[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH AUTOSEL 4.14 01/21] pinctrl: meson: fix pinconf bias disable
From: Jerome Brunet <>

[ Upstream commit e39f9dd8206ad66992ac0e6218ef1ba746f2cce9 ]

If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
force a pull-down bias on the pin.

Instead of the pull type register bank, the driver should access the pull
enable register bank.

Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Jerome Brunet <>
Acked-by: Neil Armstrong <>
Signed-off-by: Linus Walleij <>
Signed-off-by: Sasha Levin <>
drivers/pinctrl/meson/pinctrl-meson.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 66ed70c12733..6c43322dbb97 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -273,7 +273,7 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);

meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
+ ret = regmap_update_bits(pc->reg_pullen, reg,
BIT(bit), 0);
if (ret)
return ret;
 \ /
  Last update: 2018-11-22 21:00    [W:0.220 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site