @role_switch_wq: work queue item for role switch
    >> + * @in_lpm: the controller in low power mode
    >> + * @wakeup_int: the wakeup interrupt
    >> + * @mutex: the mutex for concurrent code at driver
    >> + * @dr_mode: supported mode of operation it can be only Host, only Device
    >> + * or OTG mode that allow to switch between Device and Host mode.
    >> + * This field based on hardware configuration and cant't be changed.
    >But dr_mode can be forced in device-tree. So it isn't really only hardware configuration.
    Right, I added dr_mode to dt-binding , so we have STRAP bits in registers and additionally
    optional dr_mode in device-tree. Driver should take into account this two options.
    I will remove this line.

    >
    >> + * @current_dr_role: current mode of operation when in dual-role mode
    >> + * @desired_dr_role: desired mode of operation when in dual-role mode.
    >> + * This value can be changed during runtime.
    >> + * Available options depends on dr_mode:
    >> + * dr_mode | desired_dr_role and current_dr_role
    >> + * ----------------------------------------------------------------
    >> + * USB_DR_MODE_HOST | only USB_DR_MODE_HOST
    >> + * USB_DR_MODE_PERIPHERAL | only USB_DR_MODE_PERIPHERAL
    >> + * USB_DR_MODE_OTG | only USB_DR_MODE_HOST
    >> + * USB_DR_MODE_OTG | only USB_DR_MODE_PERIPHERAL
    >> + * USB_DR_MODE_OTG | USB_DR_MODE_OTG
    >
    >Do you need to update the right hand side to reflect ROLEs instead of MODE?

    I see that there are incorrect name. There should be mode instead role.
    In structure below the names are correct.
    >
    >> + *
    >> + * Desired_dr_role can be changed by means of debugfs.
    >> + * @root: debugfs root folder pointer
    >> + */
    >> +struct cdns3 {
    >> + struct device *dev;
    >> + void __iomem *xhci_regs;
    >> + struct resource *xhci_res;
    >> + struct cdns3_usb_regs __iomem *dev_regs;
    >> + struct cdns3_otg_regs *otg_regs;
    >> + int irq;
    >> + struct cdns3_role_driver *roles[CDNS3_ROLE_END];
    >> + enum cdns3_roles role;
    >> + struct device *host_dev;
    >> + struct device *gadget_dev;
    >> + struct phy *phy;
    >> + struct work_struct role_switch_wq;
    >> + int in_lpm:1;
    >> + int wakeup_int:1;
    >> + /* mutext used in workqueue*/
    >> + struct mutex mutex;
    >> + enum usb_dr_mode dr_mode;
    >> + enum usb_dr_mode current_dr_mode;
    >> + enum usb_dr_mode desired_dr_mode;
    >> + struct dentry *root;
    >> +};
    >> +
    >> +#endif /* __LINUX_CDNS3_CORE_H */
    >>
    >
    >cheers,
    >-roger
    >--
    >Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
    >Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

    Thank for all your comments,
    Cheers,
    Pawel

    \
     
     \ /
      Last update: 2018-11-25 13:37    [W:2.683 / U:0.752 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site