lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/14] clocksource/drivers/timer-milbeaut: Add Milbeaut M10V timer
From
Date

Hi Sugaya,


On 19/11/2018 02:01, Sugaya Taichi wrote:
> Add Milbeaut M10V timer using 32bit timer in peripheral.

Give a better description of the timer as it is new timer introduced.

> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
> ---
> drivers/clocksource/Kconfig | 8 +++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-m10v.c | 146 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 155 insertions(+)
> create mode 100644 drivers/clocksource/timer-m10v.c
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 55c77e4..a278d72 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -638,4 +638,12 @@ config GX6605S_TIMER
> help
> This option enables support for gx6605s SOC's timer.
>
> +config M10V_TIMER
> + bool "Milbeaut M10V timer driver" if COMPILE_TEST
> + depends on OF
> + depends on ARM
> + select TIMER_OF
> + help
> + Enables the support for Milbeaut M10V timer driver.
> +
> endmenu
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index dd91381..8e908b4 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
> obj-$(CONFIG_OWL_TIMER) += timer-owl.o
> +obj-$(CONFIG_M10V_TIMER) += timer-m10v.o
> obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
> obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
>
> diff --git a/drivers/clocksource/timer-m10v.c b/drivers/clocksource/timer-m10v.c
> new file mode 100644
> index 0000000..ff97c23
> --- /dev/null
> +++ b/drivers/clocksource/timer-m10v.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Socionext Inc.
> + */
> +
> +#include <linux/clk.h>

------->

> +#include <linux/clockchips.h>

It is included from timer-of.h

<-------

> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqreturn.h>

------->

> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>

Those are not needed IMO.

<---------


> +#include "timer-of.h"
> +
> +#define FSL_TMR_TMCSR_OFS 0x0
> +#define FSL_TMR_TMR_OFS 0x4
> +#define FSL_TMR_TMRLR1_OFS 0x8
> +#define FSL_TMR_TMRLR2_OFS 0xc
> +#define FSL_RMT_REGSZPCH 0x10
> +
> +#define FSL_TMR_TMCSR_OUTL BIT(5)
> +#define FSL_TMR_TMCSR_RELD BIT(4)
> +#define FSL_TMR_TMCSR_INTE BIT(3)
> +#define FSL_TMR_TMCSR_UF BIT(2)
> +#define FSL_TMR_TMCSR_CNTE BIT(1)
> +#define FSL_TMR_TMCSR_TRG BIT(0)
> +
> +#define FSL_TMR_TMCSR_CSL_DIV2 0
> +#define FSL_TMR_TMCSR_CSL BIT(10)
> +
> +#define M10V_TIMER_RATING 500
> +
> +static irqreturn_t m10v_timer_interrupt(int irq, void *dev_id)
> +{
> + struct clock_event_device *clk = dev_id;
> + struct timer_of *to = to_timer_of(clk);
> + u32 val;
> +
> + val = readl_relaxed(timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> + val &= ~FSL_TMR_TMCSR_UF;
> + writel_relaxed(val, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> +
> + clk->event_handler(clk);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int m10v_set_state_periodic(struct clock_event_device *clk)
> +{
> + struct timer_of *to = to_timer_of(clk);
> + u32 val = (FSL_TMR_TMCSR_CSL_DIV2 * FSL_TMR_TMCSR_CSL);

FSL_TMR_TMCSR_CSL_DIV2 is zero, so val is always zero.

> + writel_relaxed(val, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> +
> + writel_relaxed(to->of_clk.period, timer_of_base(to) +
> + FSL_TMR_TMRLR1_OFS);
> + val |= FSL_TMR_TMCSR_RELD | FSL_TMR_TMCSR_CNTE |
> + FSL_TMR_TMCSR_TRG | FSL_TMR_TMCSR_INTE;
> + writel_relaxed(val, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> + return 0;
> +}
> +
> +static int m10v_set_state_oneshot(struct clock_event_device *clk)
> +{
> + struct timer_of *to = to_timer_of(clk);
> + u32 val = (FSL_TMR_TMCSR_CSL_DIV2 * FSL_TMR_TMCSR_CSL);
> +
> + writel_relaxed(val, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> + return 0;
> +}
> +
> +static int m10v_clkevt_next_event(unsigned long event,
> + struct clock_event_device *clk)
> +{
> + struct timer_of *to = to_timer_of(clk);
> +
> + writel_relaxed(event, timer_of_base(to) + FSL_TMR_TMRLR1_OFS);
> + writel_relaxed((FSL_TMR_TMCSR_CSL_DIV2 * FSL_TMR_TMCSR_CSL) |

Same comment here.

> + FSL_TMR_TMCSR_CNTE | FSL_TMR_TMCSR_INTE |
> + FSL_TMR_TMCSR_TRG, timer_of_base(to) +
> + FSL_TMR_TMCSR_OFS);
> + return 0;
> +}
> +
> +static int m10v_config_clock_source(struct timer_of *to)
> +{
> + writel_relaxed(0, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> + writel_relaxed(~0, timer_of_base(to) + FSL_TMR_TMR_OFS);
> + writel_relaxed(~0, timer_of_base(to) + FSL_TMR_TMRLR1_OFS);
> + writel_relaxed(~0, timer_of_base(to) + FSL_TMR_TMRLR2_OFS);
> + writel_relaxed(BIT(4) | BIT(1) | BIT(0), timer_of_base(to) +
> + FSL_TMR_TMCSR_OFS);
> + return 0;
> +}
> +
> +static int m10v_config_clock_event(struct timer_of *to)
> +{
> + writel_relaxed(0, timer_of_base(to) + FSL_TMR_TMCSR_OFS);
> + return 0;
> +}
> +
> +static struct timer_of to = {
> + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
> +
> + .clkevt = {
> + .name = "m10v-clkevt",
> + .rating = M10V_TIMER_RATING,
> + .cpumask = cpu_possible_mask,
> + },
> +
> + .of_irq = {
> + .flags = IRQF_TIMER | IRQF_IRQPOLL,
> + },
> +};
> +
> +static int __init m10v_timer_init(struct device_node *node)
> +{
> + int ret;
> +
> + to.clkevt.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_ONESHOT;
> + to.clkevt.set_state_oneshot = m10v_set_state_oneshot;
> + to.clkevt.set_state_periodic = m10v_set_state_periodic;
> + to.clkevt.set_next_event = m10v_clkevt_next_event;
> + to.of_irq.handler = m10v_timer_interrupt;

Move the initialization in the timer_of structure above.

> + ret = timer_of_init(node, &to);
> + if (ret)
> + goto err;

You should return directly, rollback is done in the timer_of_init().

> +
> + m10v_config_clock_source(&to);
> + clocksource_mmio_init(timer_of_base(&to) + FSL_TMR_TMR_OFS,
> + node->name, timer_of_rate(&to), M10V_TIMER_RATING, 32,
> + clocksource_mmio_readl_down);

May be you can add the sched_clock also ?

> + m10v_config_clock_event(&to);
> + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
> + 15, 0xffffffff);
> +
> + return 0;
> +err:
> + timer_of_cleanup(&to);
> + return ret;
> +}
> +TIMER_OF_DECLARE(m10v_peritimer, "socionext,milbeaut-m10v-timer",
> + m10v_timer_init);
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2018-11-21 11:09    [W:0.305 / U:27.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site