lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
Date
This patch modifies rcar_gen3_init_otg() procedure to follow Figure
73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
This patch is based on the latest linux-phy / next branch
(commit id = 0eb86fa77f0f0c81631a030f10679a45c05df33a).

drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index d0f412c..a9e53e8 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
void __iomem *usb2_base = ch->base;
u32 val;

+ rcar_gen3_set_linectrl(ch, 0, 1);
+ val = readl(usb2_base + USB2_LINECTRL1);
+ writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
+ usb2_base + USB2_LINECTRL1);
+
val = readl(usb2_base + USB2_VBCTRL);
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
- rcar_gen3_control_otg_irq(ch, 1);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
- val = readl(usb2_base + USB2_LINECTRL1);
- rcar_gen3_set_linectrl(ch, 0, 0);
- writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
- usb2_base + USB2_LINECTRL1);
+
+ msleep(20);
+
+ writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+
+ rcar_gen3_control_otg_irq(ch, 1);

rcar_gen3_device_recognition(ch);
}
--
1.9.1
\
 
 \ /
  Last update: 2018-11-21 09:10    [W:0.112 / U:7.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site