[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 00/12] drm/sun4i: Allwinner MIPI-DSI Burst mode support
This series support MIPI-DSI Burst mode on Allwinner platform, which
is tested in burst supported panel in Pine64-LTS board.

Series fixed few code changes commented in previous version[1] and
it depends on A64 MIPI-DSI series[2]

Changes for v2:
- add separate function for setup_inst_delay computation
- moved instruction loop seletion below delay compuation
- add separate function for dsi_get_timings and call for non-burst mode
- simplify burst mode timings compuatation
- add new patches, for tcon0 probing during dsi_bind
- add code to get the tcon0 divider value
- add multiple functions to get line_num, edge0, edge1
- squash 'enable burst mode' patch into 'Setup burst mode'
- fixed commit message of 'Enable burst mode HBP, HSA_HSE'
- collect Rob R-b tag on panel dt-bindings patch
- panel driver changes,
- dropped unneeded include files
- s/fy07024di26a30d/feiyang function, variable names
- use DRM_DEV_ERROR in panel driver
- add set_display_on .enable
- moved regulator enablement to .prepare
- handle erro statements and release them properly during probe
- remove panel if mipi_dsi_attach failed
- update MAINTAINERS file about the panel
- add comments on dts about exact regulators used in schematics


Any inputs,

Jagan Teki (12):
drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction
drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection
drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings
drm/sun4i: sun6i_mipi_dsi: Simplify drq set to support all modes
drm/sun4i: tcon: Export get tcon0 routine
drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind
drm/sun4i: sun6i_mipi_dsi: Setup burst mode
drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane burst mode
drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE
dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
[DO NOT MERGE] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI

.../display/panel/feiyang,fy07024di26a30d.txt | 20 ++
.../dts/allwinner/sun50i-a64-pine64-lts.dts | 37 +++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../drm/panel/panel-feiyang-fy07024di26a30d.c | 286 ++++++++++++++++++
drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 +-
drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 264 ++++++++++++----
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 1 +
10 files changed, 567 insertions(+), 61 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c


 \ /
  Last update: 2018-11-16 17:40    [W:0.202 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site