lkml.org 
[lkml]   [2018]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/9] EDAC drivers for Armada XP L2 and DDR
Date
The current plan is for these to go in via the ARM tree once appropriate
Reviews/Acks have been given

http://lists.infradead.org/pipermail/linux-arm-kernel/2017-August/525561.html

This series adds drivers for the L2 cache and DDR RAM ECC functionality as
found on the MV78230/MV78x60 SoCs. Jan has tested these changes with the
MV78460 (on a custom board with a DDR3 ECC DIMM), Chris has tested these
changes with 88F6820 and 98dx3236 (both a custom boards with fixed DDR3 + ECC).

Also contained in this series is an additional debugfs wrapper.

Compared to the previous v6 series I've dropped the marvell,ecc-disable
property.

Compared to the previous v5 series I've split the dt-binding documentation into
its own patch and updated armada_xp_edac.c to use a SPDX license.

Compared to the previous v4 series I've added my s-o-b to some of Jan's
patches and rebased against v4.19.0.

Compared to the previous v3 series, the following changes have been made:
- Use shorter names for the AURORA ECC and parity registers
- Numerous formatting changes to edac/armada_xp.c (as requested by Boris)
- Added support for Armada-38x and 98dx3236 SoCs

Compared to the previous v2 series, the following changes have been made:
- Allocate EDAC structures later during probing and drop devres support
patches (requested by Boris)
- Make drvdata->width usage consistent according to the comment (suggested by
Chris)

Compared to the previous v1 series, the following changes have been made:
- Add the aurora-l2 register defines earlier in the series (suggested by
Russell King and Gregory CLEMENT )
- Changed the DT vendor prefix from "arm" to "marvell" for the ecc-enable/disable
properties on the aurora-l2 (suggested by Russell King)
- Fix some warnings reported by checkpatch

Compared to the original RFC series, the following changes have been made:
- Integrated Chris' patches for parity and ECC configuration via DT
- Merged the DDR RAM and L2 cache drivers (as requested by Boris, analogous
to fsl_ddr_edac.c and mpc85xx_edac.c)
- Added myself to MAINTAINERS (requested by Boris)
- L2 cache: Track the msg size and use snprintf (review comment by Chris)
- L2 cache: Split error injection from the check function (review comment by
Chris)
- DDR RAM: Allow 16 bit width in addition to 32 and 64 bit (review comment by
Chris)
- Use of_match_ptr() (review comments by Chris)
- Minor checkpatch cleanups

Chris Packham (4):
ARM: l2x0: support parity-enable/disable on aurora
dt-bindings: ARM: document marvell,ecc-enable binding
ARM: l2x0: add marvell,ecc-enable property for aurora
EDAC: armada_xp: Add support for more SoCs

Jan Luebbe (5):
ARM: l2c: move cache-aurora-l2.h to asm/hardware
ARM: aurora-l2: add prefix to MAX_RANGE_SIZE
ARM: aurora-l2: add defines for parity and ECC registers
EDAC: Add missing debugfs_create_x32 wrapper
EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC

.../devicetree/bindings/arm/l2c2x0.txt | 1 +
MAINTAINERS | 6 +
.../asm/hardware}/cache-aurora-l2.h | 50 +-
arch/arm/mm/cache-l2x0.c | 18 +-
drivers/edac/Kconfig | 7 +
drivers/edac/Makefile | 1 +
drivers/edac/armada_xp_edac.c | 635 ++++++++++++++++++
drivers/edac/debugfs.c | 11 +
drivers/edac/edac_module.h | 5 +
9 files changed, 730 insertions(+), 4 deletions(-)
rename arch/arm/{mm => include/asm/hardware}/cache-aurora-l2.h (50%)
create mode 100644 drivers/edac/armada_xp_edac.c

--
2.19.1

\
 
 \ /
  Last update: 2018-11-22 01:13    [W:0.105 / U:16.600 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site