lkml.org 
[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
From
Date
Hi,

On 21/11/18 1:40 PM, Yoshihiro Shimoda wrote:
> This patch modifies rcar_gen3_init_otg() procedure to follow Figure
> 73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00".
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> This patch is based on the latest linux-phy / next branch
> (commit id = 0eb86fa77f0f0c81631a030f10679a45c05df33a).

This patch has some weird characters which I saw while applying.

You can see "=20", =3D in the raw format
https://lore.kernel.org/lkml/1542787663-32142-1-git-send-email-yoshihiro.shimoda.uh@renesas.com/raw

Please fix and repost the patch.

Thanks
Kishon
>
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index d0f412c..a9e53e8 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
> void __iomem *usb2_base = ch->base;
> u32 val;
>
> + rcar_gen3_set_linectrl(ch, 0, 1);
> + val = readl(usb2_base + USB2_LINECTRL1);
> + writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
> + usb2_base + USB2_LINECTRL1);
> +
> val = readl(usb2_base + USB2_VBCTRL);
> writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
> - writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
> - rcar_gen3_control_otg_irq(ch, 1);
> val = readl(usb2_base + USB2_ADPCTRL);
> writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
> - val = readl(usb2_base + USB2_LINECTRL1);
> - rcar_gen3_set_linectrl(ch, 0, 0);
> - writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
> - usb2_base + USB2_LINECTRL1);
> +
> + msleep(20);
> +
> + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
> +
> + rcar_gen3_control_otg_irq(ch, 1);
>
> rcar_gen3_device_recognition(ch);
> }
>

\
 
 \ /
  Last update: 2018-11-23 08:56    [W:0.131 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site