lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] mfd: stmpe: Move ADC related defines to header of mfd
On 19.11.2018 11:25, Philippe Schenker wrote:
> Move defines that are ADC related to the header of the overlying mfd,
> so they can be used from multiple sub-devices.

Looks good to me:

Reviewed-by: Stefan Agner <stefan@agner.ch>

>
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
>
> Changes in v2:
> - This is a new added commit. Separate commit for moving the defines out of
> drivers/input/touchscreen/stmpe-ts.c to overlying mfd-device
> drivers/mfd/stmpe.c
> - Pre-fix defines with STMPE_
>
> drivers/input/touchscreen/stmpe-ts.c | 34 +++++++++++-----------------
> include/linux/mfd/stmpe.h | 11 +++++++++
> 2 files changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/input/touchscreen/stmpe-ts.c
> b/drivers/input/touchscreen/stmpe-ts.c
> index 2a78e27b4495..c5d9006588a2 100644
> --- a/drivers/input/touchscreen/stmpe-ts.c
> +++ b/drivers/input/touchscreen/stmpe-ts.c
> @@ -49,17 +49,6 @@
>
> #define STMPE_IRQ_TOUCH_DET 0
>
> -#define SAMPLE_TIME(x) ((x & 0xf) << 4)
> -#define MOD_12B(x) ((x & 0x1) << 3)
> -#define REF_SEL(x) ((x & 0x1) << 1)
> -#define ADC_FREQ(x) (x & 0x3)
> -#define AVE_CTRL(x) ((x & 0x3) << 6)
> -#define DET_DELAY(x) ((x & 0x7) << 3)
> -#define SETTLING(x) (x & 0x7)
> -#define FRACTION_Z(x) (x & 0x7)
> -#define I_DRIVE(x) (x & 0x1)
> -#define OP_MODE(x) ((x & 0x7) << 1)
> -
> #define STMPE_TS_NAME "stmpe-ts"
> #define XY_MASK 0xfff
>
> @@ -213,9 +202,10 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
> return ret;
> }
>
> - adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) |
> - REF_SEL(ts->ref_sel);
> - adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff);
> + adc_ctrl1 = STMPE_SAMPLE_TIME(ts->sample_time) |
> + STMPE_MOD_12B(ts->mod_12b) | STMPE_REF_SEL(ts->ref_sel);
> + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
> + STMPE_REF_SEL(0xff);
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1,
> adc_ctrl1_mask, adc_ctrl1);
> @@ -225,15 +215,17 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
> }
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2,
> - ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq));
> + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(ts->adc_freq));
> if (ret) {
> dev_err(dev, "Could not setup ADC\n");
> return ret;
> }
>
> - tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) |
> - SETTLING(ts->settling);
> - tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff);
> + tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) |
> + STMPE_DET_DELAY(ts->touch_det_delay) |
> + STMPE_SETTLING(ts->settling);
> + tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) |
> + STMPE_SETTLING(0xff);
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg);
> if (ret) {
> @@ -242,14 +234,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
> }
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z,
> - FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z));
> + STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z));
> if (ret) {
> dev_err(dev, "Could not config touch\n");
> return ret;
> }
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE,
> - I_DRIVE(0xff), I_DRIVE(ts->i_drive));
> + STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive));
> if (ret) {
> dev_err(dev, "Could not config touch\n");
> return ret;
> @@ -263,7 +255,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
> }
>
> ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL,
> - OP_MODE(0xff), OP_MODE(OP_MOD_XYZ));
> + STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ));
> if (ret) {
> dev_err(dev, "Could not set mode\n");
> return ret;
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index 4a827af17e59..c0353f6431f9 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -10,6 +10,17 @@
>
> #include <linux/mutex.h>
>
> +#define STMPE_SAMPLE_TIME(x) ((x & 0xf) << 4)
> +#define STMPE_MOD_12B(x) ((x & 0x1) << 3)
> +#define STMPE_REF_SEL(x) ((x & 0x1) << 1)
> +#define STMPE_ADC_FREQ(x) (x & 0x3)
> +#define STMPE_AVE_CTRL(x) ((x & 0x3) << 6)
> +#define STMPE_DET_DELAY(x) ((x & 0x7) << 3)
> +#define STMPE_SETTLING(x) (x & 0x7)
> +#define STMPE_FRACTION_Z(x) (x & 0x7)
> +#define STMPE_I_DRIVE(x) (x & 0x1)
> +#define STMPE_OP_MODE(x) ((x & 0x7) << 1)
> +
> struct device;
> struct regulator;

\
 
 \ /
  Last update: 2018-11-19 14:33    [W:0.100 / U:3.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site