lkml.org 
[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] USB: Disable USB2 LPM at shutdown
On Wed, Nov 07, 2018 at 01:34:01AM +0800, Kai-Heng Feng wrote:
> The QCA Rome USB Bluetooth controller has several issues once LPM gets
> enabled:
> - Fails to get enumerated in coldboot. [1]
> - Drains more power (~ 0.2W) when the system is in S5. [2]
> - Disappears after a warmboot. [2]
>
> The issue happens because the device lingers at LPM L1 in S5, so device
> can't get enumerated even after a reboot.
>
> Disalbe LPM at shutdown can solve the issue.
>
> [1] https://bugs.launchpad.net/bugs/1757218
> [2] https://patchwork.kernel.org/patch/10607097/
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/usb/core/port.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
> index 1a06a4b5fbb1..15f6924a4d84 100644
> --- a/drivers/usb/core/port.c
> +++ b/drivers/usb/core/port.c
> @@ -285,6 +285,15 @@ static int usb_port_runtime_suspend(struct device *dev)
> }
> #endif
>
> +static void usb_port_shutdown(struct device *dev)
> +{
> + struct usb_port *port_dev = to_usb_port(dev);
> +
> + if (port_dev->child)
> + usb_set_usb2_hardware_lpm(port_dev->child, 0);

Shouldn't you also test if child->usb2_hw_lpm_enabled before calling
this?

Or at the least usb2_hw_lpm_capable?

You did test this on a bunch of USB 1 and USB 3 devices, right?

thanks,

greg k-h

\
 
 \ /
  Last update: 2018-11-23 16:06    [W:0.093 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site