lkml.org 
[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/12] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection
Date
Instruction loop selection would require before writing
loop number registers, so enable idle, LP11 bits on
loop selection register.

Reference code available in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

(dsi_dev[sel]->dsi_inst_loop_sel.dwval = 2<<(4*DSI_INST_ID_LP11) |
3<<(4*DSI_INST_ID_DLY);

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 43ab7127d428..3ac002c4d8b3 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -438,6 +438,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
{
u16 delay = sun6i_dsi_setup_inst_delay(dsi, mode);

+ regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
+ DSI_INST_ID_HSC << (4 * DSI_INST_ID_LP11) |
+ DSI_INST_ID_HSD << (4 * DSI_INST_ID_DLY));
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0),
SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
SUN6I_DSI_INST_LOOP_NUM_N1(delay));
--
2.18.0.321.gffc6fa0e3
\
 
 \ /
  Last update: 2018-11-16 17:40    [W:0.186 / U:7.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site