lkml.org 
[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode
Date
Setting up burst mode display would require to compute
- Horizontal timing edge values to fill burst drq register
- Line, sync values to fill burst line register

Since there is no direct documentation for these computations
the edge and line formulas are taken from BSP code (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

line_num = panel->lcd_ht*dsi_pixel_bits[panel->lcd_dsi_format]/
(8*panel->lcd_dsi_lane);
edge1 = sync_point+(panel->lcd_x+panel->lcd_hbp+20)*
dsi_pixel_bits[panel->lcd_dsi_format] /(8*panel->lcd_dsi_lane);
edge1 = (edge1>line_num)?line_num:edge1;
edge0 = edge1+(panel->lcd_x+40)*tcon_div/8;
edge0 = (edge0>line_num)?(edge0-line_num):1;

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 72 ++++++++++++++++++++++++--
1 file changed, 68 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 66a01061e51d..0182408f8932 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -364,6 +364,41 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi,
SUN6I_DSI_INST_JUMP_CFG_NUM(1));
};

+static u32 sun6i_dsi_get_edge1(struct sun6i_dsi *dsi,
+ struct drm_display_mode *mode, u32 sync_point)
+{
+ struct mipi_dsi_device *device = dsi->device;
+ unsigned int bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+ u32 hact_sync_bp;
+
+ /* Horizontal timings duration excluding front porch */
+ hact_sync_bp = (mode->hdisplay + mode->htotal - mode->hsync_start);
+
+ return (sync_point + ((hact_sync_bp + 20) * bpp / (8 * device->lanes)));
+}
+
+static u32 sun6i_dsi_get_edge0(struct sun6i_dsi *dsi,
+ struct drm_display_mode *mode, u32 edge1)
+{
+ struct sun4i_tcon *tcon = dsi->tcon;
+ unsigned long dclk_rate, dclk_parent_rate, tcon0_div;
+
+ dclk_rate = clk_get_rate(tcon->dclk);
+ dclk_parent_rate = clk_get_rate(clk_get_parent(tcon->dclk));
+ tcon0_div = dclk_parent_rate / dclk_rate;
+
+ return (edge1 + (mode->hdisplay + 40) * tcon0_div / 8);
+}
+
+static u32 sun6i_dsi_get_line_num(struct sun6i_dsi *dsi,
+ struct drm_display_mode *mode)
+{
+ struct mipi_dsi_device *device = dsi->device;
+ unsigned int bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+
+ return (mode->htotal * bpp / (8 * device->lanes));
+}
+
static int sun6i_dsi_get_drq(struct sun6i_dsi *dsi,
struct drm_display_mode *mode)
{
@@ -499,9 +534,32 @@ static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi,
static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
struct drm_display_mode *mode)
{
- regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG,
- SUN6I_DSI_TCON_DRQ_ENABLE_MODE |
- SUN6I_DSI_TCON_DRQ_SET(sun6i_dsi_get_drq(dsi, mode)));
+ struct mipi_dsi_device *device = dsi->device;
+ u32 sync_point = 40;
+ u32 line_num = sun6i_dsi_get_line_num(dsi, mode);
+ u32 edge1 = sun6i_dsi_get_edge1(dsi, mode, sync_point);
+ u32 edge0 = sun6i_dsi_get_edge0(dsi, mode, edge1);
+ u32 val;
+
+ if (edge1 > line_num)
+ edge1 = line_num;
+
+ if (edge0 > line_num)
+ edge0 -= line_num;
+ else
+ edge0 = 1;
+
+ regmap_write(dsi->regs, SUN6I_DSI_BURST_DRQ_REG,
+ SUN6I_DSI_BURST_DRQ_EDGE1(edge1) |
+ SUN6I_DSI_BURST_DRQ_EDGE0(edge0));
+ regmap_write(dsi->regs, SUN6I_DSI_BURST_LINE_REG,
+ SUN6I_DSI_BURST_LINE_NUM(line_num) |
+ SUN6I_DSI_BURST_LINE_SYNC_POINT(sync_point));
+
+ /* enable burst mode */
+ regmap_read(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, &val);
+ val |= SUN6I_DSI_BASIC_CTL_VIDEO_BURST;
+ regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, val);
}

static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
@@ -726,7 +784,13 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
SUN6I_DSI_BASIC_CTL1_VIDEO_PRECISION |
SUN6I_DSI_BASIC_CTL1_VIDEO_MODE);

- sun6i_dsi_setup_burst(dsi, mode);
+ regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG,
+ SUN6I_DSI_TCON_DRQ_ENABLE_MODE |
+ SUN6I_DSI_TCON_DRQ_SET(sun6i_dsi_get_drq(dsi, mode)));
+
+ if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+ sun6i_dsi_setup_burst(dsi, mode);
+
sun6i_dsi_setup_inst_loop(dsi, mode);
sun6i_dsi_setup_format(dsi, mode);
sun6i_dsi_setup_timings(dsi, mode);
--
2.18.0.321.gffc6fa0e3
\
 
 \ /
  Last update: 2018-11-16 17:41    [W:0.096 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site