lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 01/73] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
Date
From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 202dc3cc10b4d37e5251431acf8d5040a8876c7d ]

On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on
R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before
the DMA channel pointer is initialized. Hence this fails, and the
driver tries to fall back to PIO. However, at this early phase in the
initialization sequence, fallback to PIO does not work, leading to a
serial port that cannot receive any data.

Fix this by calling sci_submit_rx() after initialization of the DMA
channel pointer.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/sh-sci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ab3f6e91853d..e19bfbba8a01 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port)
hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
s->rx_timer.function = rx_timer_fn;

+ s->chan_rx_saved = s->chan_rx = chan;
+
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
sci_submit_rx(s);
-
- s->chan_rx_saved = s->chan_rx = chan;
}
}

--
2.17.1
\
 
 \ /
  Last update: 2018-11-14 23:22    [W:0.235 / U:7.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site