lkml.org 
[lkml]   [2018]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 12/26] Staging: fbtft: fb_ssd1325: Switch to the gpio descriptor interface
This switches the fb_ssd1325.c to use GPIO descriptors
rather than numerical gpios.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
drivers/staging/fbtft/fb_ssd1325.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ssd1325.c b/drivers/staging/fbtft/fb_ssd1325.c
index f974f7fc4d79..8a3140d41d8b 100644
--- a/drivers/staging/fbtft/fb_ssd1325.c
+++ b/drivers/staging/fbtft/fb_ssd1325.c
@@ -6,7 +6,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>

#include "fbtft.h"
@@ -35,7 +35,7 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);

- gpio_set_value(par->gpio.cs, 0);
+ gpiod_set_value(par->gpio.cs, 0);

write_reg(par, 0xb3);
write_reg(par, 0xf0);
@@ -155,7 +155,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
}
}

- gpio_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);

/* Write data */
ret = par->fbtftops.write(par, par->txbuf.buf,
--
2.17.1
\
 
 \ /
  Last update: 2018-11-25 12:34    [W:0.150 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site