lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type
From
Date
On Wed, 2018-11-21 at 08:21 +0000, Ardelean, Alexandru wrote:
> On Tue, 2018-11-20 at 22:30 +0530, Shreeya Patel wrote:
> > ADT7316 driver no more uses platform data and hence use device tree
> > data instead of platform data for assigning irq_type field.
> > Switch case figures out the type of irq and if it's the default
> > case
> > then assign the default value to the irq_type i.e.
> > irq_type = IRQF_TRIGGER_LOW
> >
>
> 1 comment inline
>
> > Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> > ---
> > drivers/staging/iio/addac/adt7316.c | 21 +++++++++++++++++----
> > 1 file changed, 17 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/iio/addac/adt7316.c
> > b/drivers/staging/iio/addac/adt7316.c
> > index 9c72538baf9e..c647875a64f5 100644
> > --- a/drivers/staging/iio/addac/adt7316.c
> > +++ b/drivers/staging/iio/addac/adt7316.c
> > @@ -2101,8 +2101,7 @@ int adt7316_probe(struct device *dev, struct
> > adt7316_bus *bus,
> > {
> > struct adt7316_chip_info *chip;
> > struct iio_dev *indio_dev;
> > - unsigned short *adt7316_platform_data = dev-
> > >platform_data;
> > - int irq_type = IRQF_TRIGGER_LOW;
> > + int irq_type;
> > int ret = 0;
> >
> > indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
> > @@ -2146,8 +2145,22 @@ int adt7316_probe(struct device *dev, struct
> > adt7316_bus *bus,
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > if (chip->bus.irq > 0) {
> > - if (adt7316_platform_data[0])
> > - irq_type = adt7316_platform_data[0];
> > + irq_type =
> > + irqd_get_trigger_type(irq_get_irq_data(chi
> > p-
> > > bus.irq));
> >
> > +
> > + switch (irq_type) {
> > + case IRQF_TRIGGER_HIGH:
> > + case IRQF_TRIGGER_RISING:
> > + break;
> > + case IRQF_TRIGGER_LOW:
> > + case IRQF_TRIGGER_FALLING:
> > + break;
> > + default:
> > + dev_info(dev, "mode %d unsupported, using
> > IRQF_TRIGGER_LOW\n",
> > + irq_type);
> > + irq_type = IRQF_TRIGGER_LOW;
> > + break;
> > + }
>
> It would be an idea to move this part [together with
> devm_request_threaded_irq()] into a "adt7316_setup_irq()" function.
> To un-
> clutter the code in the adt7316_probe() function.
>

Yes, seems like a good idea!
Even other drivers are doing the same as you told me to do...thanks :)

I'll do the change after Jonathan picks up the other patches and will
wait for some other reviews to come up if there are any.

Thanks

> >
> > ret = devm_request_threaded_irq(dev, chip-
> > >bus.irq,
> > NULL,

\
 
 \ /
  Last update: 2018-11-21 10:33    [W:0.049 / U:3.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site