lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 19/26] Staging: fbtft: fb_ssd1331: Switch to the gpio descriptor interface
This switches the fb_ssd1331.c to use GPIO descriptors
rather than numerical gpios.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
drivers/staging/fbtft/fb_ssd1331.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c
index 0b614c84822e..9f54fe28d511 100644
--- a/drivers/staging/fbtft/fb_ssd1331.c
+++ b/drivers/staging/fbtft/fb_ssd1331.c
@@ -2,7 +2,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

@@ -80,8 +80,8 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
va_start(args, len);

*buf = (u8)va_arg(args, unsigned int);
- if (par->gpio.dc != -1)
- gpio_set_value(par->gpio.dc, 0);
+ if (!par->gpio.dc)
+ gpiod_set_value(par->gpio.dc, 0);
ret = par->fbtftops.write(par, par->buf, sizeof(u8));
if (ret < 0) {
va_end(args);
@@ -103,8 +103,8 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
return;
}
}
- if (par->gpio.dc != -1)
- gpio_set_value(par->gpio.dc, 1);
+ if (!par->gpio.dc)
+ gpiod_set_value(par->gpio.dc, 1);
va_end(args);
}

--
2.17.1
\
 
 \ /
  Last update: 2018-11-25 12:39    [W:0.136 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site