lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 24/26] Staging: fbtft: fb_tls8204: Switch to the gpio descriptor interface
This switches the fb_tls8204.c to use GPIO descriptors
rather than numerical gpios.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
drivers/staging/fbtft/fb_tls8204.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/fbtft/fb_tls8204.c b/drivers/staging/fbtft/fb_tls8204.c
index 277b6ed9c725..bec6dd0ffb01 100644
--- a/drivers/staging/fbtft/fb_tls8204.c
+++ b/drivers/staging/fbtft/fb_tls8204.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

@@ -94,7 +94,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
/* The display is 102x68 but the LCD is 84x48.
* Set the write pointer at the start of each row.
*/
- gpio_set_value(par->gpio.dc, 0);
+ gpiod_set_value(par->gpio.dc, 0);
write_reg(par, 0x80 | 0);
write_reg(par, 0x40 | y);

@@ -109,7 +109,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
*buf++ = ch;
}
/* Write the row */
- gpio_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);
ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
if (ret < 0) {
dev_err(par->info->device,
--
2.17.1
\
 
 \ /
  Last update: 2018-11-25 12:44    [W:0.109 / U:3.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site