lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v1 7/7] clk: meson: meson8b: allow changing the CPU clock tree
Date
Currently all clocks in the CPU clock tree are marked as read-only
(using the corresponding _ro_ clk_ops). This was correct since changing
the clock tree could cause the system to lock up.
Switch all clocks to their corresponding clk_ops variant which is not
read-only to allow changing the CPU clock tree since the bug which
locked up the system is now fixed (by switching the CPU clock temporary
to run off XTAL while changing the CPU clock tree).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/meson8b.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index c06a1a7faa4c..b3bdc7e05441 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -203,7 +203,7 @@ static struct clk_regmap meson8b_sys_pll_dco = {
},
.hw.init = &(struct clk_init_data){
.name = "sys_pll_dco",
- .ops = &meson_clk_pll_ro_ops,
+ .ops = &meson_clk_pll_ops,
.parent_names = (const char *[]){ "xtal" },
.num_parents = 1,
},
@@ -218,7 +218,7 @@ static struct clk_regmap meson8b_sys_pll = {
},
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
- .ops = &clk_regmap_divider_ro_ops,
+ .ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "sys_pll_dco" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -552,7 +552,7 @@ static struct clk_regmap meson8b_cpu_in_sel = {
},
.hw.init = &(struct clk_init_data){
.name = "cpu_in_sel",
- .ops = &clk_regmap_mux_ro_ops,
+ .ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "xtal", "sys_pll" },
.num_parents = 2,
.flags = (CLK_SET_RATE_PARENT |
@@ -606,7 +606,7 @@ static struct clk_regmap meson8b_cpu_scale_div = {
},
.hw.init = &(struct clk_init_data){
.name = "cpu_scale_div",
- .ops = &clk_regmap_divider_ro_ops,
+ .ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "cpu_in_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
@@ -623,7 +623,7 @@ static struct clk_regmap meson8b_cpu_scale_out_sel = {
},
.hw.init = &(struct clk_init_data){
.name = "cpu_scale_out_sel",
- .ops = &clk_regmap_mux_ro_ops,
+ .ops = &clk_regmap_mux_ops,
/*
* NOTE: We are skipping the parent with value 0x2 (which is
* "cpu_div3") because it results in a duty cycle of 33% which
@@ -646,7 +646,7 @@ static struct clk_regmap meson8b_cpu_clk = {
},
.hw.init = &(struct clk_init_data){
.name = "cpu_clk",
- .ops = &clk_regmap_mux_ro_ops,
+ .ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "xtal",
"cpu_scale_out_sel" },
.num_parents = 2,
--
2.19.1
\
 
 \ /
  Last update: 2018-11-14 23:58    [W:0.088 / U:4.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site