lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs
Date
It's based on a downstream driver from Sriharsha Allenki <sallenki@codeaurora.org>
that uses USB phy framework, and gets rewrote to adpot generic phy
framework together with quite some cleanups.

Changes for v4:
- Kill device tree property 'qcom,init-seq' by moving the settings
into phy driver as device match data.

Changes for v3:
- Use SoC specific compatible "qcom,qcs404-usb-hsphy".
- Use OF graph instead of extcon bindings to model the link to USB
connector.

Changes for v2:
- Add a pointer to phy/phy-bindings.txt for property #phy-cells.
- Roll back voltage settings in case function
qcom_snps_hsphy_config_regulators() fails in the middle.
- Add a comment for init-seq tuple which consists of 3 numbers.
- Sort include headers alphabetically.
- Sort register definitions in order of offset.

Shawn Guo (1):
phy: qualcomm: Add Synopsys High-Speed USB PHY driver

Sriharsha Allenki (1):
dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding

.../phy/qcom,snps-28nm-usb-hs-phy.txt | 87 +++
drivers/phy/qualcomm/Kconfig | 10 +
drivers/phy/qualcomm/Makefile | 1 +
.../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 535 ++++++++++++++++++
4 files changed, 633 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt
create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c

--
2.18.0

\
 
 \ /
  Last update: 2018-11-19 12:10    [W:0.053 / U:9.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site