lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 16/26] Staging: fbtft: fb_uc1701: Switch to the gpio descriptor interface
This switches the fb_uc1701.c to use GPIO descriptors
rather than numerical gpios.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
drivers/staging/fbtft/fb_uc1701.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/fbtft/fb_uc1701.c b/drivers/staging/fbtft/fb_uc1701.c
index 0a3531d6eb39..e4ccc73868a7 100644
--- a/drivers/staging/fbtft/fb_uc1701.c
+++ b/drivers/staging/fbtft/fb_uc1701.c
@@ -11,7 +11,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

@@ -136,9 +136,9 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
write_reg(par, LCD_PAGE_ADDRESS | (u8)y);
write_reg(par, 0x00);
write_reg(par, LCD_COL_ADDRESS);
- gpio_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);
ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
- gpio_set_value(par->gpio.dc, 0);
+ gpiod_set_value(par->gpio.dc, 0);
}

if (ret < 0)
--
2.17.1
\
 
 \ /
  Last update: 2018-11-25 12:37    [W:0.084 / U:13.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site