lkml.org 
[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC PATCH v2 06/15] usb:cdns3: Adds Host support
From
Date
On 18/11/18 12:09, Pawel Laszczak wrote:
> Patch adds host-export.h and host.c file and mplements functions that
> allow to initialize, start and stop XHCI host driver.
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> drivers/usb/cdns3/Kconfig | 10 ++
> drivers/usb/cdns3/Makefile | 1 +
> drivers/usb/cdns3/core.c | 7 +-
> drivers/usb/cdns3/host-export.h | 30 ++++
> drivers/usb/cdns3/host.c | 256 ++++++++++++++++++++++++++++++++
> 5 files changed, 302 insertions(+), 2 deletions(-)
> create mode 100644 drivers/usb/cdns3/host-export.h
> create mode 100644 drivers/usb/cdns3/host.c
>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index eb22a8692991..d92bc3d68eb0 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -10,6 +10,16 @@ config USB_CDNS3
>
> if USB_CDNS3
>
> +config USB_CDNS3_HOST
> + bool "Cadence USB3 host controller"
> + depends on USB_XHCI_HCD
> + help
> + Say Y here to enable host controller functionality of the
> + cadence driver.
> +
> + Host controller is compliance with XHCI so it will use
> + standard XHCI driver.
> +
> config USB_CDNS3_PCI_WRAP
> tristate "PCIe-based Platforms"
> depends on USB_PCI && ACPI
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index e779b2a2f8eb..976117ba67ff 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -2,4 +2,5 @@ obj-$(CONFIG_USB_CDNS3) += cdns3.o
> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
>
> cdns3-y := core.o drd.o
> +cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
> cdns3-pci-y := cdns3-pci-wrap.o
> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> index dbee4325da7f..4cb820be9ff3 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -17,6 +17,7 @@
>
> #include "gadget.h"
> #include "core.h"
> +#include "host-export.h"
> #include "drd.h"
>
> static inline struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns)
> @@ -98,7 +99,8 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
> }
>
> if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
> - //TODO: implements host initialization
> + if (cdns3_host_init(cdns))
> + dev_info(dev, "doesn't support host\n");

dev_err()

And you need to error out with error code.

> }
>
> if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
> @@ -142,7 +144,7 @@ static irqreturn_t cdns3_irq(int irq, void *data)
>
> static void cdns3_remove_roles(struct cdns3 *cdns)
> {
> - //TODO: implements this function

if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST)

> + cdns3_host_remove(cdns);

How about calling it cdns3_host_exit() to complement cdns3_host_init().

> }
>
> static int cdns3_do_role_switch(struct cdns3 *cdns, enum cdns3_roles role)
> @@ -410,6 +412,7 @@ static struct platform_driver cdns3_driver = {
>
> static int __init cdns3_driver_platform_register(void)
> {
> + cdns3_host_driver_init();
> return platform_driver_register(&cdns3_driver);
> }
> module_init(cdns3_driver_platform_register);
> diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
> new file mode 100644
> index 000000000000..f8f3b230b472
> --- /dev/null
> +++ b/drivers/usb/cdns3/host-export.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Cadence USBSS DRD Driver -Host Export APIs
> + *
> + * Copyright (C) 2017 NXP
> + *
> + * Authors: Peter Chen <peter.chen@nxp.com>
> + */
> +#ifndef __LINUX_CDNS3_HOST_EXPORT
> +#define __LINUX_CDNS3_HOST_EXPORT
> +
> +#ifdef CONFIG_USB_CDNS3_HOST
> +
> +int cdns3_host_init(struct cdns3 *cdns);
> +void cdns3_host_remove(struct cdns3 *cdns);
> +void cdns3_host_driver_init(void);
> +
> +#else
> +
> +static inline int cdns3_host_init(struct cdns3 *cdns)
> +{
> + return -ENXIO;
> +}
> +
> +static inline void cdns3_host_remove(struct cdns3 *cdns) { }
> +static inline void cdns3_host_driver_init(void) {}
> +
> +#endif /* CONFIG_USB_CDNS3_HOST */
> +
> +#endif /* __LINUX_CDNS3_HOST_EXPORT */
> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
> new file mode 100644
> index 000000000000..0dd47976cb28
> --- /dev/null
> +++ b/drivers/usb/cdns3/host.c
> @@ -0,0 +1,256 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Cadence USBSS DRD Driver - host side
> + *
> + * Copyright (C) 2018 Cadence Design Systems.
> + * Copyright (C) 2018 NXP
> + *
> + * Authors: Peter Chen <peter.chen@nxp.com>
> + * Pawel Laszczak <pawell@cadence.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/usb/of.h>
> +
> +#include "../host/xhci.h"
> +#include "core.h"
> +#include "host-export.h"
> +
> +static struct hc_driver __read_mostly xhci_cdns3_hc_driver;
> +
> +static void xhci_cdns3_quirks(struct device *dev, struct xhci_hcd *xhci)
> +{
> + /*
> + * As of now platform drivers don't provide MSI support so we ensure
> + * here that the generic code does not try to make a pci_dev from our
> + * dev struct in order to setup MSI
> + */
> + xhci->quirks |= XHCI_PLAT;
> +}
> +
> +static int xhci_cdns3_setup(struct usb_hcd *hcd)
> +{
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> + u32 command;
> + int ret;
> +
> + ret = xhci_gen_setup(hcd, xhci_cdns3_quirks);
> + if (ret)
> + return ret;
> +
> + /* set usbcmd.EU3S */
> + command = readl(&xhci->op_regs->command);
> + command |= CMD_PM_INDEX;
> + writel(command, &xhci->op_regs->command);
> +
> + return 0;
> +}
> +
> +static const struct xhci_driver_overrides xhci_cdns3_overrides __initconst = {
> + .extra_priv_size = sizeof(struct xhci_hcd),
> + .reset = xhci_cdns3_setup,
> +};
> +
> +struct cdns3_host {
> + struct device dev;
> + struct usb_hcd *hcd;
> +};
> +
> +static irqreturn_t cdns3_host_irq(struct cdns3 *cdns)
> +{
> + struct device *dev = cdns->host_dev;
> + struct usb_hcd *hcd;
> +
> + if (dev)
> + hcd = dev_get_drvdata(dev);
> + else
> + return IRQ_NONE;
> +
> + if (hcd)
> + return usb_hcd_irq(cdns->irq, hcd);
> + else
> + return IRQ_NONE;
Why can't you just reuse the xhci-platform driver and let it manage the IRQ?
Since it is a shared IRQ, different drivers can request the same IRQ and return IRQ_NONE
if the IRQ wasn't from their device.

> +}
> +
> +static void cdns3_host_release(struct device *dev)
> +{
> + struct cdns3_host *host = container_of(dev, struct cdns3_host, dev);
> +
> + kfree(host);
> +}
> +
> +static int cdns3_host_start(struct cdns3 *cdns)
> +{
> + struct cdns3_host *host;
> + struct device *dev;
> + struct device *sysdev;
> + struct xhci_hcd *xhci;
> + int ret;
> +
> + host = kzalloc(sizeof(*host), GFP_KERNEL);
> + if (!host)
> + return -ENOMEM;
> +
> + dev = &host->dev;
> + dev->release = cdns3_host_release;
> + dev->parent = cdns->dev;
> + dev_set_name(dev, "xhci-cdns3");
> + cdns->host_dev = dev;
> + ret = device_register(dev);
> + if (ret)
> + goto err1;
> +
> + sysdev = cdns->dev;
> + /* Try to set 64-bit DMA first */
> + if (WARN_ON(!sysdev->dma_mask))
> + /* Platform did not initialize dma_mask */
> + ret = dma_coerce_mask_and_coherent(sysdev,
> + DMA_BIT_MASK(64));
> + else
> + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
> +
> + /* If setting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
> + if (ret) {
> + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
> + if (ret)
> + return ret;
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_no_callbacks(dev);
> + pm_runtime_enable(dev);
> + host->hcd = __usb_create_hcd(&xhci_cdns3_hc_driver, sysdev, dev,
> + dev_name(dev), NULL);
> + if (!host->hcd) {
> + ret = -ENOMEM;
> + goto err2;
> + }
> +
> + host->hcd->regs = cdns->xhci_regs;
> + host->hcd->rsrc_start = cdns->xhci_res->start;
> + host->hcd->rsrc_len = resource_size(cdns->xhci_res);
> +
> + device_wakeup_enable(host->hcd->self.controller);
> + xhci = hcd_to_xhci(host->hcd);
> +
> + xhci->main_hcd = host->hcd;
> + xhci->shared_hcd = __usb_create_hcd(&xhci_cdns3_hc_driver, sysdev, dev,
> + dev_name(dev), host->hcd);
> + if (!xhci->shared_hcd) {
> + ret = -ENOMEM;
> + goto err3;
> + }
> +
> + host->hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> + xhci->shared_hcd->tpl_support = host->hcd->tpl_support;
> + ret = usb_add_hcd(host->hcd, 0, IRQF_SHARED);
> + if (ret)
> + goto err4;
> +
> + ret = usb_add_hcd(xhci->shared_hcd, 0, IRQF_SHARED);
> + if (ret)
> + goto err5;
> +
> + device_set_wakeup_capable(dev, true);

All this is being done by the xhci-plat.c

You can make use of it by just creating a xhci-hcd platform device.

e.g.
platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
platform_device_add_resources() to add IRQ and memory resource.
platform_device_add_properties() to add any quirks.
platform_device_add()


> +
> + return 0;
> +
> +err5:
> + usb_remove_hcd(host->hcd);
> +err4:
> + usb_put_hcd(xhci->shared_hcd);
> +err3:
> + usb_put_hcd(host->hcd);
> +err2:
> + device_del(dev);
> +err1:
> + put_device(dev);
> + cdns->host_dev = NULL;
> + return ret;
> +}
> +
> +static void cdns3_host_stop(struct cdns3 *cdns)
> +{
> + struct device *dev = cdns->host_dev;
> + struct xhci_hcd *xhci;
> + struct usb_hcd *hcd;
> +
> + if (dev) {
> + hcd = dev_get_drvdata(dev);
> + xhci = hcd_to_xhci(hcd);
> + usb_remove_hcd(xhci->shared_hcd);
> + usb_remove_hcd(hcd);
> + synchronize_irq(cdns->irq);
> + usb_put_hcd(xhci->shared_hcd);
> + usb_put_hcd(hcd);
> + cdns->host_dev = NULL;
> + pm_runtime_set_suspended(dev);
> + pm_runtime_disable(dev);
> + device_del(dev);
> + put_device(dev);
> + }

You can replace this with just
platform_device_unregister(xhci_dev);

> +}
> +
> +#if CONFIG_PM
> +static int cdns3_host_suspend(struct cdns3 *cdns, bool do_wakeup)
> +{
> + struct device *dev = cdns->host_dev;
> + struct xhci_hcd *xhci;
> +
> + if (!dev)
> + return 0;
> +
> + xhci = hcd_to_xhci(dev_get_drvdata(dev));
> + return xhci_suspend(xhci, do_wakeup);
> +}
> +
> +static int cdns3_host_resume(struct cdns3 *cdns, bool hibernated)
> +{
> + struct device *dev = cdns->host_dev;
> + struct xhci_hcd *xhci;
> +
> + if (!dev)
> + return 0;
> +
> + xhci = hcd_to_xhci(dev_get_drvdata(dev));
> + return xhci_resume(xhci, hibernated);
> +}

These won't be required any more as xhci-plat is doing this.

> +#endif /* CONFIG_PM */
> +
> +int cdns3_host_init(struct cdns3 *cdns)
> +{
> + struct cdns3_role_driver *rdrv;
> +
> + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
> + if (!rdrv)
> + return -ENOMEM;
> +
> + rdrv->start = cdns3_host_start;
> + rdrv->stop = cdns3_host_stop;
> + rdrv->irq = cdns3_host_irq;
> +#if CONFIG_PM
> + rdrv->suspend = cdns3_host_suspend;
> + rdrv->resume = cdns3_host_resume;
> +#endif /* CONFIG_PM */
> + rdrv->name = "host";
> + cdns->roles[CDNS3_ROLE_HOST] = rdrv;
> +
> + return 0;
> +}
> +
> +void cdns3_host_remove(struct cdns3 *cdns)
> +{
> + cdns3_host_stop(cdns);

calling cdns3_host_stop() here can lead to problems as Controller might be in
peripheral mode at this point. The core driver needs to ensure that relevant role
is stopped before calling cdns3_host_remove().

Here you need to unregister the role driver though.

cdns->roles[CDNS3_ROLE_HOST] = NULL;

> +}
> +
> +void __init cdns3_host_driver_init(void)
> +{
> + xhci_init_driver(&xhci_cdns3_hc_driver, &xhci_cdns3_overrides);
> +}
>

cheers,
-roger

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-23 15:24    [W:0.386 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site