lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] spi: Add Renesas R-Car RPC SPI controller driver
From
Date
On 11/19/2018 11:01 AM, Mason Yang wrote:
> Add a driver for Renesas R-Car D3 RPC SPI controller driver.

The RPC supports both HF and SPI, not just SPI. And it's present in all
of Gen3 , not just D3 .

[...]

> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,750 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
> +// Copyright (C) 2018 Macronix International Co., Ltd.
> +//
> +// R-Car D3 RPC SPI/QSPI/Octa driver
> +//
> +// Authors:
> +// Mason Yang <masonccyang@mxic.com.tw>
> +//

Fix multiline comment please.

> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/spi-mem.h>

[...]

> +#define RPC_CMNSR 0x0048 /* R */
> +#define RPC_CMNSR_SSLF BIT(1)
> +#define RPC_CMNSR_TEND BIT(0)

#define[SPACE] instead of tab

> +#define RPC_DRDMCR 0x0058 /* R/W */
> +#define RPC_DRDRENR 0x005C /* R/W */
> +
> +#define RPC_SMDMCR 0x0060 /* R/W */
> +#define RPC_SMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0)
> +
> +#define RPC_SMDRENR 0x0064 /* R/W */
> +#define RPC_SMDRENR_HYPE (0x5 << 12)
> +#define RPC_SMDRENR_ADDRE BIT(8)
> +#define RPC_SMDRENR_OPDRE BIT(4)
> +#define RPC_SMDRENR_SPIDRE BIT(0)
> +
> +#define RPC_PHYCNT 0x007C /* R/W */
> +#define RPC_PHYCNT_CAL BIT(31)
> +#define PRC_PHYCNT_OCTA_AA BIT(22)
> +#define PRC_PHYCNT_OCTA_SA BIT(23)
> +#define PRC_PHYCNT_EXDS BIT(21)
> +#define RPC_PHYCNT_OCT BIT(20)
> +#define RPC_PHYCNT_STRTIM(v) (((v) & 0x7) << 15)
> +#define RPC_PHYCNT_WBUF2 BIT(4)
> +#define RPC_PHYCNT_WBUF BIT(2)
> +#define RPC_PHYCNT_MEM(v) (((v) & 0x3) << 0)
> +
> +#define RPC_PHYOFFSET1 0x0080 /* R/W */
> +#define RPC_PHYOFFSET2 0x0084 /* R/W */
> +
> +#define RPC_WBUF 0x8000 /* Write Buffer */
> +#define RPC_WBUF_SIZE 256 /* Write Buffer size */
> +
> +struct rpc_spi {
> + struct clk *clk_rpc;
> + void __iomem *regs;
> + struct {
> + void __iomem *map;
> + dma_addr_t dma;
> + size_t size;
> + } linear;

Does this need it's own struct ?

> + u32 cur_speed_hz;
> + u32 cmd;
> + u32 addr;
> + u32 dummy;
> + u32 smcr;
> + u32 smenr;
> + u32 xferlen;
> + u32 totalxferlen;

This register cache might be a good candidate for regmap ?

> + enum spi_mem_data_dir xfer_dir;
> +};
> +
> +static int rpc_spi_set_freq(struct rpc_spi *rpc, unsigned long freq)
> +{
> + int ret;
> +
> + if (rpc->cur_speed_hz == freq)
> + return 0;
> +
> + clk_disable_unprepare(rpc->clk_rpc);
> + ret = clk_set_rate(rpc->clk_rpc, freq);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(rpc->clk_rpc);
> + if (ret)
> + return ret;

Is this clock disable/update/enable really needed ? I'd think that
clk_set_rate() would handle the rate update correctly.

> + rpc->cur_speed_hz = freq;
> + return ret;
> +}
> +
> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
> +{
> + /*
> + * NOTE: The 0x260 are undocumented bits, but they must be set.
> + */

FYI:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/spi/renesas_rpc_spi.c#l207

I think the STRTIM should be 6 .

> + writel(RPC_PHYCNT_CAL | RPC_PHYCNT_STRTIM(0x3) | 0x260,
> + rpc->regs + RPC_PHYCNT);
> +
> + /*
> + * NOTE: The 0x31511144 and 0x431 are undocumented bits,
> + * but they must be set for RPC_PHYOFFSET1 & RPC_PHYOFFSET2.
> + */
> + writel(0x31511144, rpc->regs + RPC_PHYOFFSET1);
> + writel(0x431, rpc->regs + RPC_PHYOFFSET2);
> +
> + writel(RPC_SSLDR_SPNDL(7) | RPC_SSLDR_SLNDL(7) |
> + RPC_SSLDR_SCKDL(7), rpc->regs + RPC_SSLDR);
> +}
> +
> +static int wait_msg_xfer_end(struct rpc_spi *rpc)
> +{
> + u32 sts;
> +
> + return readl_poll_timeout(rpc->regs + RPC_CMNSR, sts,
> + sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
> +}
> +
> +static u8 rpc_bits_xfer(u32 nbytes)
> +{
> + u8 databyte;
> +
> + switch (nbytes) {

Did you ever test unaligned writes and reads ? There are some nasty edge
cases in those.

Also, I think you can calculate the number of set bits using a simple
function, so the switch-case might not even be needed.

> + case 1:
> + databyte = 0x8;
> + break;
> + case 2:
> + databyte = 0xc;
> + break;
> + default:
> + databyte = 0xf;
> + break;
> + }
> +
> + return databyte;
> +}
> +
> +static int rpc_spi_io_xfer(struct rpc_spi *rpc,
> + const void *tx_buf, void *rx_buf)
> +{
> + u32 smenr, smcr, data, pos = 0;
> + int ret = 0;
> +
> + writel(RPC_CMNCR_MD | RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> + RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> + writel(0x0, rpc->regs + RPC_SMDRENR);
> +
> + if (tx_buf) {
> + writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> + writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> + writel(rpc->addr, rpc->regs + RPC_SMADR);
> + smenr = rpc->smenr;
> +
> + while (pos < rpc->xferlen) {
> + u32 nbytes = rpc->xferlen - pos;
> +
> + writel(*(u32 *)(tx_buf + pos), rpc->regs + RPC_SMWDR0);
> +
> + if (nbytes > 4) {
> + nbytes = 4;
> + smcr = rpc->smcr |
> + RPC_SMCR_SPIE | RPC_SMCR_SSLKP;
> + } else {
> + smcr = rpc->smcr | RPC_SMCR_SPIE;
> + }
> +
> + writel(smenr, rpc->regs + RPC_SMENR);
> + writel(smcr, rpc->regs + RPC_SMCR);
> + ret = wait_msg_xfer_end(rpc);
> + if (ret)
> + goto out;
> +
> + pos += nbytes;
> + smenr = rpc->smenr & ~RPC_SMENR_CDE &
> + ~RPC_SMENR_ADE(0xf);
> + }
> + } else if (rx_buf) {
> + while (pos < rpc->xferlen) {
> + u32 nbytes = rpc->xferlen - pos;
> +
> + if (nbytes > 4)
> + nbytes = 4;
> +
> + writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> + writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> + writel(rpc->addr + pos, rpc->regs + RPC_SMADR);
> + writel(rpc->smenr, rpc->regs + RPC_SMENR);
> + writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> + ret = wait_msg_xfer_end(rpc);
> + if (ret)
> + goto out;
> +
> + data = readl(rpc->regs + RPC_SMRDR0);
> + memcpy_fromio(rx_buf + pos, (void *)&data, nbytes);
> + pos += nbytes;
> + }
> + } else {
> + writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> + writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> + writel(rpc->addr + pos, rpc->regs + RPC_SMADR);
> + writel(rpc->smenr, rpc->regs + RPC_SMENR);
> + writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> + ret = wait_msg_xfer_end(rpc);
> + }
> +out:

Dont you need to stop the RPC somehow in case the transmission fails ?

> + return ret;
> +}
> +
> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> + const struct spi_mem_op *op,
> + u64 *offs, size_t *len)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(spi->master);
> +
> + rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
> + rpc->smenr = RPC_SMENR_CDE |
> + RPC_SMENR_CDB(fls(op->cmd.buswidth >> 1));
> + rpc->totalxferlen = 1;
> + rpc->xferlen = 0;
> + rpc->addr = 0;
> +
> + if (op->addr.nbytes) {
> + rpc->smenr |= RPC_SMENR_ADB(fls(op->addr.buswidth >> 1));
> + if (op->addr.nbytes == 4)
> + rpc->smenr |= RPC_SMENR_ADE(0xf);
> + else
> + rpc->smenr |= RPC_SMENR_ADE(0x7);
> +
> + if (!offs && !len)
> + rpc->addr = *(u32 *)offs;

How does this work ? Shouldn't this be just *offs to dereference the
pointer ?

> + else
> + rpc->addr = op->addr.val;
> + rpc->totalxferlen += op->addr.nbytes;
> + }
> +
> + if (op->dummy.nbytes) {
> + rpc->smenr |= RPC_SMENR_DME;
> + rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
> + rpc->totalxferlen += op->dummy.nbytes;
> + }
> +
> + if (op->data.nbytes || (offs && len)) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer(op->data.nbytes)) |
> + RPC_SMENR_SPIDB(fls(op->data.buswidth >> 1));
> +
> + if (op->data.dir == SPI_MEM_DATA_IN) {
> + rpc->smcr = RPC_SMCR_SPIRE;
> + rpc->xfer_dir = SPI_MEM_DATA_IN;
> + } else if (op->data.dir == SPI_MEM_DATA_OUT) {
> + rpc->smcr = RPC_SMCR_SPIWE;
> + rpc->xfer_dir = SPI_MEM_DATA_OUT;
> + }
> +
> + if (offs && len) {
> + rpc->xferlen = *(u32 *)len;
> + rpc->totalxferlen += *(u32 *)len;
> + } else {
> + rpc->xferlen = op->data.nbytes;
> + rpc->totalxferlen += op->data.nbytes;
> + }
> + }
> +}
> +
> +static bool rpc_spi_mem_supports_op(struct spi_mem *mem,
> + const struct spi_mem_op *op)
> +{
> + if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
> + op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
> + return false;
> +
> + if (op->addr.nbytes > 4)
> + return false;
> +
> + return true;
> +}
> +
> +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
> + u64 offs, size_t len, void *buf)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> + int ret;
> +
> + if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
> + return -EINVAL;
> +
> + ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> + if (ret)
> + return ret;
> +
> + rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> + &desc->info.op_tmpl, &offs, &len);
> +
> + writel(RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> + RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> +
> + writel(RPC_DRCR_RBURST(0x1f) | RPC_DRCR_RBE, rpc->regs + RPC_DRCR);
> + writel(rpc->cmd, rpc->regs + RPC_DRCMR);
> + writel(RPC_DREAR_EAC, rpc->regs + RPC_DREAR);
> + writel(0, rpc->regs + RPC_DROPR);
> + writel(rpc->smenr, rpc->regs + RPC_DRENR);
> + writel(rpc->dummy, rpc->regs + RPC_DRDMCR);
> + writel(0x0, rpc->regs + RPC_DRDRENR);
> + memcpy_fromio(buf, rpc->linear.map + desc->info.offset + offs, len);
> +
> + return len;
> +}
> +
> +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
> + u64 offs, size_t len, const void *buf)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> + int tx_offs, ret;
> +
> + if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
> + return -EINVAL;
> +
> + if (WARN_ON(len > RPC_WBUF_SIZE))
> + return -EIO;
> +
> + ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> + if (ret)
> + return ret;
> +
> + rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> + &desc->info.op_tmpl, &offs, &len);
> +
> + writel(RPC_CMNCR_MD | RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> + RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> + writel(0x0, rpc->regs + RPC_SMDRENR);
> +
> + writel(RPC_PHYCNT_CAL | 0x260 | RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
> + rpc->regs + RPC_PHYCNT);
> +
> + for (tx_offs = 0; tx_offs < RPC_WBUF_SIZE; tx_offs += 4)
> + writel(*(u32 *)(buf + tx_offs), rpc->regs + RPC_WBUF + tx_offs);

Isn't this some memcpy_toio() or iowrite32_rep() reimplementation here ?

> + writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> + writel(offs, rpc->regs + RPC_SMADR);
> + writel(rpc->smenr, rpc->regs + RPC_SMENR);
> + writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> + ret = wait_msg_xfer_end(rpc);
> + if (ret)
> + goto out;
> +
> + writel(RPC_DRCR_RCF, rpc->regs + RPC_DRCR);
> + writel(RPC_PHYCNT_CAL | RPC_PHYCNT_STRTIM(0) | 0x260,
> + rpc->regs + RPC_PHYCNT);
> +
> + return len;
> +out:

Shouldn't you shut the controller down if the xfer fails ?

> + return ret;
> +}
> +
> +static int rpc_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> +
> + if (desc->info.offset + desc->info.length > U32_MAX)
> + return -ENOTSUPP;
> +
> + if (!rpc_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
> + return -ENOTSUPP;
> +
> + if (!rpc->linear.map &&
> + desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
> + return -ENOTSUPP;
> +
> + return 0;
> +}
> +
> +static int rpc_spi_mem_exec_op(struct spi_mem *mem,
> + const struct spi_mem_op *op)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(mem->spi->master);
> + int ret;
> +
> + ret = rpc_spi_set_freq(rpc, mem->spi->max_speed_hz);
> + if (ret)
> + return ret;
> +
> + rpc_spi_mem_set_prep_op_cfg(mem->spi, op, NULL, NULL);
> +
> + ret = rpc_spi_io_xfer(rpc,
> + op->data.dir == SPI_MEM_DATA_OUT ?
> + op->data.buf.out : NULL,
> + op->data.dir == SPI_MEM_DATA_IN ?
> + op->data.buf.in : NULL);
> +
> + return ret;
> +}
> +
> +static const struct spi_controller_mem_ops rpc_spi_mem_ops = {
> + .supports_op = rpc_spi_mem_supports_op,
> + .exec_op = rpc_spi_mem_exec_op,
> + .dirmap_create = rpc_spi_mem_dirmap_create,
> + .dirmap_read = rpc_spi_mem_dirmap_read,
> + .dirmap_write = rpc_spi_mem_dirmap_write,
> +};
> +
> +static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
> + struct spi_message *msg)
> +{
> + struct spi_transfer *t, xfer[4] = { };
> + u32 i, xfercnt, xferpos = 0;
> +
> + rpc->totalxferlen = 0;
> + list_for_each_entry(t, &msg->transfers, transfer_list) {
> + if (t->tx_buf) {
> + xfer[xferpos].tx_buf = t->tx_buf;
> + xfer[xferpos].tx_nbits = t->tx_nbits;
> + }
> +
> + if (t->rx_buf) {
> + xfer[xferpos].rx_buf = t->rx_buf;
> + xfer[xferpos].rx_nbits = t->rx_nbits;
> + }
> +
> + if (t->len) {
> + xfer[xferpos++].len = t->len;
> + rpc->totalxferlen += t->len;
> + }
> + }
> +
> + xfercnt = xferpos;
> + rpc->xferlen = xfer[--xferpos].len;
> + rpc->cmd = RPC_SMCMR_CMD(((u8 *)xfer[0].tx_buf)[0]);

Is the cast needed ?

> + rpc->smenr = RPC_SMENR_CDE | RPC_SMENR_CDB(fls(xfer[0].tx_nbits >> 1));
> + rpc->addr = 0;
> +
> + if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
> + rpc->smenr |= RPC_SMENR_ADB(fls(xfer[1].tx_nbits >> 1));
> + for (i = 0; i < xfer[1].len; i++)
> + rpc->addr |= (u32)((u8 *)xfer[1].tx_buf)[i]
> + << (8 * (xfer[1].len - i - 1));
> +
> + if (xfer[1].len == 4)
> + rpc->smenr |= RPC_SMENR_ADE(0xf);
> + else
> + rpc->smenr |= RPC_SMENR_ADE(0x7);
> + }
> +
> + switch (xfercnt) {
> + case 2:
> + if (xfer[1].rx_buf) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> + (xfer[1].len)) | RPC_SMENR_SPIDB(fls
> + (xfer[1].rx_nbits >> 1));

How much of this register value calculation could be somehow
deduplicated ? It seems to be almost the same thing copied thrice here.

> + rpc->smcr = RPC_SMCR_SPIRE;
> + rpc->xfer_dir = SPI_MEM_DATA_IN;
> + } else if (xfer[1].tx_buf) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> + (xfer[1].len)) | RPC_SMENR_SPIDB(fls
> + (xfer[1].tx_nbits >> 1));
> + rpc->smcr = RPC_SMCR_SPIWE;
> + rpc->xfer_dir = SPI_MEM_DATA_OUT;
> + }
> + break;
> +
> + case 3:
> + if (xfer[2].len && xfer[2].rx_buf && !xfer[2].tx_buf) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> + (xfer[2].len)) | RPC_SMENR_SPIDB(fls
> + (xfer[2].rx_nbits >> 1));
> + rpc->smcr = RPC_SMCR_SPIRE;
> + rpc->xfer_dir = SPI_MEM_DATA_IN;
> + } else if (xfer[2].len && xfer[2].tx_buf && !xfer[2].rx_buf) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> + (xfer[2].len)) | RPC_SMENR_SPIDB(fls
> + (xfer[2].tx_nbits >> 1));
> + rpc->smcr = RPC_SMCR_SPIWE;
> + rpc->xfer_dir = SPI_MEM_DATA_OUT;
> + }
> +
> + break;
> +
> + case 4:
> + if (xfer[2].len && xfer[2].tx_buf) {
> + rpc->smenr |= RPC_SMENR_DME;
> + rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
> + writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> + }
> +
> + if (xfer[3].len && xfer[3].rx_buf) {
> + rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> + (xfer[3].len)) | RPC_SMENR_SPIDB(fls
> + (xfer[3].rx_nbits >> 1));
> + rpc->smcr = RPC_SMCR_SPIRE;
> + rpc->xfer_dir = SPI_MEM_DATA_IN;
> + }
> +
> + break;
> +
> + default:
> + break;
> + }
> +}
> +
> +static int rpc_spi_xfer_message(struct rpc_spi *rpc, struct spi_transfer *t)
> +{
> + int ret;
> +
> + ret = rpc_spi_set_freq(rpc, t->speed_hz);
> + if (ret)
> + return ret;
> +
> + ret = rpc_spi_io_xfer(rpc,
> + rpc->xfer_dir == SPI_MEM_DATA_OUT ?
> + t->tx_buf : NULL,
> + rpc->xfer_dir == SPI_MEM_DATA_IN ?
> + t->rx_buf : NULL);
> +
> + return ret;
> +}
> +
> +static int rpc_spi_transfer_one_message(struct spi_master *master,
> + struct spi_message *msg)
> +{
> + struct rpc_spi *rpc = spi_master_get_devdata(master);
> + struct spi_transfer *t;
> + int ret;
> +
> + rpc_spi_transfer_setup(rpc, msg);
> +
> + list_for_each_entry(t, &msg->transfers, transfer_list) {
> + if (list_is_last(&t->transfer_list, &msg->transfers)) {

if (!list...)
continue;

to reduce the indent level.

> + ret = rpc_spi_xfer_message(rpc, t);
> + if (ret)
> + goto out;
> + }
> + }
> +
> + msg->status = 0;
> + msg->actual_length = rpc->totalxferlen;
> +out:
> + spi_finalize_current_message(master);
> + return 0;
> +}
> +
> +static int __maybe_unused rpc_spi_runtime_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct spi_master *master = platform_get_drvdata(pdev);
> + struct rpc_spi *rpc = spi_master_get_devdata(master);
> +
> + clk_disable_unprepare(rpc->clk_rpc);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused rpc_spi_runtime_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct spi_master *master = platform_get_drvdata(pdev);
> + struct rpc_spi *rpc = spi_master_get_devdata(master);
> + int ret;
> +
> + ret = clk_prepare_enable(rpc->clk_rpc);
> + if (ret)
> + dev_err(dev, "Can't enable rpc->clk_rpc\n");
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops rpc_spi_dev_pm_ops = {
> + SET_RUNTIME_PM_OPS(rpc_spi_runtime_suspend,
> + rpc_spi_runtime_resume, NULL)
> +};
> +
> +static int rpc_spi_probe(struct platform_device *pdev)
> +{
> + struct spi_master *master;
> + struct resource *res;
> + struct rpc_spi *rpc;
> + int ret;
> +
> + master = spi_alloc_master(&pdev->dev, sizeof(struct rpc_spi));
> + if (!master)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, master);
> +
> + rpc = spi_master_get_devdata(master);
> +
> + master->dev.of_node = pdev->dev.of_node;
> +
> + rpc->clk_rpc = devm_clk_get(&pdev->dev, "clk_rpc");
> + if (IS_ERR(rpc->clk_rpc))
> + return PTR_ERR(rpc->clk_rpc);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rpc_regs");
> + rpc->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(rpc->regs))
> + return PTR_ERR(rpc->regs);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
> + rpc->linear.map = devm_ioremap_resource(&pdev->dev, res);
> + if (!IS_ERR(rpc->linear.map)) {
> + rpc->linear.dma = res->start;
> + rpc->linear.size = resource_size(res);
> + } else {
> + rpc->linear.map = NULL;
> + }
> +
> + pm_runtime_enable(&pdev->dev);
> + master->auto_runtime_pm = true;
> +
> + master->num_chipselect = 1;
> + master->mem_ops = &rpc_spi_mem_ops;
> + master->transfer_one_message = rpc_spi_transfer_one_message;
> +
> + master->bits_per_word_mask = SPI_BPW_MASK(8);
> + master->mode_bits = SPI_CPOL | SPI_CPHA |
> + SPI_RX_DUAL | SPI_TX_DUAL |
> + SPI_RX_QUAD | SPI_TX_QUAD;
> +
> + rpc_spi_hw_init(rpc);
> +
> + ret = spi_register_master(master);
> + if (ret) {
> + dev_err(&pdev->dev, "spi_register_master failed\n");
> + goto err_put_master;
> + }
> + return 0;
> +
> +err_put_master:
> + spi_master_put(master);
> + pm_runtime_disable(&pdev->dev);
> +
> + return ret;
> +}
> +
> +static int rpc_spi_remove(struct platform_device *pdev)
> +{
> + struct spi_master *master = platform_get_drvdata(pdev);
> +
> + pm_runtime_disable(&pdev->dev);
> + spi_unregister_master(master);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rpc_spi_of_ids[] = {
> + { .compatible = "renesas,rpc-r8a77995", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);
> +
> +static struct platform_driver rpc_spi_driver = {
> + .probe = rpc_spi_probe,
> + .remove = rpc_spi_remove,
> + .driver = {
> + .name = "rpc-spi",
> + .of_match_table = rpc_spi_of_ids,
> + .pm = &rpc_spi_dev_pm_ops,
> + },
> +};
> +module_platform_driver(rpc_spi_driver);
> +
> +MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
> +MODULE_DESCRIPTION("Renesas R-Car D3 RPC SPI controller driver");

This is not D3 specific and not SPI-only controller btw.

> +MODULE_LICENSE("GPL v2");
>


--
Best regards,
Marek Vasut

\
 
 \ /
  Last update: 2018-11-19 15:14    [W:0.156 / U:7.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site