lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] powerpc/mm: dump block address translation on book3s/32
From
Date


Le 15/11/2018 à 12:46, Michael Ellerman a écrit :
> Christophe Leroy <christophe.leroy@c-s.fr> writes:
>
>> This patch adds a debugfs file to dump block address translation:
>>
>> ~# cat /sys/kernel/debug/block_address_translation
>
> My instinct is it should be in /sys/kernel/debug/powerpc. But I guess
> the other page table dump files are not.

Lol.

Looks like we have the same instinct ...

But you rejected my patch https://patchwork.ozlabs.org/patch/750426/ :)


>
>> Instruction Block Address Translations:
>> 0: -
>> 1: -
>> 2: 0xc0000000-0xcfffffff 0x00000000 Kernel EXEC coherent
>> 3: 0xd0000000-0xdfffffff 0x10000000 Kernel EXEC coherent
>> 4: -
>> 5: -
>> 6: -
>> 7: -
>>
>> Data Block Address Translations:
>> 0: -
>> 1: -
>> 2: 0xc0000000-0xcfffffff 0x00000000 Kernel RW coherent
>> 3: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent
>> 4: -
>> 5: -
>> 6: -
>> 7: -
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> Tested on mpc8321 aka 603
>> Please review/test the 601 part
>>
>> arch/powerpc/mm/Makefile | 2 +-
>> arch/powerpc/mm/dump_bats.c | 176 ++++++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 177 insertions(+), 1 deletion(-)
>> create mode 100644 arch/powerpc/mm/dump_bats.c
>>
>> diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
>> index ca96e7be4d0e..2adad10b5856 100644
>> --- a/arch/powerpc/mm/Makefile
>> +++ b/arch/powerpc/mm/Makefile
>> @@ -47,7 +47,7 @@ ifdef CONFIG_PPC_PTDUMP
>> obj-$(CONFIG_4xx) += dump_linuxpagetables-generic.o
>> obj-$(CONFIG_PPC_8xx) += dump_linuxpagetables-8xx.o
>> obj-$(CONFIG_PPC_BOOK3E_MMU) += dump_linuxpagetables-generic.o
>> -obj-$(CONFIG_PPC_BOOK3S_32) += dump_linuxpagetables-generic.o
>> +obj-$(CONFIG_PPC_BOOK3S_32) += dump_linuxpagetables-generic.o dump_bats.o
>
> BOOK3S_32 covers quite a lot of CPUs.
>
> But below the only check is that you're on 601 or 603.
>
> So is the 603 code going to work on all other BOOK3S_32 CPUs?

If I understand function setbat() correctly, it should.

See
https://elixir.bootlin.com/linux/v4.20-rc1/source/arch/powerpc/mm/ppc_mmu_32.c#L115
Tell me if you see something I missed.

Christophe

>
> cheers
>
>> diff --git a/arch/powerpc/mm/dump_bats.c b/arch/powerpc/mm/dump_bats.c
>> new file mode 100644
>> index 000000000000..824a94ee9051
>> --- /dev/null
>> +++ b/arch/powerpc/mm/dump_bats.c
>> @@ -0,0 +1,176 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright 2018, Christophe Leroy CS S.I.
>> + * <christophe.leroy@c-s.fr>
>> + *
>> + * This dumps the content of BATS
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/fs.h>
>> +#include <linux/hugetlb.h>
>> +#include <linux/io.h>
>> +#include <linux/mm.h>
>> +#include <linux/sched.h>
>> +#include <linux/seq_file.h>
>> +#include <asm/fixmap.h>
>> +#include <asm/pgtable.h>
>> +#include <linux/const.h>
>> +#include <asm/page.h>
>> +#include <asm/pgalloc.h>
>> +
>> +#include <asm/book3s/32/mmu-hash.h>
>> +
>> +static char *pp_601(int k, int pp)
>> +{
>> + if (pp == 0)
>> + return k ? "NA" : "RWX";
>> + if (pp == 1)
>> + return k ? "ROX" : "RWX";
>> + if (pp == 2)
>> + return k ? "RWX" : "RWX";
>> + return k ? "ROX" : "ROX";
>> +}
>> +
>> +static void bat_show_601(struct seq_file *m, int idx, u32 lower, u32 upper)
>> +{
>> + u32 blpi = upper & 0xfffe0000;
>> + u32 k = (upper >> 2) & 3;
>> + u32 pp = upper & 3;
>> + u32 pbn = lower & 0xfffe0000;
>> + u32 bsm = lower & 0x3ff;
>> + u32 size = (bsm + 1) << 17;
>> +
>> + seq_printf(m, "%d: ", idx);
>> + if (!(lower & 0x40)) {
>> + seq_puts(m, " -\n");
>> + return;
>> + }
>> +
>> + seq_printf(m, "0x%08x-0x%08x ", blpi, blpi + size - 1);
>> + seq_printf(m, "0x%08x ", pbn);
>> +
>> + seq_printf(m, "Kernel %s User %s", pp_601(k & 2, pp), pp_601(k & 1, pp));
>> +
>> + if (lower & _PAGE_WRITETHRU)
>> + seq_puts(m, "write through ");
>> + if (lower & _PAGE_NO_CACHE)
>> + seq_puts(m, "no cache ");
>> + if (lower & _PAGE_COHERENT)
>> + seq_puts(m, "coherent ");
>> + seq_puts(m, "\n");
>> +}
>> +
>> +#define BAT_SHOW_601(_m, _n, _l, _u) bat_show_601(_m, _n, mfspr(_l), mfspr(_u))
>> +
>> +static int bats_show_601(struct seq_file *m, void *v)
>> +{
>> + seq_puts(m, "Block Address Translation:\n");
>> +
>> + BAT_SHOW_601(m, 0, SPRN_IBAT0L, SPRN_IBAT0U);
>> + BAT_SHOW_601(m, 1, SPRN_IBAT1L, SPRN_IBAT1U);
>> + BAT_SHOW_601(m, 2, SPRN_IBAT2L, SPRN_IBAT2U);
>> + BAT_SHOW_601(m, 3, SPRN_IBAT3L, SPRN_IBAT3U);
>> +
>> + return 0;
>> +}
>> +
>> +static void bat_show_603(struct seq_file *m, int idx, u32 lower, u32 upper, bool is_d)
>> +{
>> + u32 bepi = upper & 0xfffe0000;
>> + u32 bl = (upper >> 2) & 0x7ff;
>> + u32 k = upper & 3;
>> + u32 brpn = lower & 0xfffe0000;
>> + u32 size = (bl + 1) << 17;
>> +
>> + seq_printf(m, "%d: ", idx);
>> + if (k == 0) {
>> + seq_puts(m, " -\n");
>> + return;
>> + }
>> +
>> + seq_printf(m, "0x%08x-0x%08x ", bepi, bepi + size - 1);
>> + seq_printf(m, "0x%08x ", brpn);
>> +
>> + if (k == 1)
>> + seq_puts(m, "User ");
>> + else if (k == 2)
>> + seq_puts(m, "Kernel ");
>> + else
>> + seq_puts(m, "Kernel/User ");
>> +
>> + if (lower & BPP_RX)
>> + seq_puts(m, is_d ? "RO " : "EXEC ");
>> + else if (lower & BPP_RW)
>> + seq_puts(m, is_d ? "RW " : "EXEC ");
>> + else
>> + seq_puts(m, is_d ? "NA " : "NX ");
>> +
>> + if (lower & _PAGE_WRITETHRU)
>> + seq_puts(m, "write through ");
>> + if (lower & _PAGE_NO_CACHE)
>> + seq_puts(m, "no cache ");
>> + if (lower & _PAGE_COHERENT)
>> + seq_puts(m, "coherent ");
>> + if (lower & _PAGE_GUARDED)
>> + seq_puts(m, "guarded ");
>> + seq_puts(m, "\n");
>> +}
>> +
>> +#define BAT_SHOW_603(_m, _n, _l, _u, _d) bat_show_603(_m, _n, mfspr(_l), mfspr(_u), _d)
>> +
>> +static int bats_show_603(struct seq_file *m, void *v)
>> +{
>> + seq_puts(m, "Instruction Block Address Translation:\n");
>> +
>> + BAT_SHOW_603(m, 0, SPRN_IBAT0L, SPRN_IBAT0U, false);
>> + BAT_SHOW_603(m, 1, SPRN_IBAT1L, SPRN_IBAT1U, false);
>> + BAT_SHOW_603(m, 2, SPRN_IBAT2L, SPRN_IBAT2U, false);
>> + BAT_SHOW_603(m, 3, SPRN_IBAT3L, SPRN_IBAT3U, false);
>> + if (mmu_has_feature(MMU_FTR_USE_HIGH_BATS)) {
>> + BAT_SHOW_603(m, 4, SPRN_IBAT4L, SPRN_IBAT4U, false);
>> + BAT_SHOW_603(m, 5, SPRN_IBAT5L, SPRN_IBAT5U, false);
>> + BAT_SHOW_603(m, 6, SPRN_IBAT6L, SPRN_IBAT6U, false);
>> + BAT_SHOW_603(m, 7, SPRN_IBAT7L, SPRN_IBAT7U, false);
>> + }
>> +
>> + seq_puts(m, "\nData Block Address Translation:\n");
>> +
>> + BAT_SHOW_603(m, 0, SPRN_DBAT0L, SPRN_DBAT0U, true);
>> + BAT_SHOW_603(m, 1, SPRN_DBAT1L, SPRN_DBAT1U, true);
>> + BAT_SHOW_603(m, 2, SPRN_DBAT2L, SPRN_DBAT2U, true);
>> + BAT_SHOW_603(m, 3, SPRN_DBAT3L, SPRN_DBAT3U, true);
>> + if (mmu_has_feature(MMU_FTR_USE_HIGH_BATS)) {
>> + BAT_SHOW_603(m, 4, SPRN_DBAT4L, SPRN_DBAT4U, true);
>> + BAT_SHOW_603(m, 5, SPRN_DBAT5L, SPRN_DBAT5U, true);
>> + BAT_SHOW_603(m, 6, SPRN_DBAT6L, SPRN_DBAT6U, true);
>> + BAT_SHOW_603(m, 7, SPRN_DBAT7L, SPRN_DBAT7U, true);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int bats_open(struct inode *inode, struct file *file)
>> +{
>> + if (PVR_VER(mfspr(SPRN_PVR)) == 1)
>> + return single_open(file, bats_show_601, NULL);
>> +
>> + return single_open(file, bats_show_603, NULL);
>> +}
>> +
>> +static const struct file_operations bats_fops = {
>> + .open = bats_open,
>> + .read = seq_read,
>> + .llseek = seq_lseek,
>> + .release = single_release,
>> +};
>> +
>> +static int bats_init(void)
>> +{
>> + struct dentry *debugfs_file;
>> +
>> + debugfs_file = debugfs_create_file("block_address_translation", 0400,
>> + NULL, NULL, &bats_fops);
>> + return debugfs_file ? 0 : -ENOMEM;
>> +}
>> +device_initcall(bats_init);
>> --
>> 2.13.3

\
 
 \ /
  Last update: 2018-11-15 12:58    [W:0.112 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site