lkml.org 
[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
From
Date
Hi Boris,


On 22/11/18 20:02, Boris Brezillon wrote:
> On Thu, 22 Nov 2018 17:54:54 +0000
> Vitor Soares <vitor.soares@synopsys.com> wrote:
>
>> From: Vitor Soares <soares@synopsys.com>
>>
>> This patch slipts dw-i3c-master.c into three pieces:
>> dw-i3c-master.c - contains the code that interacts directly with the
>> core in master mode.
>>
>> dw-i3c-platdrv.c - contains the code specific to the platform driver.
>>
>> dw-i3c-core.h - contains the definitions and declarations shared by
>> dw-i3c-master and dw-i3c-platdrv
>>
>> This patch will allow SOC integrators to add their code specific to
>> DesignWare I3C IP.
> Isn't it too early to do this change? Can't we wait until we have a SoC
> that actually embeds this IP?


I'm trying to turn it more flexible so the other can reuse the code.


>
>> Signed-off-by: Vitor Soares <soares@synopsys.com>
>> ---
>> drivers/i3c/master/Kconfig | 9 +-
>> drivers/i3c/master/Makefile | 5 +-
>> drivers/i3c/master/dw-i3c-core.h | 214 ++++++++++++++++++++++++++
>> drivers/i3c/master/dw-i3c-master.c | 299 ++----------------------------------
>> drivers/i3c/master/dw-i3c-platdrv.c | 112 ++++++++++++++
> I'd prefer to have a dw/ subdir where you'd place all dw files.


Sure. I will change to this:

../dwc
   |-core.h
   |-master.c
   |-platdrv.c


so the user doesn't need to write dw-i3c.. several times. The folder
name is the same as for other subsystem (e.g. PCI).

What do you think?

>
>> 5 files changed, 349 insertions(+), 290 deletions(-)
>> create mode 100644 drivers/i3c/master/dw-i3c-core.h
>> create mode 100644 drivers/i3c/master/dw-i3c-platdrv.c
>>
>> diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
>> index 8ee1ce6..fdc6e46 100644
>> --- a/drivers/i3c/master/Kconfig
>> +++ b/drivers/i3c/master/Kconfig
>> @@ -5,9 +5,14 @@ config CDNS_I3C_MASTER
>> help
>> Enable this driver if you want to support Cadence I3C master block.
>>
>> -config DW_I3C_MASTER
>> - tristate "Synospsys DesignWare I3C master driver"
>> +config DW_I3C_CORE
>> + tristate
>> +
>> +config DW_I3C_PLATFORM
>> + tristate "Synospsys DesignWare I3C Platform driver"
>> + select DW_I3C_CORE
>> depends on I3C
>> + depends on HAS_IOMEM
>> depends on !(ALPHA || PARISC)
>> # ALPHA and PARISC needs {read,write}sl()
>> help
>> diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
>> index fc53939..004ad1c 100644
>> --- a/drivers/i3c/master/Makefile
>> +++ b/drivers/i3c/master/Makefile
>> @@ -1,2 +1,5 @@
>> obj-$(CONFIG_CDNS_I3C_MASTER) += i3c-master-cdns.o
>> -obj-$(CONFIG_DW_I3C_MASTER) += dw-i3c-master.o
>> +obj-$(CONFIG_DW_I3C_CORE) += dw-i3c-core.o
>> +dw-i3c-core-objs := dw-i3c-master.o
>> +obj-$(CONFIG_DW_I3C_PLATFORM) += dw-i3c-platform.o
>> +dw-i3c-platform-objs := dw-i3c-platdrv.o
> Do we really have to create one module for the core and one per SoC?
> Can't we have everything in the same .ko?


This will help the introduction of new modules. The design in my mind is
to have:
-core.h

-common.c

-master.c

-slave.c

...

I'm not sure if make sense to change core.h to common.h.



Thaks for your feedback.


Best regards,

Vitor Soares

\
 
 \ /
  Last update: 2018-11-23 13:41    [W:0.058 / U:1.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site