lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 11/11] soc: mediatek: Add MT8183 scpsys support
From
Date
On Tue, 2018-11-13 at 11:35 -0800, Nicolas Boichat wrote:
> On Mon, Nov 5, 2018 at 10:43 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
> >
> > Add scpsys driver for MT8183
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 226 ++++++++++++++++++++++++++++++
> > 1 file changed, 226 insertions(+)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 80be2e05e4e0..57b9f04a69de 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -29,6 +29,7 @@
> > #include <dt-bindings/power/mt7622-power.h>
> > #include <dt-bindings/power/mt7623a-power.h>
> > #include <dt-bindings/power/mt8173-power.h>
> > +#include <dt-bindings/power/mt8183-power.h>
> >
> > #define MTK_POLL_DELAY_US 10
> > #define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> > @@ -1179,6 +1180,217 @@ static const struct scp_subdomain scp_subdomain_mt8173[] = {
> > {MT8173_POWER_DOMAIN_MFG_2D, MT8173_POWER_DOMAIN_MFG},
> > };
> >
> > +/*
> > + * MT8183 power domain support
> > + */
> > +
> > +static const struct scp_domain_data scp_domain_data_mt8183[] = {
> > + [MT8183_POWER_DOMAIN_AUDIO] = {
> > + .name = "audio",
> > + .sta_mask = PWR_STATUS_AUDIO,
> > + .ctl_offs = 0x0314,
> > + .sram_pdn_bits = GENMASK(11, 8),
> > + .sram_pdn_ack_bits = GENMASK(15, 12),
> > + .basic_clk_name = {"audio"},
> > + },
> > + [MT8183_POWER_DOMAIN_CONN] = {
> > + .name = "conn",
> > + .sta_mask = PWR_STATUS_CONN,
> > + .ctl_offs = 0x032c,
> > + .sram_pdn_bits = 0,
> > + .sram_pdn_ack_bits = 0,
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
> > + BIT(13) | BIT(14), BIT(13) | BIT(14)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_MFG_ASYNC] = {
> > + .name = "mfg_async",
> > + .sta_mask = PWR_STATUS_MFG_ASYNC,
> > + .ctl_offs = 0x0334,
> > + .sram_pdn_bits = 0,
> > + .sram_pdn_ack_bits = 0,
> > + .basic_clk_name = {"mfg"},
> > + },
> > + [MT8183_POWER_DOMAIN_MFG] = {
> > + .name = "mfg",
> > + .sta_mask = PWR_STATUS_MFG,
> > + .ctl_offs = 0x0338,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + },
> > + [MT8183_POWER_DOMAIN_MFG_CORE0] = {
> > + .name = "mfg_core0",
> > + .sta_mask = BIT(7),
> > + .ctl_offs = 0x034c,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + },
> > + [MT8183_POWER_DOMAIN_MFG_CORE1] = {
> > + .name = "mfg_core1",
> > + .sta_mask = BIT(20),
> > + .ctl_offs = 0x0310,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + },
> > + [MT8183_POWER_DOMAIN_MFG_2D] = {
> > + .name = "mfg_2d",
> > + .sta_mask = PWR_STATUS_MFG_2D,
> > + .ctl_offs = 0x0348,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2a8, 0x2ac, 0, 0x258,
> > + BIT(19) | BIT(20) | BIT(21),
> > + BIT(19) | BIT(20) | BIT(21)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
> > + BIT(21) | BIT(22), BIT(21) | BIT(22)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_DISP] = {
> > + .name = "disp",
> > + .sta_mask = PWR_STATUS_DISP,
> > + .ctl_offs = 0x030c,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + .basic_clk_name = {"mm"},
> > + .subsys_clk_prefix = "mm",
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2a8, 0x2ac, 0, 0x258,
> > + BIT(16) | BIT(17), BIT(16) | BIT(17)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
> > + BIT(10) | BIT(11), BIT(10) | BIT(11)),
> > + [2] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + GENMASK(7, 0), GENMASK(7, 0)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_CAM] = {
> > + .name = "cam",
> > + .sta_mask = BIT(25),
> > + .ctl_offs = 0x0344,
> > + .sram_pdn_bits = GENMASK(9, 8),
> > + .sram_pdn_ack_bits = GENMASK(13, 12),
> > + .basic_clk_name = {"cam"},
> > + .subsys_clk_prefix = "cam",
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + BIT(4) | BIT(5) | BIT(9) | BIT(13),
> > + BIT(4) | BIT(5) | BIT(9) | BIT(13)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
> > + BIT(28), BIT(28)),
> > + [2] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + BIT(11), 0),
> > + [3] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + BIT(3) | BIT(4), BIT(3) | BIT(4)),
>
> Why do you need to specify the indexes ([0], [1], ...)? Can you just
> use automatic indexes? (especially considering that your code assumes
> there is no gap in the bp_table entries.
>
Indeed, there's no gap in the bp_table. I'll fix it up in next version
and resend. Thanks.
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_ISP] = {
> > + .name = "isp",
> > + .sta_mask = PWR_STATUS_ISP,
> > + .ctl_offs = 0x0308,
> > + .sram_pdn_bits = GENMASK(9, 8),
> > + .sram_pdn_ack_bits = GENMASK(13, 12),
> > + .basic_clk_name = {"isp"},
> > + .subsys_clk_prefix = "isp",
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + BIT(3) | BIT(8), BIT(3) | BIT(8)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + BIT(10), 0),
> > + [2] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + BIT(2), BIT(2)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_VDEC] = {
> > + .name = "vdec",
> > + .sta_mask = BIT(31),
> > + .ctl_offs = 0x0300,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + .bp_table = {
> > + [0] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + BIT(7), BIT(7)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_VENC] = {
> > + .name = "venc",
> > + .sta_mask = PWR_STATUS_VENC,
> > + .ctl_offs = 0x0304,
> > + .sram_pdn_bits = GENMASK(11, 8),
> > + .sram_pdn_ack_bits = GENMASK(15, 12),
> > + .bp_table = {
> > + [0] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + BIT(1), BIT(1)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_VPU_TOP] = {
> > + .name = "vpu_top",
> > + .sta_mask = BIT(26),
> > + .ctl_offs = 0x0324,
> > + .sram_pdn_bits = GENMASK(8, 8),
> > + .sram_pdn_ack_bits = GENMASK(12, 12),
> > + .basic_clk_name = {"vpu", "vpu1"},
> > + .subsys_clk_prefix = "vpu",
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + GENMASK(9, 6) | BIT(12),
> > + GENMASK(9, 6) | BIT(12)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
> > + BIT(27), BIT(27)),
> > + [2] = BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
> > + BIT(10) | BIT(11), BIT(10) | BIT(11)),
> > + [3] = BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
> > + BIT(5) | BIT(6), BIT(5) | BIT(6)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_VPU_CORE0] = {
> > + .name = "vpu_core0",
> > + .sta_mask = BIT(27),
> > + .ctl_offs = 0x33c,
> > + .sram_iso_ctrl = true,
> > + .sram_pdn_bits = GENMASK(11, 8),
> > + .sram_pdn_ack_bits = GENMASK(13, 12),
> > + .basic_clk_name = {"vpu2"},
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
> > + BIT(6), BIT(6)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
> > + BIT(0) | BIT(2) | BIT(4),
> > + BIT(0) | BIT(2) | BIT(4)),
> > + },
> > + },
> > + [MT8183_POWER_DOMAIN_VPU_CORE1] = {
> > + .name = "vpu_core1",
> > + .sta_mask = BIT(28),
> > + .ctl_offs = 0x0340,
> > + .sram_iso_ctrl = true,
> > + .sram_pdn_bits = GENMASK(11, 8),
> > + .sram_pdn_ack_bits = GENMASK(13, 12),
> > + .basic_clk_name = {"vpu3"},
> > + .bp_table = {
> > + [0] = BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
> > + BIT(7), BIT(7)),
> > + [1] = BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
> > + BIT(1) | BIT(3) | BIT(5),
> > + BIT(1) | BIT(3) | BIT(5)),
> > + },
> > + },
> > +};
> > +
> > +static const struct scp_subdomain scp_subdomain_mt8183[] = {
> > + {MT8183_POWER_DOMAIN_MFG_ASYNC, MT8183_POWER_DOMAIN_MFG},
> > + {MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_2D},
> > + {MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_CORE0},
> > + {MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_CORE1},
> > + {MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_CAM},
> > + {MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_ISP},
> > + {MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VDEC},
> > + {MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VENC},
> > + {MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VPU_TOP},
> > + {MT8183_POWER_DOMAIN_VPU_TOP, MT8183_POWER_DOMAIN_VPU_CORE0},
> > + {MT8183_POWER_DOMAIN_VPU_TOP, MT8183_POWER_DOMAIN_VPU_CORE1},
> > +};
> > +
> > static const struct scp_soc_data mt2701_data = {
> > .domains = scp_domain_data_mt2701,
> > .num_domains = ARRAY_SIZE(scp_domain_data_mt2701),
> > @@ -1245,6 +1457,17 @@ static const struct scp_soc_data mt8173_data = {
> > .bus_prot_reg_update = true,
> > };
> >
> > +static const struct scp_soc_data mt8183_data = {
> > + .domains = scp_domain_data_mt8183,
> > + .num_domains = ARRAY_SIZE(scp_domain_data_mt8183),
> > + .subdomains = scp_subdomain_mt8183,
> > + .num_subdomains = ARRAY_SIZE(scp_subdomain_mt8183),
> > + .regs = {
> > + .pwr_sta_offs = 0x0180,
> > + .pwr_sta2nd_offs = 0x0184
> > + }
> > +};
> > +
> > /*
> > * scpsys driver init
> > */
> > @@ -1268,6 +1491,9 @@ static const struct of_device_id of_scpsys_match_tbl[] = {
> > }, {
> > .compatible = "mediatek,mt8173-scpsys",
> > .data = &mt8173_data,
> > + }, {
> > + .compatible = "mediatek,mt8183-scpsys",
> > + .data = &mt8183_data,
> > }, {
> > /* sentinel */
> > }
> > --
> > 2.18.0
> >


\
 
 \ /
  Last update: 2018-11-19 04:59    [W:0.083 / U:4.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site