lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
From
Date
On 17/11/2018 18:05, Nishanth Menon wrote:
> On 11:31-20181113, Vignesh R wrote:
>> The dt-bindings header for TI K3 AM6 SoCs define a set of macros for
>> defining pinmux configs in human readable form, instead of raw-coded
>> hex values.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
>> MAINTAINERS | 1 +
>> include/dt-bindings/pinctrl/k3.h | 35 ++++++++++++++++++++++++++++++++
>> 2 files changed, 36 insertions(+)
>> create mode 100644 include/dt-bindings/pinctrl/k3.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index fa45ff36fde9..1574ad6d7ead 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2204,6 +2204,7 @@ S: Supported
>> F: Documentation/devicetree/bindings/arm/ti/k3.txt
>> F: arch/arm64/boot/dts/ti/Makefile
>> F: arch/arm64/boot/dts/ti/k3-*
>> +F: include/dt-bindings/pinctrl/k3.h
>>
>> ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
>> M: Santosh Shilimkar <ssantosh@kernel.org>
>> diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
>> new file mode 100644
>> index 000000000000..463d845a9b36
>> --- /dev/null
>> +++ b/include/dt-bindings/pinctrl/k3.h
>> @@ -0,0 +1,35 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * This header provides constants for pinctrl bindings for TI's K3 SoC
>> + * family.
>> + *
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
>> +#define _DT_BINDINGS_PINCTRL_TI_K3_H
>> +
>> +#define PULLUDEN_SHIFT (16)
>> +#define PULLTYPESEL_SHIFT (17)
>> +#define RXACTIVE_SHIFT (18)
>> +
>> +#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
>> +#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
>> +
>> +#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
>> +#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
>> +
>> +#define INPUT_EN (1 << RXACTIVE_SHIFT)
>> +#define INPUT_DISABLE (0 << RXACTIVE_SHIFT)
>> +
>> +/* Only these macros are expected be used directly in device tree files */
>> +#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE)
>> +#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP)
>> +#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN)
>> +#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
>> +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
>> +#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
>
>
> Thanks for reducing the combinations down to the minimum needed. We can
> worry about the DS and isolation bits when we have a real user for them.
>
> Acked-by: Nishanth Menon <nm@ti.com>
>
> Tero: v4.21-rc1 perhaps ?
>

Yeah, looks fine, queueing up for 4.21.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-11-19 08:21    [W:0.128 / U:4.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site