lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-binding: spi: Document Renesas R-Car RPC controller bindings
Date
Document the bindings used by the Renesas R-Car D3 RPC controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
.../devicetree/bindings/spi/spi-renesas-rpc.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..8286cc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,33 @@
+Renesas R-Car D3 RPC controller Device Tree Bindings
+----------------------------------------------------
+
+Required properties:
+- compatible: should be "renesas,rpc-r8a77995"
+- #address-cells: should be 1
+- #size-cells: should be 0
+- reg: should contain 2 entries, one for the registers and one for the direct
+ mapping area
+- reg-names: should contain "rpc_regs" and "dirmap"
+- interrupts: interrupt line connected to the RPC SPI controller
+- clock-names: should contain "clk_rpc"
+- clocks: should contain 1 entries for the CPG Module 917 clocks
+
+Example:
+
+ rpc: spi@ee200000 {
+ compatible = "renesas,rpc-r8a77995";
+ reg = <0 0xee200000 0 0x8100>, <0 0x08000000 0 0x4000000>;
+ reg-names = "rpc_regs", "dirmap";
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "clk_rpc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+ };
--
1.9.1
\
 
 \ /
  Last update: 2018-11-19 11:03    [W:0.237 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site