lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/14] dt-bindings: serial: Add Milbeaut M10V serial description
Date
Add DT bindings document for Milbeaut M10V serial.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
---
.../devicetree/bindings/serial/milbeaut-uart.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..19d1480
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,23 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- index: must be 0
+- compatible: should be "socionext,milbeaut-m10v-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- clocks: phandle to the input clock.
+- interrupt-names: should be "rx", "tx".
+
+Optional properties:
+- uart-flow-enable: flow control enable.
+
+Example:
+ usio1: usio_uart@1e700010 {
+ index = <0>;
+ compatible = "socionext,milbeaut-m10v-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&hclk>;
+ uart-flow-enable;
+ };
--
1.9.1
\
 
 \ /
  Last update: 2018-11-19 02:02    [W:0.327 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site